Top Flysky Fs Gt2s
DJI RC Pro Smart Controller for Air 2S and Mavic 3 Drone
- Please note: Flysky FS-i6x is default 6CH with fs-ia6b receiver. If you have 10 channels receiver fs-ia10b, that you can open to 10 channels..
- Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support.
- Multi-channel Hopping Frequency --- This system bandwidth ranges from 2.408GHz to 2.475GHz. This is divided in 135 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean version) in order to reduce interference from other transmitters..
- Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection.
- Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life..
Check StockFlysky RC FS-iA6B Receiver 2.4G 6 Channel i-Bus PPM Receiver Compatible with Flysky FS-i6X / FS-i4 / FS-i6 / FS-i10 Radio Transmitter Remote Controller
- Reliable, interference free 2.4GHz AFHDS2A signal operation,Data port: PWM / PPM / i.bus / s.bus.
- Ultra light weight design Flysky FS-iA6B is a 6 channel receiver designed for Airplane / Glider / Helicopter. for most RC cars, trucks and airplane.
- 6 channels receiver compatible Flysky i4 i6 i10 transmitter.
- Quick and extremely stable in performance,worth your choice.
Check StockFlysky Receiver FS-GR3E AFHDS Long Range 3CH 2.4GHz Receiver for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-IT4S Transmitter RC Car Boat (1 Pc)
- Reliable, interference free 2.4GHz AFHDS signal operation.Quick and extremely stable in performance.
- This 3CH receiver is very easy to bind very fast link-up, strong signal distance.
- Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-IT4S Transmitter.
- Quick and extremely stable in performance for RC cars, Truck, buggy, RC Boat.
- Note: The factory communication protocol of GR3E receiver is AFHDS . Only when the transmitter communication protocol is AFHDS, it can link to the frequency. If the transmitter communication protocol is AFHDS 2A, you need to adjust the transmitter communication protocol to AFHDS according to the instructions in the manual. Only then can it be paired.Input voltage: 4.0-6.5V DC, this receiver is only suitable for part of the Flysky series Transmitter.
Check StockGlobact Flysky FS-GR3E AFHDS Long Range 2.4G 3CH Receiver for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S Transmitter RC Car Boat (2 Pcs)
- Reliable, interference free 2.4GHz AFHDS signal operation.Quick and extremely stable in performance.
- This 3CH receiver is very easy to bind very fast link-up, strong signal distance.
- Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S Transmitter.
- Quick and extremely stable in performance for RC cars, Truck, buggy, RC Boat.
- Note:The factory communication protocol of GR3E receiver is AFHDS . Only when the transmitter communication protocol is AFHDS, it can link to the frequency. If the transmitter communication protocol is AFHDS 2A, you need to adjust the transmitter communication protocol to AFHDS according to the instructions in the manual. Only then can it be paired. Input voltage: 4.0-6.5V DC, this receiver is only suitable for part of the Flysky series Transmitter.
Check StockFLYSKY FS-i6X 10CH 2.4GHz RC Transmitter Controller with iA6B Receiver Upgrade Cable for RC Boat Racing Drone
- Please note: Flysky FS-i6x is default 6CH with fs-ia6b receiver. If you have 10 channels receiver fs-ia10b, that you can open to 10 channels..
- Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support.
- Multi-channel Hopping Frequency --- This system bandwidth ranges from 2.408GHz to 2.475GHz. This is divided in 135 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean version) in order to reduce interference from other transmitters..
- Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection.
- Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life..
Check StockHOBBYMATE Flysky FS GT5 RC Transmitter with FS BS6 Gyro Receiver, 2.4Ghz 6 Channels RC Car Radio Transmitter and Receiver [F.Safe Out of Control Protect, ABS Setting, AFHDS 2A]
- Flysky Rc FS-GT5 is a 6 channel rc transmitter (and receiver) uses 2.4gHz reliable AFDHS2a protocol. Beyond throttle and steering the 4 extra channels will allow user to run practically any auxiliary item with mixers also available for crawler steering and the like. Full gyro control via remote and a very easy to navigate GUI. NTN semi-pemeable, segment screen, VA52.5 * 34mm LCD Screen white HD and noble display. fit most RC car/ boat/ trucks.
- Flysky GT5 F.SAFE Out of Control Protection ----- Through set out of control output value, you can set Multiple Channels Out of Control Protection, make the remote controller mode smooth and steady stop when accidentally disconnected.
