Top Fluid Control Valves

Cardone 28-6653 Remanufactured Power Steering Control Valve

  • Units are supplied with all new O.E. style seals and O-rings to eliminate chance of leaks.
  • Each Control Valve is computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure quiet, like-new performance.
  • CARDONE Remanufactured Power Steering Control Valves provide a reliable solution to replace your original defective unit..
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Check Stock

Bennett V351HPU1 Hydraulic Power Unit - 12 Volt

  • Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs.
  • Employs two solenoid valves to direct the flow of fluid to the actuators.
  • Solenoid valves lock tightly to secure the tabs in place.
  • Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

LUBEGARD M-V Automatic Transmission Oil Fluid Supplement Mercon-V Synthetic ATF 3 pack

  • Enhances DEXRON III/ MERCON ATF to perform like a MERCON V ATF, Eliminating the need for MERCON V ATF.
  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit, Dramatically reduces friction and tightens the shift cycle without loosing the friction.
  • Eliminates transmission fluid foaming and oxidation, Optimizes total transmission performance, Extends fluid life.
  • Eliminates clutch chatter and torque converter shudder, Eliminates objectionable noises during shifts, Softens and modifies harsh shifts.
  • Keeps valves and governors free and frees stuck valves in valve bodies, Superior seal compatibility and conditioning, Only protectant that increases the fluid's ability to transfer heat.
Check Stock

Lubegard 62005 M-V ATF Supplement 10 oz.

  • Enhances DEXRON III/ MERCON ATF to perform like a MERCON V ATF, Eliminating the need for MERCON V ATF.
  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit, Dramatically reduces friction and tightens the shift cycle....
  • Eliminates transmission fluid foaming and oxidation, Optimizes total transmission performance, Extends fluid life.
  • Eliminates clutch chatter and torque converter shudder, Eliminates objectionable noises during shifts, Softens and modifies harsh shifts.
  • Keeps valves and governors free and frees stuck valves in valve bodies, Superior seal compatibility and conditioning, Only protectant that increases....
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

International Door Closers Model 212 BODY ONLY Fixed ADA (Handicap) with 8.5lb. spring tension Overhead Concealed Closer for Exterior Doors - 90 Degree Backstop with Hold-Open function for Center Hung Doors

  • 90 Degree Backstop with (HO) Hold Open - ADA 8.5lb opening force - Exterior Door.
  • Suitable for Exterior Doors from (36" to 48" x 96") - Two Speed Control Valves.
  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • ADA (Handicap) 8.5lb opening force. For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

International Door Closers Model 201 BODY ONLY Fixed ADA (Handicap) with 5lb spring tension Overhead Concealed Closer for Interior Doors - 105 Degree Backstop with No Hold-Open function for Center Hung Doors

  • 105 Degree Backstop (NHO) No Hold Open - ADA (Handicap) 5lb. opening force - Interior Door.
  • Suitable for Interior Doors from (36" to 48" x 96") - Two Speed Control Valves.
  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • ADA (Handicap) 5lb. opening force. For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

International Door Closers Model 211 BODY ONLY Fixed ADA (Handicap) with 8.5lb apring tension Overhead Concealed Closer for Exterior Doors - 105 Degree Backstop with No Hold-Open function for Center Hung Doors

  • 105 Degree Backstop (NHO) No Hold Open - ADA 8.5lb opening force - Exterior Door.
  • Suitable for Exterior Doors from (36" to 48" x 96") - Two Speed Control Valves.
  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • ADA (Handicap) 8.5lb opening force - For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

3 Pcs Float Ball Valve, 1/2 Inch Water Tank Filter Float Ball Valve, Mini Supply Tube Water Float Valve with Adjustable Arm for Pool, Livestock Water Trough, Aquariums, Aquaculture (Black)

  • Package quantity: 3 packs water tank float valves, which aim to reduce the time spent on filling and checking the water tank, sealing effect and high pressure.
  • Using a smaller float control device, which can withstand greater fluid pressure.
  • Adjustable arm: the micro float valve has an adjustable arm which is made of sturdy ABS, rugged and durable, rust-proof and corrosion-resistant, can be adjusted over 180 degrees.
  • Dimension: the float ball valve has a 1/ 2 NPT thread, this is common in the pipeline world and the thread size is approx. 3/ 4 inch (with standard washer) to eliminate leakage.
  • No power or pump required: the water float valves are applicable for low pressure gravity water supply systems.
  • No power or pump required, hand tightening for leak-free operation.
  • Wide range of use: the sink float valve is suitable for ponds, chickens, livestock pools, aquariums, fish and vegetables symbiosis, aquaculture, hydroponic reservoirs, and its adaptability is more than traditional metal float valves.
Check Stock

International Door Closers Model 312 BODY ONLY Fixed ADA (Handicap) Multi-sized Overhead Concealed Closer for Exterior Doors - 105 Degree Backstop with Hold-Open function w/range of sizes 8.5lbs of Opening Force to medium spring tension

  • 90 degree Backstop (HO) Hold Open - Multi-sized closer w/Adjustable Spring Power for range of sizes.
  • Adjustable OHC from 8.5lbs of Opening Force to medium spring tension..
  • Adjustable after installation. Closing and Latching speeds controlled by separate regulating valves..
  • ADA (Handicap) with 8.5 lb opening force for use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climate. Two Speed Control Valves fully adjustable..
Check Stock