Top For Insulating Glass

Luxtea Crystal Teapot Heating Base Glass Teapot Warmer In Heart Shape Heat Resistant for Heating Tea or Beverages

  • This teapot base is made of purely handcrafted blowing borosilicate glass, being durable and easy to clean, best to work with teapot.
  • Made of insulating crystal glass and designed with the fashionable and beautiful heart shape.
  • You can use it to heat tea or other beverages by putting one alight smokeless candle in the middle of it.
  • It is an enjoyable moment when using it with your friends and families.
  • It makes a perfect companion piece to any of the non-footed glass teapots. It is safe and sturdy, so please don’t afraid the candle flame will spill out.
Check Stock

Primula Travel Bottle Cold Brew Coffee Maker with Filter and Insulating Sleeve, 20 oz, Clear

  • Thermal shock resistant borosilicate glass bottle.
  • Removable, super fine, stainless steel filter.
  • Primula Iced coffee on the go! Enjoy the most flavorful iced coffee on the go. Cold brewed coffee is on average 65% less acidic and sweeter than conventional hot brewed coffee. Includes a protective insulating Neoprene sleeve with carrying strap..
Check Stock

GREAT STUFF Multipurpose Black Gap Filler | Insulating Foam Sealant, 12 oz. – Black (12 Pack)

  • MULTIPURPOSE BLACK FOAM. Specifically formulated to naturally blend in both indoor and outdoor environments, Multipurpose Black is a ready-to-use insulating gap filler that expands up to 1" inch, creating a long-lasting, airtight and water-resistant seal..
  • STRAW-APPLIED. Save time on your projects with this simple to use spray foam — the straw applicator makes any project a breeze and helps you deliver the right amount of insulating foam even in hard to reach spaces..
  • SPRAY ANYWHERe. Tackle a variety of projects with exceptional adhesion, both inside and out. Seal gaps in masonry, gas lines, landscaping, plumbing penetrations, vehicles, boats and much more. Adheres to wood, metal, masonry, glass and most plastics..
  • QUICK-CURE. Stop waiting around and keep the pace of your projects on target. This foam sealant dries tack-free in 20 minutes and cures rigid for trimming in 1 hour. Trim, sand, stain and paint for a truly GREAT finish to your projects..
  • FILL MORE GAPS. Get the job done right the first time with this cost-effective bulk case of polyurethane foam crack filler from GREAT STUFF. Includes a 12-count of 20 oz. cans, each with dispensing straws to cover all your gaps and cracks..
Check Stock

Black+Blum Leakproof Meal Prep Lunch Box Food Container, Slate, 600 ml/ 20 fl oz

  • LEAKPROOF GLASS LUNCH BOX A modern food container for a modern lifestyle Perfect for breakfast lunch and everything in-between The stainless-steel screw tight lid ensures a completely leakproof seal Truly a no-fuss no mess on-the-go lunch box.
  • PROTECTIVE + INSULATING CASE The glass lunch pot is encased within a protective wood-fiber base container to keep your food insulated and protected The silicone lid is complete with a steam vent which means food can be easily reheated in the microwave.
  • SPLATTER PROOF SILICONE LID Ideal for meal prep the lightweight inner glass bowl comes with a silicone lid that prevents spills and splattering when microwaving your food.
  • MICROWAVE FREEZER + DISHWASHER SAFE The container is lightweight with drop-safe glass It is completely safe for use in the freezer microwave and dishwasher The base container is made from durable wood fiber making it easy to hold after microwave use.
  • CONTEMPORARY + DURABLE DESIGN The lunch container’s lid is made from stainless steel (do not microwave) The wood fiber base is made from polypropylene and 30% wood ethically sourced FSC certified forests it is hard-wearing and microwave friendly.
Check Stock

Nuogo 20 Pcs, 6 oz Frosted Candle Jars Empty Candle Tins with Lids for Making Candles DIY Candle Containers Glass Jar Making Candle Kit for Making Candle Gifts

  • What You Will Receive: you will receive 20 pieces of candle glass jars in 10 colors, 20 pieces of lids, 2 pieces of rubber heat insulating pads, 2 sheets of sticky labels, and 1 piece of pen, abundant in quantity, enough to choose and replace, easy to meet your daily DIY needs.
  • Proper Dimension for Using: the candle glass jars are about 3.1 x 2.4 x 2.2 inches/ 8 x 6.2 x 5.5 cm, 6 oz in capacity, having many colors, mainly purple, white, pink, gray and more, beautiful and bright.
  • Reliable Material: the candle glass jars are made of glass material, sturdy and reusable, firm and solid, not easy to break, deform or fade, easy to clean, which are dishwasher safe and can be stored in the refrigerator.
  • Wide Application: the candle glass jars use frosted texture, which can make the candlelight more beautiful and soft, adding a warm and romantic atmosphere, suitable fo....
Check Stock

Luigi Bormioli Double Walled Irish Coffee Mugs - 8½ Oz (2 Pack) Insulated Tea Glasses, Drinking Glasses, for Latte, Espresso, Cappuccino, Desert Dish, Thermal Shock Resistant, for Hot - Cold Beverages

