Top Flow Metering Pump

Peristaltic Pump Three Rollers 500mL/M Dosing Pump Geared Motor Lab Peristaltic Pump Aquarium Drip Metering Pump with Base(24V)

• 【Removable Pump Head】The pump head of three rollers proportional pump has ball bearings wheel frame,quiet and long service life,with transparent PC removable pump head.
• 【Accurate and Stable Delivery】The experimental liquid distribution pump adopts the screw clasp design,detachable while keeping the conveying stable, which is convenient to replace the hose.
• 【Fixed Seat】Our transparent PC head liquid pump has two types,12V/24V (optional),each one has Fixed Seat to make sure Low noise quantitative pumping medium.
• 【Effective Performance】Roller peristaltic pump has set the card slot to prevent deviation correction and pump damage,and adopt flat installation method, easy to install and remove,with small pulsation, rust and corrosion resistant.
• 【Scope of Application】These small metering pumps have self-priming function and can be widely used in experiments, biochemical analysis, pharmaceuticals, fine chemicals, and biotechnology fields.

Makita EK7301X1 14' 73 cc Power Cutter with Diamond Blade

• Improved decompression valve and metering spring for precise fuel regulation at start up..
• Ignition coil with start-support function stores electrical energy with each pull for easier start ups.
• On-Off-Choke operation switch on a single lever for operator convenience.
• Five stage filtration system with advanced directional air flow, provides cleaner air for better saw performance.
• Starter grip decompression valve for faster starting.
• Carburetor engineered with improved deco-valve and metering spring for precise fuel regulation at start up.
• Reinforced aluminum blade guard with 70 Degrees range of limitless positioning using a marked knob handle.
• Cutting arm position simply changes from center position to flush outboard position allowing cuts directly adjacent to work.
• New ignition coil with start-support function stores electrical energy with each pull for easier start ups.
• Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank.

Irritrol 205 in-Line Valve with Flow Control 1 in Slip | 205SF

• Patented floating metering system - Allows this valve to easily handle dirty water.
• High-flow, low friction loss design combined with low-flow capability - Can handle a wide range of applications.
• Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
• Internal and external bleed (flush mode) - Allows for manual operation.
• Available in female NPT or slip configurations.

Washer Front Load Water Level Switch Sensor W10156252 Compatible with Whirlpool Kenmore Maytag

• ONE SIZE FITS ALL CLAMP-ON INSTALLATION: Non-Invasive and designed to work on residential and commercial properties on 3/4″ to 2"Copper L&M, PVC SCH....
• CUSTOM LIVE FLOW ALERTING: bluebot doesn't limit your alerting preferences to pre-configured leaks. Create unlimited custom alerts based on flow over....
• NO HIDDEN FEES: No subscription fees, live and historic data are included free. No surprise plumbing or electrician fees. No "island time"..
• DOLLARIZE AND BUDGET IN REAL-TIME: Get real-time live flow data within seconds. People think in dollars, not gallons--view your flow in dollars and....
• USAGE/COST ALLOCATION SUB METERING: Monitor multiple water lines and properties from one account with no additional fees. Perfect for independent....

JEREPET 800GPH 30W16FT Aquarium 24V DC Water Pump with Controller, Submersible and Inline Return Pump for Fish Tank,Aquariums,Fountains,Sump,Hydroponic,Pond,Freshwater and Marine Water Use

• Specifications：800GPH Max flow aquarium pump, ECO 28W DC24V return pump,12.5 feet max lift.
• pump dimension (L*Wx*H):5.4*2.6*3.4 inches.NOTE :The data of max flow mean the flow when use the largest nozzle at 0 ft lift.
• DC controllable water pump：6 speed adjustable,control the flow from 30% to 100% of max flow,with 10 minutes feeding mode and wave maker function.
• Ultra quiet aquarium water pump:used seal impeller and ceramic shaft,efficient and quiet operation, nosie level lower than 30 dba.
• Auto shut off protection return pump: the pump will automatically shut off when the pump run dry or blocked.
• NOTE:please check the light status of controller and power supply if the pump don't work, and check the user manual for reference.
• Wide applicaion DC pump: can be used as salt water or fresh water aquarium sump pump, fountain pump,hydroponics pump and waterfall pump.
• can be used as external/inline or submersible pump.

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

• ★【ELECTRIC FUEL PUMP KIT MATERIAL: 】External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life..
• ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
• ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
• ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
• ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process....

Walchem Metering Pump Model EZB11D1-VC 0.6 GPH 150 PSI 115VAC 3/8 inch OD tubing Connections

RX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

• 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
• 2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
• 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
• 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
• 5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..

Electric Drill Pump for Water Gasoline Oil Diesels Fluid Transfer Pump Mini Hand Self-Priming Quick Pumping Speed

• High quality drill pump- Fine workmanship, plastic, durable and has a long service life..
• Feature- Large flow, stable performance and high efficiency, easy installation..
• Quick- Pumping speed is fast, can pump 20-30 L water per minute(depends on the rpm of drill)..
• Convenient to use and store- Install all the drill chucks, you can use the electric drill to get the pump, easy and convenient to use. Compact and light weight design, portable and easy to store..
• Flow speed- The recommended speed is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow. 1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute. 3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute..

Amiarc Portable Electric Drill Pump, Self Priming Water Transfer Pump Hand Drill Driven Pump Small Household Pump with Two Connectors Centrifugal Pump for Transfer Oil, Fluid Diesel, Kerosene

• ...l all the drill chucks, you can use the electric drill to get the pump, easy and convenient installation. Compact and light in weight, convenient and labor-saving, portable and easy to store, this electric drill powered pump is suitable for home, garden and outdoor..
• Large flow - Stable performance and high efficiency. The recommended speed of our drill pump is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow. 1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute. 3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute..
• Wide Application - Works great with most electric hand drills , Just connect water pipe with hose clamp and insert the electric drill to use the water transfer pump. Electric drill pump is suitable for transporting light liquids such as water, oil, diesel, liquid fertilizers, etc., and can also be used for car cleaning, gardens, lawn watering, pumping and drainage, etc..

Unicornioext 1/8in 1/4in 3/8in 1/2in NPT Female Equal Straight 304 Stainless Steel Needle Valve Water Gas Oil Flow Control

• A Needle Valve Is Used Usually in Flow Metering Applications Where a Constant Calibrated or Low Flow Rate Should Be Maintained for Some Time. E.G., Idle Fuel Flow in A Carburetor. They Are Very Commonly Used to Provide Shutoff for A Pressure Gauge..
• This Valve Features a Needle Shaped Handle Which Makes It Easy to Shut Off Even When the Pressures Are High..
• Constructed Out of High-Quality Lead-Free Brass..
• For Use on Portable Water, Instrumentation, Hydraulic and Pneumatic Systems. Not Intended for Natural Gas Or LPG..

Eemax EEM24036 Electric Tankless Water Heater, 36Kw, Blue

• Cut energy costs - flow switch activates heater only on demand.
• Ease of installation - No T&P valve needed.
• Compatible with Hands-Free, Sensor, and Metering Faucets.