Top Force Measurement

Digital Force Meter, 0N/100N/300N/500N Digital Display Dynamometer Force Gauge Push and Pull Tester Meter with 5 Side Heads for Industries Machinery (100)

  • HIGH QUALITY: This push-pull force gauge is made of high-quality metal + plastic materials, strong and durable, not easy to damage, and long service life..
  • TWO MODES: This digital push-pull force gauge supports peak/real-time two modes, adapting to changes.
  • it supports real-time display of values and also supports keeping the peak value unchanged..
  • INSTANT READING: high-definition large-screen display, high sensitivity, graduation value of 0.01, accurate value of thrust and pull, digital display design, reading is more intuitive, clear and convenient..
  • MULTIPLE UNIT CONVERSION: Newton, kilogram, pound and other commonly used measurement units can meet a variety of needs and are more convenient to use..
  • WIDELY USED: Digital push-pull force gauges are now widely used in electronics, high and low voltage electrical appliances, automobiles, chemicals, light industry, construction and other industries and scientific research institutions for tensile and compression loads, insertion and extraction forces, destructive test tests, etc..
Check Stock

QKVCX Shooting Speed Tester Precision Ballistic Chronograph Bullet Bow Arrow Velocity Meter Measurement Tool with Tripod.

  • Aluminum alloy, stainless steel material, support rod, velocity measurement, energy measure, speed energy, looking through record and view average..
  • It is mainly used to learn and experience the ability of the SCM to process data at high speed, and it can measure the flying speed of various projectiles. Such as: table tennis, badminton, bow, arrows, physical acceleration experiment, projectile free fall experiment, nerf playthings speed measurement, children's soft playthings, etc..
  • Test the speed of the shooting toy to prevent excessive force and unsafe. It is a must-have product to prevent the safety risks of shooting toys..
  • The device is accurate with +/-1% of measured velocity, or better..
  • Can be mounted on tripop or just placed on table/bench top..
Check Stock

OXO Steel Single Wall Cocktail Shaker

  • Single-wall Stainless Steel cocktail Shaker features two silicone gaskets to create a leak-proof seal.
  • Parts are easy to separate without excessive force or fear of sticking.
  • Cap also functions as a jigger with printed Measurement markings ½ oz ¾ oz 1 oz and 1 ½ oz.
Check Stock

AQUA TRAINING BAG® Sensor

  • LEVEL UP YOUR TRAINING – Link to your smartphone with our FREE App to track past workouts and store your data.
  • ROUND-BY-ROUND ANALYTICS – Measure your rounds with Punch Force, Hardest Punch, Punch Calorie Measurement, and Punch Frequency Indicators.
  • PERSONALIZED USER EXPERIENCE – Personalize your workout with Power Punch Threshold, Round Timer and Start/Stop Bell customizations.
  • EXCLUSIVE COMPATIBILITY – The Aqua Training Bag Sensor works exclusively with 15”, 18” and 21” Aqua Training Bags.
Check Stock

HORUSDY 30-Piece Hex Key Set, Allen Wrench Set Inch/Metric MM(0.7mm-10mm) SAE(0.028\-3/8)

  • Heat-treated steel with black-oxide finish, contains 15 pieces of long reach keys and 15 pieces of high leverage short keys..
  • The conventional drive end on both the long and short length keys, allows high leverage on stubborn fixings..
  • Come with a torque handle for adding force when loading and unloading the fasteners,Increase extra reach and greater torque..
  • This 30-pieces AlHigh-visibility sizes marked on each wrench and sturdy carrying case for fast size selection and easy organizationlen key set completely covers all hexagon socket screws and contain both inch and metric measurement.
  • This 30-pieces Allen key set completely covers all hexagon socket screws and contain both inch and metric measurement.
Check Stock

INPANOLS Magnetic Z Axis Zero Pre-Setter Tool Setter for CNC Milling Machining Lathe Centers, 50mm Height, 0.01mm Accuracy

