Top Forged Brass Fittings

SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF

  • SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

YAETEK Swaging Tool Kit – Flaring Tool Kit - Tube Cutter Rachet Wrench Swag Tool - 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8 to 3/4 for HVAC Water Gas Pipe Automotive Plumbing

  • Sizes of This YaeTek Swaging Flaring Tool Kit: Flare adapters 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" OD.
  • Material: Swivel is made of alloy steel, chrome-plated to assist in reducing friction.
  • Yoke is heat-treated forged steel with max strength and....
  • Do your Brake Line Job: This YaeTek Flaring Swaging Tool Kit 10pc Tubing Flaring Kit includes 2 bars (9 sizes) with a self-centering, slip-on yoke to....
  • A CompleteFlaring Tool kit with necessary tools to complete your job.
  • This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel....
  • Package includes flare adapters, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying....
Check Stock

(Pack of 2) EFIELD Push Fit 1/4 Turn Straight Stop Valve Water Shut Off 1/2 Push x 3/8 Inch Compression Chrome with a Disconnect Clip

  • Directly Supplied by One of the Biggest Plumbing systems Manufacturers.
  • Lead Free DZR Forged Brass Fittings Size 1/2 Inch push x 3/8 Inch Comp and 1/4 Turn on/off with a Disconnect Clip.
  • 200 PSI and 200 Degrees F. Use in Potable water and Hydronic Heating Applications..
  • No Tools, No Soldering, No Crimping or Glue. Push to Connect..
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

Hurricane 6 Pieces SAE Flare Nut Wrench Set 1/4' to 1', offset end wrench, 6 Point

  • Premium Material: Made from the Best Forged Chrome Vanadium Steel for a High Quality, Long Lasting Tool..
  • Surface Treatment: Fully Polished and Chrome Coated support best Anti-Rusting Surface.
  • Application: 6 pc SAE flare nut wrench set works on a variety of hexagonal fittings, from aluminum and copper to brass. It also features a traditional wide profile for greater leverage..
  • It is widely used on brake, steering and refrigeration lines, it also comes in handy for mountain bike suspensions and other bicycle repairs. 15-Degree Offset Ends meets different application..
  • Includes: SAE 1/4 in x 5/16 in， 3/8 in x 7/16 in， 1/2 in x 9/16 in， 5/8 in x 11/16 in，3/4 in x 13/16 in， 7/8 in x 1 in.
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Gsinodrs 3PCS Brass Pipe Fitting 1/2 Female NPT Thread x 1/2 Male NPT Thread Brass Hex Pipe Fittings Adaptor 1200psi High Pressure

  • 【Metal Adapter】Our pipe fitting solid brass constructed, strong and wear resistant more durable than iron and iron galvanized pipe fittings. 3PCS-....
  • 【Durable and Steady】Heavy duty brass pipe fitting construction has excellent performance in terms of corrosion resistance, high temperature....
  • 【Widely Application】Adapter for connecting pipes or fittings of different thread types, brass is corrosion resistant and can be used in wet....
  • 【Temperature Rating】Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to....
  • 【Reliable Quality】The pipe fittingadapter can widely used in your life. 24 months warranty for the adapter, any issue, please contact us..
Check Stock

30 Pcs 1/2 Inch Brass PEX Fittings with 100 Half Clamp J Hook with Nail Black Pipe Supports PEX Mounting Bracket Coupler Crimp Fittings for PEX Tubing Fitting Connection (Elbow, Tee, Straight)

  • Extensive Usage: these PEX tubing clamps are suitable for copper crimping ring system, plastic or rubber hose, PEX crimping tool and brass crimping accessories, also nice for hot or cold water systems, nice combination to meet your needs in different applications.
  • Easy to Install: this brass PEX fittings kit can be installed without flame, flux or glue, which can help you save time and energy, simple and convenient to use, and can provide a nice using experience for you.
  • Size Details: the crimp PEX fittings are compatible with crimping or cinch type rings and connectors.
  • The adjustable size range of black pipe supports with nail is about 10-14 mm/ 0.39-0.55 inch, please choose the right size before ordering.
  • Solid and Sturdy: these PEX pipe fittings are made of quality brass, safe and stable, solid corrosion resistance, high temperature ductility, waterproof and oilproof, which can be applied for long time.
  • Nice Combination: you will receive 30 pieces of 1/2 inch brass PEX fittings, including 10 elbow, 10 tee and 10 straight coupler crimp fittings, 100 black half clamp j hook with nail, sufficient quantity can easily meet your daily use and replacement needs.
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock