Top Flying Skateboard

Skateboard Backpacks Foldable Skateboard Bags for Men and Boys Red

  • 【Portable】 The skateboard bag is foldable and can be used as a normal backpack. Its design is light and compact, and it is easy to use and easy to carry..
  • 【Practical】 The skateboard backpack has 2 zippered pockets. The pockets can hold some skateboard accessories or common items, which is very practical. The strap of the skateboard bag can be adjusted to suit people of different heights..
  • 【Firmly】 The skateboard bag has 3 nylon buckles for fixing the skateboard. The nylon buckle is relatively wide and the buckle is very tightly bonded. Even heavier skateboards can be fixed on the skateboard bag..
  • 【Durable】 The skateboard bag is made of high-density nylon cloth and equipped with high-quality zippers. It is made of fine workmanship, waterproof, and very durable..
  • 【Compatibility】 Normally, the skateboard bag is compatible with all standard skateboards and some electric skateboards, and is not compatible with cruiser skateboards and longboards.Note：The skateboard bag is suitable for skateboards whose size meets the following two conditions at the same time:①The deck width of the skateboard is less than or equal to 9 inches.
  • ②The deck length of the skateboard is greater than 30 inches and less than 40 inches..
Check Stock

Skateboard Backpacks Foldable Skateboard Bags for Men and Boys Black

  • 【Portable】 The skateboard bag is foldable and can be used as a normal backpack. Its design is light and compact, and it is easy to use and easy to carry..
  • 【Practical】 The skateboard backpack has 2 zippered pockets. The pockets can hold some skateboard accessories or common items, which is very practical. The strap of the skateboard bag can be adjusted to suit people of different heights..
  • 【Firmly】 The skateboard bag has 3 nylon buckles for fixing the skateboard. The nylon buckle is relatively wide and the buckle is very tightly bonded. Even heavier skateboards can be fixed on the skateboard bag..
  • 【Durable】 The skateboard bag is made of high-density nylon cloth and equipped with high-quality zippers. It is made of fine workmanship, waterproof, and very durable..
  • 【Compatibility】 Normally, the skateboard bag is compatible with all standard skateboards and some electric skateboards, and is not compatible with cruiser skateboards and longboards.Note：The skateboard bag is suitable for skateboards whose size meets the following two conditions at the same time:①The deck width of the skateboard is less than or equal to 9 inches.
  • ②The deck length of the skateboard is greater than 30 inches and less than 40 inches..
Check Stock

FREEDARE Skateboard Trucks 5.25 and Wheels Set 54mm Skateboard Wheels and Bearings Set Skateboard Trucks 5.25 Skateboard Riser Pads Skateboard Hardware Set

  • SKATEBOARD PARTS SET: It inclouds skateboard trucks 5.0, skateboard wheels 52mm, skateboard bearings ABEC-9, skateboard screws 1", skateboard riser....
  • 7.5-inch Skateboard truck, aluminum alloy casting, die-casting process, medium carbon steel hardening, metal baking finish, can withstand more weight....
  • 95a hardness 60% rebound is suitable for beginners, hardness is too high, easy to slip, PU infusion integrated molding, do not worry about wheel....
  • 608 STANDARD ABEC-9 SKATEBOARD BEARINGS, The excellent bearing can continuously rotate 30S without load.Bringing you smoother than ever..
  • SUITABLE FOR 7.5-8" SKATEBOARD DECK, The Losenka skateboard set fits all 7.5” to 8" skateboard decks..
Check Stock

BESPEED Skateboard Trucks 5.25\ Raw Set of 2 Fits 8.0\-8.5\ Decks Pair Aluminum Alloy Polished Hollow Light Weight Standard (Black-Blue, 5.25\)

  • 【Exquisite workmanship】This skateboard hardware adopts aluminum alloy casting and die-casting process, medium carbon steel hardening treatment, and metal baking paint, which enables the scooter to withstand greater weight and pressure..
  • 【Suitable for Beginners】This skateboard trucks and wheels set has a hardness of 95a and a rebound rate of 60%, which is very suitable for beginners. The hardness is too high and it is easy to slip, so don't worry about the wheel cracking..
  • 【Superior Performance】This skateboard trucks adopts 608 standard ABEC-9 skateboard bearing, the excellent bearing can rotate continuously for 30 seconds without load, giving you an unprecedented smooth feeling..
  • 【Applicable Models】This skateboard trucks fits 7.5-8" skateboard decks, and the skateboard set fits all 7.5 to 8" skateboard decks..
  • 【Skateboard Parts Set】 Set includes Scooter 5.0, Skateboard Wheel 52mm, Skateboard Bearing ABEC-9, Skateboard Screw 1.
Check Stock

