Top Folding Aluminum Ramp Kit

Black Widow AMC-400-F-Folding Aluminum Hitch Carrier for Dirt Bikes

  • Durable, hitch-mounted folding motorcycle carrier for use with dirt bikes and motorcycles.
  • comes with self-storing ramp that can be attached to carrier during transport.
  • 27" clearance from folding adapter hitch pin to carrier.
  • Works with 2" Class III or IV hitch receivers.
  • carrier can be folded up when not in use.
  • Ramp installs either side for bilateral roll-on, roll-off action.
  • includes heavy duty folding hitch adapter, a youth dirt bike adapter, anti-rattle device and anti-tilt bracket.
  • High-strength, lightweight aluminum construction.
Check Stock

Ruedamann 3'L x 28.3\ W,Holds up to 600 lbs,Wheelchair Ramp with Non-Slip Surface,Portable Aluminum Wheelchair Ramp,Folding Ramps for Wheelchairs,Home,Steps,Stairs,Handicaps,Doorways

  • ...a little. There are bolts with this ramp. You can fix the ramp with bolts through the holes on the extension plate of the ramp to the ground to avoid moving..
  • 【Lightweight & Portable】Lightweight portable folding wheelchair ramp that make sure wheelchairs access over any stairs,steps,curbs,handicaps,doorways,etc. Aluminum alloy has high hardness, toughness and resilience, please use it with confidence. This wheelchair ramp is available for manual wheelchairs, trolleys, rollators and two wheeled vehicles (not good for motorcycles)..
  • 【Sturdy Hinge】The hinge of the wheelchair ramp are more durable than ordinary hinges.Folding threshold ramp design for easy storage and transport.Please do not walk or pass through vehicles on the hinge in the middle of the ramp..
  • 【Anti-skid & Durable】The ramp surface is covered with non-slip emery film, and non-slip rubber pads placed at the top of the wheelchair ramp for safety use and prevent slip from the using occasions.Welding of each part of the ramp makes the ramp with no noise and more durable than usual ramps. Compared with other iron rivets, our products use stainless steel rivets, which are more durable and not easy to rust..
  • 【Versatile Use】Wheelchair ramps for home with webbing handle for indoor or ....
Check Stock

Ruedamann 7.5'L × 11" W Folding Loading Ramp, 750 lbs Capacity, Aluminum Portable ATV UTV Ramp/Motorcycle Ramp/Truck Ramp for Dirt Bikes,Carts,Trucks,Lawn Mowers,Snow Blowers Pickup,1 PC

  • ...ss times without malfunctions. Our hinge is 1" (2.5cm) longer than general commercial products, makes it safer and more load-bearing..
  • 【High Quality & Large Weight Capacity】The folding loading ramp is manufactured from lightweight, strong and durable rustproof aluminum with about 16.7 lbs (7.6kg). Aluminum alloy has high hardness, toughness and resilience, please feel free to use it. High quality hinges are durable and provide excellent load-bearing, can holds up to 750 lbs (340kg). Recommended using height is below 25.6" (65cm). Suitable for vehicles with tires section width less than 10" (250mm)..
  • 【Unique Design】The extended head plate fits the place of use, which is more secure. Non-slip rubber pad placed on the back at the top of the motorcycle ramp for safety use, prevent slip from the using occasions and eliminate the noise in use. Punching surface of the ramps will not accumulate water and add traction in all weather conditions. Tail sloping design allows the ramp to touch the ground with a larger area, and easier to go up the ramp. No need to assemble and simple to set up..
Check Stock

BISupply Aluminum Ramp Kit – 8in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit

  • BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 8-inch (5.1 by 20.3 cm) boards into sturdy, all-purpose utility trailer ramps.
  • Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps.
  • 2-inch by 8-inch ramp boards required (not included).
  • Kit weighs just under 6 pounds for easy storage, installation, and handling.
  • DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability.
  • Loading ramp brackets provide reliable stability and resistance to rust and corrosion.
  • Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5 by 7.25-inch (12.7 by 18.4 cm) faceplate, and pre-screwed bolt holes.
  • ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 7.5-inch (10.2 by 19.1 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything.
  • Anti-slip rubber feet help to hold your ramp in place while loading up your toys.
  • MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. (....
Check Stock

BISupply Aluminum Ramp Kit – 12in Truck Ramp Brackets and Rubber Feet, Tailgate Ramp Kit Ramp Plate Kit

