Top For Use With Cordless Drills
BOSCH BM2005 1/4-inch Fast Spiral Rotary Masonry Drill Bit for Brick and Block (1/4\ X 2\ X 4\)
- For drilling in brick, cinder block and tile.
- Use with corded and cordless rotary drills.
- Drills twice as fast as standard masonry bits.
Check StockBOSCH BM2002 5/32-inch Fast Spiral Rotary Masonry Drill Bit for Brick and Block (5/32\ X 2\ X 3\)
- For drilling in brick, cinder block and tile.
- Use with corded and cordless rotary drills.
- Drills twice as fast as standard masonry bits.
Check StockCordless Drill into a Wall
- ➤ Cordless Drill with 1/2 Chuck: 1/2 in. ratcheting chuck provides superior bit gripping strength. Compared with 3/8" drills has unbeatable....
- ➤ High Performance: 400 in-lbs torque, 2 variable speed setting(0-400rpm&0-1,600rpm), 20+1 torque settings. This drill covers most occassions, allow....
- ➤ Ergonomic Designs: drill body little bit larger than 3/8" drills with much more solid, higher performance. The side handle increased comfort,....
- ➤1,000+ Cycle Use Battery: PowerSmart 20V battery allows at least 1,000 cycle use. The included 1,500mAh battery was tested can driver #8x1-1/2 in.....
- ➤ What's more: built-in LED foot light, battery indicator, rubber-covered handle, etc. Backed by a 2-year, limited warranty so you can buy with....
Check StockPVC Pipe Reamer PVC Fitting Saver PVC Socket Saver with 0.315 Hex Shaft 1-½-Inch and 2 Inch Head Aluminum for Water Lines Drain Lines Vent Lines
- Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC....
- Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
- High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
- Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
- Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
- It is recommended to use a variable-speed electric drill....
Check StockMELOTOUGH Tool Holster Cordless Drill Holster/ Hook Single Tool Belt Hook…
- ✅Cordless Drill Holster Work with Tool Belt.
- ✅Easy Use , Right Hand and Left Hand both work ok.
- ✅Use to hold cordless drills, nailers, staplers, saws, gardening tools and more..
- ✅Great Gift for Lover: you can try out this useful gadgets as the mens gifts, dad gifts from daughter, husband gifts from wife.
- ✅TOTALLY RISK FREE - If you are not satisfied with your tool holster,contact us any time,we will get you back within 24 hours try our best to make things right..
Check StockCocowin PVC Pipe Reamer, PVC Fitting Saver, PVC Socket Saver with 1-½-Inch and 2 Inch Head Aluminum for Water Lines, Drain Lines, Vent Lines
- Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
- It is recommended to use a variable-speed electric drill with low-speed cutting.
- Appropriately add water for cooling to prevent the pipeline from melting at high temperature..
- Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC and ABS Ventilation Pipe, Drain Pipe, Water Pipe..
- High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
- Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
- Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..
Check Stock7Pcs Drill Adapter Impact Grade Power Hand Tools 1/4in Magnetic Socket Hex Shank Extension Rod Drill Adapter
- Excellent Material: super heat-treated chrome vanadium steel, suitable for ordinary and impact drives, easy to use, light in weight, and can be quickly connected to standard hex nut drivers, impact hole saws, spade bits, etc..
- Good Conversion Accessories: 3 different utility tools for installing hexagonal tools, such as pneumatic screwdrivers, electric screwdrivers, pneumatic drills and manual screwdrivers..
- Compatible with Quick-change: 105°angle 1/4in hex bit adapter is compatible with quick-change, suitable for most electric drills, cordless drills, manual wrenches and screwdriver chucks..
- Quick Release Rod: 1/4in hex handle magnetic extension chuck adapter quick release rod hex socket screwdriver drill chuck suitable for electric and pneumatic screwdrivers and other electric tools..
- Color Adapter Kit: 3 pieces of color socket adapter impact kit includes 1/4 inch drive adapter, 3/8 inch drive adapter, 1/2 inch drive adapter..
Check StockCar Music Drill Bass Beat (New York Drill Instrumental)
- ...batteries and a compatible charger, the strong endurance can ensure you work for a long time without worrying about losing power during work. A battery can be worked for 3.5 hours in normal operation, and it only takes 2.5 hours to fully charged..
- ✔【What You Get】:The cordless impact wrench include 1pc impact wrench,2pcs battery packs and fast charger,6pcs impact sockets (14mm/17mm/18mm/19mm/21mm/22mm),8Pcs drills and 6pcs screws,1pc driver adapter,portable strap,and tool box.An electric wrench can be used for drills, screwdrivers and other functions at the same time to meet all your needs..
