Top Flux For Soldering Electronics

3 Pieces No Clean Soldering Flux Pen Rosin Solder Flux Pen for Electronics Tabbing Wiring Solder, Welding Maintenance of PCB Board, No

  • Quantity and size: package contains 3 pieces soldering flux pens, enough quantity for meeting your daily usage and replacement.
  • Each soldering flux pen measures approx. 5.6 inches in length.
  • Safe to use: these flux pens are made of quality material, no leak and safe to use.
  • Low solids content and quality of the activator system results in practically no residue left on the assembly after soldering.
  • No residue will interfere with electrical testing.
  • Useful and practical: no clean soldering flux pen is a novel tool for rework and repair welding.
  • It allows controlled application of flux, thereby removing dirt in the flux bottle.
  • Pen tip of 10 ml with practical designed felt tip.
  • The solid content is low and there is almost no residue.
  • Wide application: rosin solder flux pen is suitable for automotive, computer, work for rework, and through hole solder joints.
  • It is lightweight and would not occupy too much space, suitable pocket size to carry.
  • How to use: before the first time use, you should press the pen tip 1 - 2 times for releasing air, then use no clean solder flux pen to remove the oxidizing wax.
  • After that, you can use the alcohol to clean the pen.
Check Stock

Handy Flux, 7 Ounce Jar with Brush

  • Function: Soldering electronic components. Anti-oxidation flux. Better welding fluidity. Easy to tin, easy to solder, strong welding..
  • Feature: Non-toxic, no corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Application: Soldering flux is suitable for welding on instruments, meters, gold, copper, iron, tin and other metals. Widely used in phone PCB, SMD, SMT patch and appliance repair..
Check Stock

Soldering Iron Kit, 80W Digital LCD Solder Gun with ON/OFF Switch Adjustable Temperature Controlled and Fast Heating Thermostatic Design Welding Tools for Electronics

  • ...ron tips, hight quality 50g/0.8mm tin wire, stainless steel stand, highly absorbent sponge pad. With them, you can carry out welding and repair work at any time without having to purchase other accessories.
  • 【Wide Range of Applications】: The soldering iron sets are suitable for DIY, various repaired usage of electronics and circuit board, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories! It suitable for beginner study electronic engineering and electronics hobbyist.
  • 【Portable and Easy to Use】: It's very small and lightweight, no need soldering station, just plug and play.You can take it anywhere and you will be able to find the tools you need in the carry bag.
Check Stock

Thermaltronics TMT-FP-1 Rosin Flux Paste, 2.0 oz (57 g)

  • Ideal for electronics soldering, repair & rework.
  • Contains 2 ounces in a 3" Dia x 0.62“ H Can.
Check Stock

Soldering Iron Kit Electronics 21-in-1 60W Adjustable Temperature Soldering Iron 5pcs Soldering Iron Tips Soldering Iron Stand Desoldering Pump Magnifier Solder Wire Tweezer PU Carry Bag

  • 【21-in-1 Soldering Iron KIT】Soldering iron kit comes with soldering iron, solder wire, desoldering pump, solder wick, stand with cleaning sponge,....
  • 【HEAT UP QUICKLY and HEAT DISSPATION EFFICIENCY】60 watts, heat up quickly(2 minutes or so). Adjustable temperature with thermostat range....
  • 【DURABLE SOLDER WICK& DESOLDERING PUMP】The solder wick is 2.0mm wide, 1.5m in length, 0.4oz in weight and is easy to clean residue flux,....
  • 【PORTABLE STORAGE PU CARRY BAG】The multifunctional tool PU carry bag is rather convenient to store small tools. Which can avoid losing the....
  • 【RANGE of APPLICATION】The soldering iron sets are the best gift idea for DIY, various repaired usage of electronics and chipboards, welding,....
Check Stock