  • BUILD YOUR OWN RAMPS: Use the BISupply Aluminum Truck Ramps Loading Ramp Kit to turn simple 2 by 12-inch (5.1 by 30.5 cm) boards into sturdy, all-purpose utility trailer ramps.
  • Each package of ramp parts includes 2 aluminum loading ramps, 2 rubber anti-slip loading ramp ends, and installation hardware to assist in constructing a total of (2) ramps.
  • 2-inch by 12-inch ramp boards required (not included).
  • Kit weighs just under 9 pounds for easy storage, installation, and handling.
  • DURABLE ALUMINUM RAMP PLATES: Constructed of quality aluminum material ensures that these load ramps are designed for maximum strength and durability.
  • Loading ramp brackets provide reliable stability and resistance to rust and corrosion.
  • Features a 1.37-inch (3.5 cm) board insert space, non-skid threads on the 5.4 by 11-inch (13.7 by 27.9 cm) faceplate, and pre-screwed bolt holes.
  • ANTI-SLIP FEET: Forget about cutting angles to make your ramps sit flat, simply slide one of these 4 by 11-inch (10.2 by 27.9 cm) rubber ramp ends for boards on the end of the board and you are ready to load up anything.
  • Anti-slip rubber feet help to hold your ramp in place while loading up your toys.
  • MAXIMUM CAPACITY MEETS YOUR NEEDS: Each set of truck ramp kits has a maximum load capacity of 700 lbs. ....
Check Stock

ORFORD Non-Skid Wheelchair Ramp 3FT Threshold Ramp with a Non-Slip Surface Portable Aluminum Foldable Mobility Scooter Ramp for Home Steps Stairs Doorways Curbs

  • [Sturdy & Non-slip] Lightweight wheelchair ramp with non-slip paint finish on the ribbed and high traction surface, the ramp is suitable for use in....
  • [Folding & Handle] ORFORD 3FT folding wheelchair ramps are easy to fold, the convenient PVC handles, which are light and easy to transport. Folded....
  • [Safety] Durable and rust-proof aluminum construction, with a capacity of 800 lbs. The wheelchair ramp adopts stainless steel hinge, and the surface....
  • [Easy to Use] This convenient portable wheelchair ramp is easy to install. With the ramp, you will find it super effortless to push your mobility....
  • [Quality Product with Warranty] Our portable Wheelchair Ramp comes with a 1-year warranty (damage caused by non-human factors)..
Check Stock

Ruedamann 2'L x 26.6' W,Holds up to 600 lbs,Wheelchair Ramp with Non-Slip Surface,Portable Aluminum Wheelchair Ramp,Folding Ramps for Wheelchairs,Home,Steps,Stairs,Handicaps,Doorways

  • ...the other side will be lifted up a little because only one side holds the weight. In this case, please ensure that the weight does not exceed 300 lbs(150kg)..
  • 【Lightweight & Portable】Lightweight portable folding wheelchair ramp that make sure wheelchairs access over any stairs,steps,curbs,handicaps,doorways,etc. Aluminum material is relatively soft, the ramp may bend slightly when supporting heavy weight, but its resilience is high and will not affect the use, please rest assured. This wheelchair ramp is available for manual wheelchairs, trolleys, rollators and two wheeled vehicles. NOTE: not suitable for power wheelchairs wider than 26.6" (68cm)..
  • 【Sturdy Hinge】The hinge of the wheelchair ramp are more durable than ordinary hinges.Folding threshold ramp design for easy storage and transport.Please do not walk or pass through vehicles on the hinge in the middle of the ramp..
  • 【Anti-skid & Durable】The ramp surface is covered with non-slip emery film, and non-slip rubber pads placed at the top of the wheelchair ramp for safety use and prevent slip from the using occasions.Welding of each part of the ramp makes the ramp with no noise and more durable than usual ramps. Compared with other iron rivets, our products use stainless steel rivets, whic....
Check Stock

Wheelchair Ramps 10FT, gardhom Extra Wide 31.3” Aluminum Mobility Scooter Ramps Folding Threshold Ramp for Home Steps Doorway Stair

  • ❤️Wheelchair Threshold Ramp: (Unfolded Size: 10FT 120*31.3*2”.
  • Folded Size: 10FT 60*15.6*6.3”). Fast set up, just open it and ready to use. No installation required. Durable aluminum wheelchair ramp supports up to 600 Lbs capacity..
  • ❤️Portable Wheelchair Ramp With Handle for Easy Transporting: Has a handle for easy carrying. Carries like a suitcase. And you can take with them when visiting family..
  • ❤️Adjustable Wheelchair Ramps for Home: Anti-slip skid resistant tape for maximum traction even in bad weather.
  • unique bottom grip for preventing the ramp from slipping.
  • safety pins for locking and landing attachment..
  • ❤️Wheelchair Folding Ramp: A life-saver for your family. Folding wheelchair ramps are ideal for steps, walkers,doorway ramps,home,stair,threshold. Father's Day is coming and this would be a great Father's Day gift for your old father..
Check Stock