  • Double Wall Thermal Glass: 2 pack 8 1/2 oz.,maintains precise temperature of any beverage , the outside layer insulating the glass. It can be removed from the microwave with bare hands and held for extended periods of time, as it won’t burn hands and glass won’t sweat..
  • Borosilicate Glass: Thermal shock resistance gives you the ability to switch between freezing cold and boiling beverages in instants, glass not cracking from extreme temperatures. It being of clear, hand blown glass ,you can see your drink while sipping, and there are none of the toxins found in plastic. These glasses is designed in Italy and Made in China with the Luigi Bormioli Standards.
  • Traditionally Modern: Mug is fashioned with the traditional Irish coffee cup design, only with the modern double wall feature. Attractive and charming, it makes a fabulous gift for holidays, housewarmings,or just a coffee lover. Fits beautifully under most coffee machines..
  • Multiple Uses: Insulated cup is perfect for any time you want to keep soup, mashed potatoes,coffee, juice, even water, insulated. Perfect for coffee stations, meetings, sweltering days and frigid nights.
  • Dishwasher, Microwave, Oven Safe: Glass is heat resistant thus enabling it to be placed in oven for up to 350°F (176°). Micr....
Check Stock

3M Outdoor Insulator Film Mounting Tape, .5-Inch by 13.8-Yard

  • The half-inch in tape width makes it easy to apply around window frames and casings.
  • The tape is easy to apply and has a ready-to-peel liner.
  • Creates a strong bond between the surface tape and film securing an air tight seal.
  • Shrinks tight for wrinkle-free clear-as-glass results.
  • Increases R-value by 90% over an average single pane window.
  • Creates a strong bond between the surface, tape and film, securing an air tight seal.
  • Shrinks tight for wrinkle-free, clear-as-glass results.
  • Increases R-value by 90% over an average single pane window..
Check Stock

PetSafe Extreme Weather Sliding Glass Pet Door, Easy to Install, Perfect for Rental Homes and Apartments, Insert for Patio Sliding Glass Doors, Large Size

  • ENERGY EFFICIENT: This energy-efficient sliding glass pet door has dual-paned glass, weather stripping and 3 insulating pet door flaps to keep the weather out and help optimize your energy bill.
  • PERFECT FOR RENTERS: This pet door is easy to install and detach.
  • uses the included adhesive strips so you can easily take it with you if you and your pet move.
  • ADJUSTABLE FIT: The pet door easily installs into your existing sliding glass door track and the height automatically adjusts to ensure a proper fit.
  • 3 FLAPS INSTALLED: Pet door includes 3 flexible flaps with a magnetic seal to insulate against the outdoor weather.
  • SECURITY LOCK: To lock your door, mount the included security bar between your door frame and the interior sliding panel of your glass door.
  • 2 INSTALLATION OPTIONS: You choose whether to secure the pet door in place with adhesive or the included screws.
  • LARGE SIZE: Sliding glass pet door is best for pets up to 100 pounds.
  • Door opening measures 10 1/4 in W X 16 1/4 in H.
  • CUSTOMER CARE: Let our pet product experts help.
  • we’re available Monday through Saturday to answer your questions.
Check Stock

Dragon Pet Door for Vinyl Sliding Glass Doors Double Flap Large Short 74.75 - 77.75 White

  • The Dragon Pet Door for Vinyl Sliding Glass Doors is an economically friendly choice that gives you the value of a patio panel pet....
  • This pet door panel is designed specifically for vinyl sliding glass doors in standard vinyl track and height sizes, with a....
  • The Dragon's double flap keeps your home more insulated a single flap door, and provides better energy efficiency than other....
  • The Dragon vinyl patio panel is ready to install right out of the box.
  • it's quick, tool-free installation is easily removable....
  • Tough, two-piece flap design has improved weather resistance than the competition, with magnets and superior engineering to....
Check Stock

Micarta Linen LE Phenolic Sheets .250inch (1/4inch) Thick x 12inch x 36inch,Natural(KS-2356-21-10)

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

AIMIMI Bakelite Rod Brown Insulating Sticks Phenolic Resin Electrostatic Prevention Suitable for Structural Parts Length 500mm,Diameter,35mm

  • ✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
  • ✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
  • ✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
  • ✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
  • ✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..
Check Stock

5\ Tall x 1-5/8\ Wide Kiln Post - 4 Pack

  • Microwave Kiln Glass Fusing DIY Tools Fit For Microwave Kiln Kit Art Work.
  • The microwave kiln is a container kiln consisting of a base and hood made for use in a household microwave oven. The kiln is made of a white insulating fiber and lined on the inside of the chamber with a black compound that absorbs the microwave radiation and heats up to 1650°F.
  • The heat from this compound is then transferred to the chamber and to the piece being fired. It takes between 5 to 10 minutes to reach peak temperature ranges depending on the size of the microwave kiln, the work being fired, and the microwave's wattage. After the firing, the kiln needs to cool for at least 20 minutes before being opened.
  • Designed for working primarily with small glass objects or precious metal clay, the microwave kiln is also suitable for firing small clay pieces, from beads and pendants to test tiles or small sculptural objects.
  • The optimum firing time for various materials and sizes needs to be determined through test firings..
Check Stock