Top Fluxless Brazing Rod

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Goss KA-725-M12P Welding and Brazing HVAC Torch Tool Kit with Stand for \MC\ Acetylene Tanks

  • ...des enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety Patented Super Swirl flame tip and combustion system are specially designed to provide powerful turbo cyclone flame, resists flame blowout and reduces brazing time by 30%. Improve capacity to burn medium to relatively large copper or other metal pipes..
  • Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame. Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
  • Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
  • Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
  • Enhanced metallicity: The addition of silver will improve t....
Check Stock

Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece

  • 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature.
  • Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators.
  • Used in joining carbon and alloy steels as well as non-ferrous materials.
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

3mm Copper Round Rod, Favordrory 20PCS Copper Round Rods Lathe Bar Stock, 3mm in Diameter 100mm in Length

  • 【Size】：5/8" OD (16mm, 4" Length(100mm).
  • 【Material】:110 Copper（The content of copper is 99.9%）.The copper rod has high purity, fine structure, extremely low oxygen content, no porosity, trachoma and looseness..
  • 【Advantage】:The electrical conductivity and thermal conductivity of copper are second only to silver, so copper rods are mainly used to make conductive and heat-conducting equipment..
  • 【Good Appearance】: The surface of the copper rod is smooth and full of metallic luster..
  • 【Wide Application】:Easy to work under hot and cold pressure.Copper rod can be used for welding and brazing.Pure copper rod is suitable for DIY hobbies,jewelry decoration and handicrafts, etc..
Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

  • Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
  • High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
  • Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock

SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18 x 1/16 - 1/2 Lb - 24 Rods

  • LFBF (Fluxcoated low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as....
  • A “must have” filler metal for every machine shop, LFBF is excellent for building up wearing surfaces or large areas where successive layers must....
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 1/16", 3/32"and 1/8". Rod Length: 18" for easier maneuverability while welding since flux coated rods cannot be bend.....
  • Available in different package weights: 1/2 Lb, 1 Lb, 2 Lb and 5 Lb - Choose rod diameter and package quantity from the menu..
Check Stock

Hot Max 24003 1/8-Inch by 36-Inch Mild Steel Brazing Rod 1#

  • General purpose copper coated mild steel brazing rod for all low carbon steels.
Check Stock

HARRIS SSBF5 Stay Silv Brazing Flux, 5 lb. Jar, Black

  • For general purpose brazing rod for repair of most ferrous and or non-ferrous metals.
  • For use with lawn equipment, sheet metal, tanks.
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

B&M 70266 SuperCooler Automatic Transmission Cooler

  • Rigid stacked-plate design is resistant to damage, and much better at cooling than ordinary 'fin and tube' coolers.
  • Constructed from black finished lightweight aluminum alloy for maximum corrosion resistance.
  • 11" x 8" x 1-1/2" racing model is rated at 20,500 BTU, and pressure tested to 200 PSI.
  • Fluxless, oven brazed construction is vibration resistant.
  • Multiple oil flow paths for maximum cooling efficiency.
Check Stock

Supplying Demand 15% Silver Solder Brazing Rods 4 Sticks 19-1/2 Inch Length for HVAC Refrigeration

  • Rod shape is flat. Solidus temp is 1190 and the Liquidus temp is 1475.
Check Stock