Top Ford Focus Clutch Bleeding Tool

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

Mekar Pneumatic Fan Clutch Wrench Set Clutch Removal Tool Kit Compatible with Jeep, Ford, GM,Chrysler

  • 【Fitment】: Compatible with Ford, GM, Chrysler and Jeep vehicles (Kindly note: please make sure the size you need before purchase).---Product quality has been upgraded, please rest assured to buy. Support one-year warranty..
  • 【High Quality Material】: Made of 1/4" thick steel, durable and high strength, Corrosion and rust resistance..
  • 【7 Driving Wrenches Sizes】: 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2" (the slim new 47mm wrench tool is suitable for Ford 6.0L and 6.4L Powerstroke diesel pickup trucks), comes with a Storage bag, which is easy to store and carry..
  • 【Function】: When servicing the water pump or fan clutch, our special tool can easily remove and install the fan clutch. You can install it around the clutch and release the clutch by quickly pulling the trigger, and finally releasing it (Kindly noted: use with an air hammer)..
  • 【Package Included】: 7*Wrenches + 1*Storage bag. ------Guarantee: Any problem about the product, please feel free to contact us. Support one-year warranty and return service.(Including return and refund service).
Check Stock

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

  • Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
  • Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
  • The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
  • This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
  • The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check Stock

43300 Pneumatic Fan Clutch Wrench Kit Removal Tool Kit Compatible with Ford/GM/Chrysler/Jeep

  • Compatible with Ford, GM, Chrysler & Jeep, fit for 4.3L, 5.0L, or 5.7L GM pick up (van, mini-van, or SUV). (Please ensure correct size before purchase)..
  • Includes 7 driving wrench sizes: 7/8", 32mm, 36mm, 40mm thin, 47mm, 1-7/8", and 2" to fit Ford 6.0L and 6.4L Powerstroke diesel pickup..
  • Easy to use,simply slip the tool into the air hammer, select the correct wrench size for the fan nut, and a couple of pops of the air hammer will loosen the fan clutch. Easily removes and installs fan clutch when repairing water pump or fan clutch. No need for any other special pinning tools..
  • Made of durable 1/4" thick steel for high strength and durability, with great resistance to corrosion and rust..
  • Comes with a storage bag for easy carrying..
Check Stock

Acouto Brake Bleed Kit, Brake Bleeder Vacuum Pump Vacuum Tester Brake Bleeding Tool Kit for Car Motorcycle

  • Multi-function diagnostic tool used to test a variety of essential engine and associated functions.
  • The kit includes an accurate gauge for testing and servicing many different pressurized systems, also includes reservoir, hoses and adapters for bleeding brake and clutch systems.
  • The brass body, high abrasion resistance, high strength and corrosion resistance.
  • Made by high quality copper alloy + iron + rubber material, durable and rugged, Contained in a blow mold case for easy transportation and storage.
  • Professional bleeding kit helps you get the brake bleeding job done quickly and effectively.
Check Stock

HaroldDol AC Air Compressor With Clutch YCC257，Air conditioning compressor Replacement For 2011-2016 F250 F350 F450 F-550 6.7 6.7 Diesel

  • 【APPLICATION】B A/C Compressor Clutch Remover Installer Puller Tool Kit, is used to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors and fit for GM, fit for Ford, fit for Chrysler, imports, and others.
  • 【EASY TO USE】Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads.
  • 【HIGH-QUALITY】A/C Compressor Clutch Remover is made of stainless steel with a black coated finish, durable and long lasting.
  • Resists rust and corrosion under proper care and lubrication.
  • 【PACKAGE INCLUDED】This kit includes puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • 【CARRYING CASE】Comes with a carrying plastic carrying case for easy organization, storage, and transport.
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

GEARWRENCH Universal Pulley Holder - 3900 15 Inch

  • Unique Time Saving Tool is Designed to Trap and Hold Bolt-On Pulleys By the Mounting Bolts on Most Applications.
  • When Used in Conjunction With Fan Clutch Wrenches it is Especially Useful in Removing and Replacing Thermostatic Fan Assemblies.
  • Applications for Use in Fan Clutch Removal Include: Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L, and 5.0-L Engines.
  • Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 8.0-L and V10 Engines.
  • GM Trucks W/4.3-L, 5.0-L and 5.7-L Engines.
Check Stock

HRNAKDFKL 17 PCS Clutch Centering Tool, Clutch Spindle Universal Joint Set, Auto Centering Tools, Centering Clutch Kit

  • High quality: Precision manufactured steel bushes with chemically blackened finish, durable and sturdy..
  • Quick selection: Laser-etched sizing to make recognition of the correct size tool quick and easy..
  • Multifunctional: For fast accurate alignment of flywheel pilot hole and clutch drive plate when assembling to car..
  • Scope of application: It is suitable for use on most cars and light commercial vehicles, like Audi, Citroen, Fiat Ford, Honda, Mitsubishi, Nissan, Opel, Peugeot, Rover, Saab, Toyota, VW, Volvo..
  • Package included: Come with a alignment tool shaft, 8pcs pilot Bearing adaptors and 8pcs Clutch Plate adaptorrs..
Check Stock

Black Leather Gear Shift Knob Cover for Ford Focus 2012 2013 2014 2015 2016/ Ford Fiesta 2014 2015 2016 / Ford Fusion S / Fusion SE 2013 2014 2015 2016 / Fusion Gear Shift Cover / Accessories for Ford

  • Black Leather Gear Shift Knob Cover for Ford Focus 2012 2013 2014 2015 2016/ Ford Fiesta 2014 2015 2016 / Ford Fusion S,Ford Fusion SE 2013 2014 2015 2016. Fusion Gear Shift Cover.
  • Made of high-quality leather, soft and comfortable. It can protect the Gear Shift for Ford model. Compared with ordinary leather, it is more durable and more comfortable..
  • The installation can be completed in about 15 minutes, and we believe you will be satisfied with the effect after installation.
  • For the installation of the shift knob cover, please refer to the video on the page.The installation tool is included in the product package, you can easily install the shift knob cover on your car..
  • Used as an accessory for Ford models. Fusion Gear Shift Cover/ Focus Gear Shift Cover / Fiesta Gear Shift Cover/ Fusion S, Fusion SE Gear Shift Cover..
Check Stock

Lisle 43300 Pneumatic Fan Clutch Wrench

  • Quickly removes and installs fan clutch when repairing the water pump or fan clutch..
  • Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L....
  • Use with an air hammer. Includes blow molded storage case..
Check Stock