Top Flute Pipe Punching Machine

LainKeen Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4", Exhaust Pipe Expander Stretcher Tool Set, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • ...or a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

Rochix Flute Cleaner Care Cleaning Kit,Maintenance Kit,Key Oil,Cork Grease,Swab,Cleaning Cloth,Cleaning Brush,Cleaning Rod(Random Color Cloths)

  • Swab:Enter the pipe body through the pendant to clean the moisture in the pipe,the operation is easy and natural(random color cloths).
  • Key oil:Maintain the key levers,the keys will be more flexible while playing. It can effectively reduce the wear between the shaft and the shaft sleeve,increase the service life of the instrument.
  • Cleaning brush:Clean the inner cavity of flute,easy to use,the hair is soft,cleans thoroughly,does not damage the inner cavity.
  • Cleaning rod:The cleaning rod is used with a cleaning cloth,which can effectively clean and wipe the moisture in the inner cavity of flute.
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Rayson PT1202 Binding Machine, 3:1 Pitch, 32-Holes, Punch 12 Sheets with Sturdy Metal Construction

  • Punching holes quantity: 32 holes and Square hole size: 0.15"×0.15"(4x4mm).
  • After punching, it can be bound with 3:1 pitch coil binding spines and 3:1 pitch click binding spines.
  • Max. Punching capacity: 12 sheets (80gsm/20lb).
  • Max. punching paper Size: letter size (8.5×11.0").
  • Durable Metal Construction for Long-Lasting Use, which is a great value for money.
  • Including 1pc of punching machine, some of coil binding spines and some click binding spines.
  • Tips: Rayson's binding machine comes with oiled cutting blade for protecting the punch die away from rusting. To avoid staining on the important document, please use oiled removing paper(enclosed ) to punch first in order to clean up the blades.
Check Stock

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
  • Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...itish Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
  • Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who works with pipes and fittings. Use them to create new threads or repair damaged thread....
Check Stock

KSEIBI Step Drill Bit Set 5 Pieces Pack High Speed Steel Black Oxide M2 Multiple Hole 50 Sizes 1/8-1-3/8 inch SAE Standard Drill Attachment (KS-575105)

  • These HSS Double-Fluted Step bit kit provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes..
  • Drills clean, accurate large holes in these materials (up to 1-3/8in. diameter) hard sheet metal, ducts, steel, stainless steel, copper, brass, aluminum, plastic, plexiglass, wood, firewood, veneers, vinyl siding, acrylic, plasterboard, PVC pipe, , fiberglass and cast iron, Ideal for electrical, plumbing and HVAC contractors..
  • M2 high speed steel along with the black coating ensures extreme durability, will stay new and shiny for years to come. Different sized shanks ensure compatibility with 3-Flat Hex Shank - Prevents bit from slipping in the chuck while drilling holes 1/4, 3/8 and 1/2 in. chuck size..
  • Step drill bit can be used on electrical drill, cordless drill, or high impact drill press machine, combo set with durable ABS plastic organizer for easy and safe storage in your tool box..
  • Dual-flute design provides greater speed and control and optimized for cordless drills driver running at high speed.
Check Stock

VEVOR Manual Wire Binder Machine A4, Wire Binding Machine 120 Sheet, with Wire Binding Set Insert 34 Holes for Office, Store

  • Efficient Punching: With 34 punching holes, 12-sheet punching capacity and 120-sheet binding capacity, this tool drills through 120 sheets of paper with ease. Hard alloy blade for accurate and fast punching..
  • Margin Adjustable: The edge distance can be adjusted to suit different binding methods and meet different binding needs. Edge distance adjustable: 2.5 mm, 4.5 mm, 6.5 mm..
  • 2 in 1 Design: 2 in 1 manual bookbinding machine and hole punch.
  • You can twist position knob to secure paper and form symmetrical holes..
  • Easy to Use: The handle design is easy to operate, and it can punch and staple quickly. A paper waste tray is for convenient waste disposal, wire binding set collects your paper quickly..
  • Wide Application: The spiral binding machine is a professional binding machine for binding and punching reports, documents, papers, manuals, etc. It is widely used in graphic stores, schools, offices, publishers, or conference documents..
Check Stock

OBPSFY 5PCS BSP Pipe Tap Set,Bearing Steel Threading Taps Tool for clean/re-thread damaged/Jam Pipe threads（1/8\

  • * Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.5 Different Sizes ，great for tapping various threads, meet your different needs..
  • * BSP Pipe taps are used to cut new threads or repair damaged threads / jam pipe threads and have excellent results,it is the best choice for your toolbox..
  • * In accordance with National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8.
Check Stock

General Tools 196 Short Length Hand Reamer & Countersink, 3/4'

  • REMOVES BURRS: from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 3/4" inner diameter.
  • ENLARGE & COUNTERSINK HOLES: In wood, brass, plastic and other materials with little effort.
  • DURABLE: Compact ¾“ five-flute tool steel cutter makes fast work of deburring plastic, copper, iron pipe or sheet metal.
  • HANDLE: Heavy-duty, ergonomically designed handle.
  • PERFECT FOR SMALL JOBS: Tool has an overall length of 5-1/8 inches.
Check Stock