VJ Skateboard Truck and Wheel 5.0 Skateboard Trucks Silver w/Skateboard Crusier Wheel 60mm Skateboard Bearings Skateboard Screws Skateboard Riser Pads Black

  • SKATEBOARD PARTS SET: It includes skateboard trucks 5.0 (127mm), skateboard wheels 60mm, skateboard bearings Abec 7, skateboard screws 1.25",....
  • MID-SIZED SKATEBOARD TRUCKS, This is 5inch hanger 7.6inch Axle aluminum trucks w/ 90a hardness bushions and 6-hole baseplates, which will fit both the....
  • SKATEBOARD CRUISER OLD SCHOOL WHEEL, Our skateboard wheel 60mm is soft-mid hardness, for riders skating longboards, old-school boards, downhill, and....
  • 608 STANDARD ABEC 7 SKATEBORD BEARINGS, This skateboard bearings is most common 608 industry standard and match up with nearly every skate wheel. The....
  • SUITABLE FOR CRUISER AND OLD SCHOOL DECK, This skateboard truck and wheel set fits all 7.8” to 10" width skateboard cruiser and old school decks. We....
Check Stock

BiJun Skateboard Wall Mount, Longboard Hanger Skateboard Display Rack for Fits Skateboard Longboard Skis Nowboards Water Skis and Electric Skateboard

  • ★Skateboard Rack Works for Fits all Size Assembled Skateboard, Longboard, Skis, Snowboards, Water Skis, and Electric Skateboard..
  • ★Lined with felt where the Skateboard rack provides a good look and a good resting pad for your Skateboard soft pad would protect your precious Skateboard from scratching..
  • ★Skateboard wall mount made of Wood ,Perfectly show your skateboard, perfect way to keep things clean,organized ,easy installation..
  • ★Hang your skateboard anywhere along your wall and display it as a work of art! Great for home and office garage,child's bedroom skateboard storage and display..
Check Stock

#NA 1 inch Skateboard Hardware Bolts Bag Packing (Green)

  • The package includes: you will get 16 skateboard truck nuts and 16 axle washers, enough to assemble 4 skateboards to meet your long-term needs.
  • Perform well: the skateboard truck hardware keeps wheels and skateboard trucks tight, axle washers can reduce friction between the bearing and axle nut and hangar, thereby extending the life of the skateboard.
  • Standard size: the skateboard truck axle washers set is suitable for every truck with standard 8 mm axle size, suitable for most skateboards and longboards.
  • Quality materials: skateboard truck nuts and skateboard axle washers are made of quality metal, tough and wear-resistant, well-made, skateboard truck nuts have non-slip rubber rings to avoid falling offPlastic box included: these hardware skateboard truck nuts and axle washers are placed in a transparent plastic box, lightweight and compact in size, easy to carry and store.
  • Plastic box included: these hardware skateboard truck nuts and axle washers are placed in a transparent plastic box, lightweight and compact in size, easy to carry and store.
Check Stock

inktells Hip Hop Skateboard Backpacks Bag for Men and Boys with 2 Adjustable Shoulder Straps,Water Proof Skateboard Backpack for Penny Board, Electric Skateboard, Skate Carry Bags for Travel

  • [Universal]It is a universal backpack bag,it’s size is 85*30cm (33.5*11.8inches).It is a suitabale for skateboard,electric skateboard and skateboard deck or even other items with length003c80 cm, width003c20 cm and height003c9 cm..
  • [Multifunction]The skateboard backpack bag has 3 storage space,one is skateboard carry bag,one is hats and shoes storage bag,another is small item carrier..
  • [Comfortable] This skateboard backpack, with wide adjustable straps, distributes the weight of the skateboard reasonably, making it more comfortable to carry.At the bottom edge of the skateboard bag, there's a protective cover that protects the board as well as your back and hips..
  • [Water proof]This skateboard backpack bag, made of encrypted 420D Oxford fabric, is waterproof, tough, and lightweight..
  • [Street Trend] The skateboard backpack has hip-hop street style graffiti patterns, making the skateboard bag more fashionable.The main black color makes the skateboard bag suitable for all kinds of ..
Check Stock

Jizmo Skateboard Trucks, High Rebound Skateboard Wheels 60mm, Skateboard Bearings ABEC-11, Skateboard Tool, Skateboard Pads, Skateboard Hardware Combo Starter Set（Black…