Titan Ramps 5 FT Single-Fold Aluminum Briefcase Ramp, Rated 600 LB Capacity, Nylon Handle, Wheelchair and Scooter Carrying Loading Ramp

  • ...o struggle to load your wheelchair or electric scooter into the van. Instead, use this convenient loading ramp to help you stow away your mobility devices. It can also attach to porches, curbs, landings, and steps for handicap accessibility..
  • FOLDING BRIEFCASE DESIGN: This aluminum ramp folds in half and includes a soft nylon handle to carry it like a briefcase. Because of this ramp's convenient design, you won't have to struggle with an awkward load as you move it from your vehicle to your house..
  • ANGLED LIP: This ramp features an angled lip of 2.5", making it easy to roll onto with your wheelchair. It also has a serrated top that further prevents slipping. At the top are holes to secure and bolt the ramp into place..
  • DURABLE MATERIAL: This utility ramp is made from solid aluminum. Aluminum is a sturdy, rust-resistant metal that can withstand the elements easily, so you'll get plenty of years of use..
  • DIMENSIONS: Weighing 30 LB, this ramp measures 60" L x 30" W when fully extended. When folded, it measures 48" x 15" x 3". This ramp can ....
Check Stock

TRIBLE SIX 2Pcs 7.5' Folding Loading Ramp Motorcycle ATV Lawnmower Truck Trailer Ramps (All aluminum and welded,1500lb Capacity)

  • 【Application】7.5' perforated Non-Plate folded aluminum ramp. Fit for: ATV & UTV, Lawn Mower , Truck , Motorcycle , Trailers , Dirt Bike and Garden Tractor.
  • 【Feature】 Capacity：max load up to 1500 lb----Dimensions : 91"x11.5" (each), Folded Dimensions: 45.5"x11.5"x6" (each).
  • 【Include】 2 pcs Aluminum Folding Ramp, Tie Down Straps Included.
  • 【Safety】 High quality, constructed of durable 6061 Aluminum.Comes with rubber tipped fingers and safety straps and its built-in traction surface prevents slippage..
  • 【kindly note】The Aluminum ramp have some elasticity,there will be a litte curved when you use it..
Check Stock

ORFORD Non Skid Wheelchair Ramp 4FT Threshold Ramp with an Applied Slip-Resistant Surface Portable Aluminum Foldable Mobility Scooter Ramp for Home Steps Stairs Doorways Curbs

  • [Sturdy & Non-slip] Lightweight wheelchair ramp with non-slip paint finish on the ribbed and high traction surface, the ramp is suitable for use in all weather conditions. Wide platform design for maximum support and stability. And the top transition plate adopts a rubber anti-skid pad, ensures the safe use of the ramp..
  • [Folding & Handle] ORFORD 4FT folding wheelchair ramps are easy to fold, can be carried like a suitcase with a handle. Folded Size: 47.6"L x 14.2" W x 2.7"H.
  • Unfolded: 47.6"L x 28.7"W x 2.0"H. Ramp Weight: 20 lbs..
  • [Safety] Durable and rust-proof aluminum construction, with the capacity of 600 lbs. The wheelchair ramp adopts stainless steel hinge, and the surface is flat, therefore, it can minimize the possibility of tripping over..
  • [Easy to Use] This convenient portable wheelchair ramp is easy to install. With the ramp, you will find it super effortless to push your mobility devices, such as wheelchairs and scooters, onto curbs, low stairs or garage..
  • [Quality Product with Warranty] Our portable Wheelchair Ramp comes with a 1-year warranty (damage caused by non-human factors)..
Check Stock

Wheelchair Ramps 8FT, gardhom Extra Wide 31.3” Folding Portable Aluminum Threshold Ramp for Stair Doorways Doorways Steps

  • ❤️Wheelchair Threshold Ramp: (Unfolded Size: 8FT 96*31.3*2”.
  • Folded Size: 8FT 48*15.6*6.3”) Fast set up, just open it and ready to use. Durable Aluminum Construction Supports Up to 600 Lbs Capacity..
  • ❤️Portable Wheelchair Ramp With Handle for Easy Transporting: Has a handle for easy carrying. Carries like a suitcase. And you can take with them when visiting family..
  • ❤️Adjustable Wheelchair Ramps for Home: Anti-slip skid resistant tape for maximum traction even in bad weather.
  • unique bottom grip for preventing the ramp from slipping.
  • safety pins for locking and landing attachment..
  • ❤️Wheelchair Folding Ramp: A life-saver for your family. Folding wheelchair ramps are ideal for steps, walkers,doorway ramps,home,stair,threshold. Father's Day is coming and this would be a great Father's Day gift for your old father..
Check Stock