Weller WLC200 80-Watt Soldering Station with 25-Piece Flux Brushes

  • Adjustable power range from 5 watts to 80 watts provides the variable, controlled temperature needed for a range of hobbyist jobs.
  • Includes station base, SPG80 lightweight pencil soldering iron ideal for midsize work, 3/8” chisel tip, pencil iron holder, and cleaning sponge.
  • The fully removable soldering iron and replaceable heating element let you upgrade or customize your station.
  • Strong Solder Bond: Improve soldering joints with the Flux Brush. Apply Flux consistently for soldering PCBs, Stained Glass and other applications..
  • Non-shedding: Clean and easy application of a variety of materials to surfaces, including Flux, glue, oil and pastes..
  • Multiple Applications: Use for electronic PCBs, wires, stained glass, arts and crafts, or other general-purpose applications..
Check Stock

AUSTOR Pack of 6 Solder Wire 60-40 Rosin Core Solder 0.6mm Electrical Soldering Wire 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, can be accomplished quickly, and fit for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters: Tin 60% and Lead 40% is perfect for electronic assembly, flux 1.8% is good for soldering, 0.6mm diameter for good joints to prevent component overheating.
  • Easy to carry: you can take the solder wire anywhere with your pocket. And the plastic tube will protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

Electrical Solder Wire Lead Free Rosin Core Flux 2.5% Electronic Soldering Diameter 0.04in 1mm No Lead 1.76oz 50g Sn99 Ag0.3 Cu0.7 Flow RoHS

  • ROSIN CORE- easy for soldering with rosin core, the flux 2.5% better than others with 2.0% on the flowability.
  • LOW MELTING POINT- the melting temperature is about 419 Deg.F, suitable for all soldering tools.
  • ROHS COMPLIANT- Pb free, good for environmental protection.
  • WIDELY APPLICATION- the 0.04in diameter solder wire is common to solder most electronics components or wire, ideal for electrical soldering, repairing, diy.
  • QUALITY SOLDER- Made with Sn99, Ag0.3 and Cu0.7, the silver 0.3% is important for electric conductivity.
Check Stock

AUSTOR 6 Pack 60-40 Rosin Core Solder, Solder Wire Tin Lead Electrical Soldering Tools Diameter 0.8mm, 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating.
  • Easy to carry: you can take the solder wire anywhere in your pocket. And the plastic tube protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

Soldering Iron Kit, 100W LCD Digital Soldering Gun, Portable Solder Iron with Adjustable Temperature Controlled and Fast Heating Ceramic Thermostatic Design, On/Off Switch, 9pcs Soldering Kit

  • [Professional Soldering Iron Kit] -This soldering gun kit includes a pencil-type iron soldering, 5 pcs soldering tips, a stand, solder flux, solder wire. All of these are enough to meet the needs of any electronics hobbyist's daily welder work..
  • [Top Function Design] -This soldering iron is designed with adjustable temperature and thermostatic, on/off switch, LCD digital display, can accurately adjust the temperature between Celsius( 200-500℃) and Fahrenheit (392-932℉). Compared with a soldering iron station, it is easy to carry this pen-type welding tool, which is as portable as wireless soldering, everywhere..
  • [Heat Up Fast & Cool Handle] -This solder iron contains an inner-heated ceramic core with 100w, which could heat up to operating temperatures within 20 seconds. Heat-resistant screw head can insulate temperature effectively to get a long cool handle..
  • [Accuracy Temperature Control] -The high-quality heating wires built solder gun inside to control temperature and adjusts with PID (proportional-integral-derivative) technology. And the temperature sensor in it will deliver precise temperature and heat output in time..
  • [Wide Range of Applications] -This micro soldering kit solders electronic circuit boards, computers, DIY home repairs, jewe....
Check Stock

Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station..
  • It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours..
  • Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption....
  • It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..
Check Stock

2 Jar Solder Flux, Flux for Soldering, Rosin Soldering Flux Paste for Lead-Free Electronics Soldering and Soldering DIY (1.2oz/35g in a Jar)

  • ENOUGHT QUANTITY: The package includes 2 jars of soldering flux. A total of 70 g. Enough quantity for your use..
  • NON-CORROSIVE: Rosin is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
  • OXIDATION RESISTANCE: Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump..
  • STRONG APPLICABILITY: Flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
  • WHAT YOU GET: Rosin soldering flux paste * 2, our 7*24 friendly customer service for peace of mind..
Check Stock