- ABS function (automatic brake): This function only adjusts the throttle channel, including six kinds of parameter settings, automatic brake settings to adapt to different models of track, to achieve the best braking effect and cornering control effect..
- Rc Crawler Truck CRAWL function (climbing car mode), SVC function (smart car control mode), gyro stability function.4 Climbing Mode ----- With 4 Climbing Mode, revolutionary control optimization for climbing cars, easier handling, more freedom to distribute functions.
- Flysky GT5 remote controller can store 20 models, each model can set....
Check StockHappymodel Mobula6 1S 65mm Brushless Whoop Drone Mobula 6 BNF AIO 4IN1 Crazybee F4 Lite Flight Controller Built-in 5.8G VTX (Frsky RX,19000KV)
- Flight controller: CRAZYBEE F4 Lite Firmware target: Frsky SPI RX version is CrazybeeF4FR.
- Flysky version is Crazybee F4FS. Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready. Built-in Betaflight OSD(SPI Control). Built-in 5.8G VTX. Built-in SPI Frsky/Flysky receiver. Built-in 5V 1A BEC. Built-in voltage detection..
- Onboard 4in1 ESC: MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600.
- Runcam Nano3: Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable Day/Night: Color.
- Onboard 5.8g 40-CH 25mw VTX: Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels Smartaudio ready.
Check StockFlysky FS-T6 6CH 2.4G LCD Transmitter with R6B Receiver for RC Helicopter Quadcopter Glider Airplane (Right Throttle(Mode 1)
- Note : There are 2 models for chose: model 1 is Right throttle.
Check StockFlysky FS-NB4 2.4G 4CH Noble Radio Transmitter HVGA 3.5 inch TFT Color Touch Screen with Receiver FGR4 FGR4S Bidirectional 4-Way PPM/IBUS for RC Car/Boat
- Build-in new FS-HF200 high frequency module, Support Online update with standard USB cable , more stable performance.
- HVGA 3.5-inch TFT color screen, resolution 320 * 480, LCD white back light, capacities touch screen, superior look and feel.
- The failsafe function is used to protect the model and user in case of signal loss..
- Transmitter with 3.7V 4300mAh battery (built-in).
- Flysky FGR4S Receiver FCC ID: N4ZFGRS4OO.
- Type of antenna: built-in ( Note: the only receiver version have no Transmitter, Transmitter Version only come with -P receiver ).
Check StockGoolRC Flysky FGr4S V2 Receiver, 2.4GHz 4CH AFHDS 3 Remote Control Receiver Built-in Single Antenna PWM/PPM/I-Bus Output Compatible with Flysky Noble FS-NB4 PL18 RC Transmitter for RC Car Boat
- 2.4GHz 4 channel receiver is compatible with FlySky Noble FS-NB4 PL18 Transmitter, good for Rc Car and Rc Boat..
- FGr4S adopts AFHDS 3, Flysky's third-generation automatic frequency hopping digital system. Easy to bind and very fast link-up, quick and extremely stable in performance..
- It uses an internal single antenna with two-way transmission capabilities and is designed to be compact and easy to install..
- The receiver supports PPM/i-bus/PWM data output, suitable for AFHDS3 system remote controller..
- Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing..
Check StockBruni Screen Protector Compatible with Flysky FS-T6 Protector Film, Crystal Clear Protective Film (2X)
- Accurately, specifically developed and compatible with FlySky FS-T6.
- Made of scratch-resistant, highly transparent PET material and laser-cut on state-of-the-art machines.
- This transparent Screen Protector can be applied easily and without bubbles, and can be removed or repositioned at any time.
- No slipping - once attached, the glue-free Protective Film no longer moves - optimal edge adhesion guaranteed.
- Optimized for use on touch displays - unadulterated display of the screen contents and no impairment of the usability with the Protector Film *** Made in Germany.
Check Stock7.4v 1000mah 2S RC Lipo Battery Fits for Flysky FS-GT5 2.4G 6CH Transmitter RC Remote Controllor
- Battery Size:47 x 30 x 14mm, Battery Weight:55 gram.
- Volt:7.4V(2S), Capacity :1000Mah ,8C Discharge,With JST Plug.
- Fits for Flysky FS-GT5 2.4G 6CH Transmitter.
- DO NOT CHARGE THE BATTERY IN THE Transmitter.
- Customer Service: If Any technical support needed or question about our products.Please feel free to contact us, we will reply in 24 Hours.
Check Stock