  • Skateboard Parts Set for Beginners. This starter set includes 2 skateboard trucks, 4 skateboard wheels 52mm, High precision ABEC-11 Skateboard bearings, Practical T-tool, 2 riser pads 2mm, and standard skateboard hardware. Build a entry-level skateboard with this set..
  • Durable Standard 139mm Skateboard Trucks. Made of Aluminum, durable trucks for cruising or tricks. 5inch hanger, 7.75 inch axle, with 90A bushing and 6 base plate holes, fits well in standard 7.5-8.0" double kick concave decks..
  • High Precision ABEC-11 Bearings. These skateboard bearings keep rolling smooth and fast. Good alternative to expensive bearings..
  • High-rebound Skateboard Wheels 60mm. 83A high rebound wheels, smoothier riding experience, suitable for cruising, street skateboarding..
  • Universal Skateboard Tool. The T tool can be used to adjust kingpin, wheels, base plate bolts and trucks. A must have tool for skaters..
Check Stock

28 Skateboard Theme Birthday Party Supplies Decorations Include Skateboard Theme Birthday Banner Skateboard Theme Cake Toppers Latex Balloons Hanging Swirls Paper Pom Poms for Skater Birthday Party Decor

  • What you will get: the package comes with 44 pieces of skateboard themed party decorations, including 1 piece of skateboard themed birthday banner, 1 skateboard themed big cake topper, 6 skateboard themed small cake toppers, 4 white latex balloons, 4 red latex balloons, 4 black latex balloons, 8 pieces of hanging swirls in 8 skateboard themed style, 6 paper pom poms in red and black, and 10 tassel garland in red and black, enough for you to prepare an impressive birthday party.
  • Skateboard themed design: the birthday party decorations feature many classic and interesting elements like skateboards, designed with black and red colors, which make them full of festive vibes.
  • These skateboard themed party decorations are ideal decorations for skateboard themed parties, sports themed parties, and other themed events.
  • Widely applicable: these skateboard party supplies are suitable for skateboarding, hip-hop, sports themed parties.
  • You can hang complete banners on walls, doors, balconies, yards, fences and ceilings, etc., adding a nice touch to your birthday party.
  • Quality material: these Skateboard theme birthday party decorations are durable and reusable, serving multiple times.
  • The birthday banner is assembled and strung in advance, thus, you can decorate you....
Check Stock

Jizmo Skateboard Trucks Fits 7.75-8.25 Deck Skateboard Wheels 52mm Skateboard Bearings ABEC-11 Skateboard Tool Skateboard Pads Skateboard Hardware Combo Starter Set

  • Skateboard Trucks and wheels Set for 7.75-8.25" decks. This starter set includes 2 skateboard trucks 139mm standard, 4 skateboard wheels 52mm, High precision ABEC-11 Skateboard bearings, Practical T-tool, 2 riser pads 2mm, and standard skateboard hardware. Build a entry-level skateboard with this set..
  • Durable Standard Skateboard Trucks. Made of Aluminum, durable trucks for cruising or tricks. 5inch hanger, 7.6 inch axle, with 90A hard bushing and 6 base plate holes, fits well in standard double kick concave decks..
  • High Precision ABEC-11 Bearings. These skateboard bearings keep rolling smooth and fast. Good alternative to expensive bearings..
  • All-purpose Skateboard Wheels 52mm. 99A high rebound wheels, suitable for skills or cruising around the street..
  • Universal Skateboard Tool. The T tool can be used to adjust kingpin, wheels, base plate bolts and trucks. A must have tool for skaters..
Check Stock

BiJun Skateboard Wall Mount, Longboard Invisible Clear Hanger Shelf, Display Rack, for Fits Skateboard, Longboard, Skis, Snowboards, Water Skis and Electric Skateboard (1 Pack)

  • ★Skateboard rack works for Fits all size assembled skateboard, longboard, skis, snowboards, cruiser boards, penny boards , skateboards, longboards, etc..
  • ★Skateboard wall mount made of high quality transparent acrylic , with high transparency, perfectly show your skateboard..
  • ★This transparent skateboard display rack will help you display and organize all your skateboards. hang your skateboard anywhere along your wall and display it as a work of art! great for home and office skateboard storage and display..
  • ★Front dimensions: 11 3/8"w x 4"h ,overall dimensions: 11 7/16"w x 4"h. will not bend or lose shape. easy installation, harewares are included..
  • ★There is a layer of milky white protective film on the outside and the inner lining of the skateboard rack to protect the skateboard rack and prevent acrylic from being scratched. Please tear off the protective film before use.Just tearing off one side will look white and muddy, not perfect to show your skateboard..
Check Stock