- ✔【2-Speed Control】:Cordless impact wrench'step-less variable control can be carried through the on/off switch to control the torque accurately (2-speed: 0-2600rpm,0-3800rpm .You can adjust the torque according to your needs, improve work efficiency and save battery energy..
- ✔【LED Light & Cooling System】:The built-in LED light helps you to work in a very dark place or narrow environment without light. The rubber touch handle can absorb shock to protect your wrist. The excellent cooling system keeps the electric wrenc....
Check StockDEKOPRO 126 Piece Power Tool Combo Kits with 8V Cordless Drill, 10MM 3/8'' Keyless Chuck, Professional Household Home Tool Kit Set, DIY Hand Tool Kits for Garden Office House Repair
- 【8V Power Cordless Drill with LED】The 8V Power Cordless Drill can be used for drilling in wood and plastic, and also for tightening/loosening screws.Press the switch to adjust the speed of the electric drill, and the maximum no-load speed of the mini drill is 800r/min. Equiped with built-in LED light, and the net weight of the hand drill is only 1.65 pounds, and it is easy to operate with one hand..
- 【1.5Ah Rechargeable Battery,type-C cable】This drill is supplied with a type-C 1.5A charging cable.You can connect it to a universal charger or USB output(5Vd.c)to charge the tool.The battery indicator light is at the back of the tool, when the green battery indicator is stable without blinking,the battery is full..
- 【Ergonomic Design, Easy to Use】Cordless tools are made of alloy steel, chrome plated to prevent corrosion, grip is anti-skid and comfortable. Light, durable, strong, safe and compact tools are perfectly suitable for longer life. Four precision screwdrivers are for smaller fasteners on home appliances and electronics, two full size screwdrivers and bit driver handle when only a manual touch is needed, a hammer, pliers, tape, and box cutter for an a....
Check StockTradeGear Heavy Duty Drill Holster w/ Drill Bit Organization – Ideal for Most Cordless Drills and Hammer Drill Brands – Features Adjustable Strap with Quick Release Buckle, Belt Loop/Belt Hook Options
- KEEPS YOUR DRILL WITHIN EASY REACH: Keep your cordless drill on at all times when working with this heavy-duty drill holster. It features a safety strap with quick release buckle that keeps your drill safely inside the holster while still giving you quick access whenever you need it..
- IDEAL FOR MOST DRILL BRANDS: This is the only holster you need for your cordless drills. It fits everything from simple drill drivers to impact drivers too. The adjustable strap can be lengthened or shortened to accommodate drills of different brands and sizes..
- KEEPS YOU NEAT AND ORGANIZED: More than just holding your drill when you need your hands to be free, TradeGear’s drill holster features multiple inner and outer pockets & sleeves along with a pencil holder..
- SUPER DURABLE DRILL HOLSTER: Our custom cordless drill holster is made from 1680D ballistic PVC coated fabric. It is super strong and durable enough to last through years of use. Every stitch is precisely placed to ensure that you get a holster that you can count on for your most demanding jobs..
- MULTIPLE FASTENING OPTIONS FOR BETTER CONVENIENCE: This holster features belt loop or belt clip options for fastening to your work belt. It is also angled for better balance. Every purchase you make from us gets you n....
Check StockGrinder Chuck Key 0.3-3.2 Clamping M8 for Offices Garages(Short tail M8x0.75 chuck + rod set)
- Made of high quality brass and aluminum alloy for durability and long life.
- Three-jaw head chuck with a wide gripping capacity of 0.3 mm to 3.4 mm.
- The universal 1/8 inch chuck can be connected to many electric drills, cordless drills etc..
- Comes with a practical Allen key that you can use to easily tighten or loosen.
- This drill chuck would be a great replacement for your old or broken one.
Check StockStrikeMaster Lite-Flite Lazer Drill Unit 8"
- AUGER DRILL ADAPTER: Convert hand auger into a power auger with this ice auger adapter for cordless drill.
- Must-have ice fishing accessories to break ice into ice holes.
- CONNECTIVITY: Ideal cordless drill ice auger attachment to perfectly fit majority augers including Eskimo, Expert Pro, Arctic, Spiralen, Easy Ice, Viking, Micro and StrikeMaster augers (Mora & Lazer).
- NON-COMPATIBLE with all other diameters, bolted joints, or augers with the threaded connection.
- POWER DRILL COMPATIBLE: Recommended to use with cordless power drills of 18V–3Ah 40/80 Nm.
- DURABLE STEEL CONSTRUCTION: Zinc plated high-quality carbon steel construction for robustness and corrosion resistance.
- Lightweight ice fishing auger drill adapter for convenient handling and transport.
- SAFE AND EASY TO HANDLE: Non-rotated rubber-coated handle adds safety, control, and protection.
- 0.23" and 0.31" holes allow for universal utilization of ice auger drill bit and a little extension of the screw conveyor.
Check Stock