  • ★LARGE MEASURING SURFACE: Measuring surface diameters up to 44mm for easy handling.
  • The step design allows the tool setter to test tools with a diameter greater than 44mm..
  • ★STRONG MAGNETIC DESIGN: The Z-Axis Pre Setter has 3 strong magnets embedded in the bottom, easy to fix and non-slip, and can be used horizontally or sideways..
  • ★EASY TO CALIBRATE: Easy to be calibrated by a polished parallel plate or calibration metal rod..
  • ★SMALL SPRING FORCE: The elastic force of the spring inside the measuring surface is small, which can effectively avoid the breakage of small milling cutters or small drills..
Check Stock

BAOSHISHAN 100lb Push Pull Force Gauge Force Tester Meter with Calibration Certificate and Carrying Case, for Tension and Compression Load Plug Force Destructive Tests DL-100LB

  • ...y: ±0.5% | Net weight: 1.3kg/2.8lb | Relative moisture: 15%~80%RH | ONE YEAR warranty and professional technical support.
  • [HIGH QUALITY & ACCURACY] -- The shell of the tension force gauge is made of high-quality ABS plastic, with high strength and good toughness. The pointer dial is convenient for reading, accurate measurement and high precision. Each trigger tension gauge contains a calibration certificate, a quality certificate and a user manual..
  • [VARIOUS ACCESSORIES] -- Pressure test parts *4, Tenslie test part *1, Extensive shaft *1, which are able to meet most of the experimental requirements. The spring tension scale and various accessories can be put into the carrying case for convenient storage and carrying..
  • [PEAK/TRACK] -- The knob controller on the pull gauge can switch between the peak value load test and the continuous load test. Switching modes according to different experimental occasions can bring great convenience to your experiment..
  • [WIDELY APPLICATION] -- The handheld force gauge is widely applied in pull push load testing industry like electric, high & low voltage electric appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile and insertion force or destructive experiment..
Check Stock

Jonard GPP-15 Polystyrene Push Pull Precision Force Gauge, 0-15lbs, 0-6840 Graduation, +/- 1 Accuracy

  • Measures tensile (pull) or compression (push) forces.
  • Analog gauge shows measurements in ounces (oz.) or grams (g).
  • Measures present force with a measurement accuracy of + or - 1 graduation.
  • Made from polystyrene, which resists wear.
  • Measures 14 x 1 x 1-1/2 inches (H x W x D).
Check Stock

SprayMax 3680065 2K Matte Clear Coat 400 ml (2 Pack)

  • Matte Finish: Clear coat for small damage repair or complete paiting of mounting parts.
  • Fast Drying: Matte Clear Coat dusts dries in 12 minutes and force dries in 60 minutes at 140°.
  • Aeorsol Coverage Area: The Matte Clear Coast covers approximately 5.4-8.1 square feet at 64°F-77°F.
  • Weather Resistant: Contains acrylic resins & aliphatic isocyanates leading to higher UV stability.
  • Gloss Level: Matte Finish contains 12 ± 3 gloss units at 85° measurement angle on dried basecoats.
Check Stock

Metric Micrometer

  • 【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
  • 【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
  • 【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
  • 【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
  • 【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....
Check Stock

OXO Steel Single Wall Cocktail Shaker & SteeL Angled Measuring Jigger

  • Product 1: Single-wall Stainless Steel cocktail Shaker features two silicone gaskets to create a leak-proof seal.
  • Product 1: Parts are easy to separate without excessive force or fear of sticking.
  • Product 1: Cap also functions as a jigger with printed Measurement markings ½ oz ¾ oz 1 oz and 1 ½ oz.
  • Product 2: Patented angled surface allows you to read measurements from above.
Check Stock

HDE Professional Digital Infrared Photo Tachometer RPM Motor Speed Gauge Tach

  • Hand hold design, simply and convenient to operate..
  • Widely used for force measurement in electronics, electrical appliances, hardware, auto parts, chemical industry, pen making, light industry, textile, machinery and other industries..
  • The dynamometer can be mounted on various workbenches, or work with clamping tools..
  • The push pull dynamometer has a dial gauge with analog signal and a 10N capacity..
Check Stock