Top Formula 1 Pneumatic Valves

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

Mtsooning 10PCS Air Pneumatic Flow Control Mufflers 1/4inch Exhaust Muffler Filters Bronze Thread Hex Brass Silencer Replacement for 1/4 NPT BSL-02

  • MATERIAL: The pneumatic Mufflers are made of copper, with high pressure resistant, not easy to rust and trip, providing better noise reduction..
  • SIZE: The size of the brass flow control muffler is thread outer diameter: 1/4 inch/12.5 mm.
  • thread length: 0.28 inch. Please pay attention to whether the size of the product matches your device before placing an order..
  • PRINCIPLE: The sintered exhaust muffler designed in many small holes drilled in the pipe wall, when the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
  • APPLICATION: The thread hex brass muffler can be used in air cylinder, solenoid valves, crankcase, gearbox, oil tanks and pneumatic tools, etc..
  • PACKAGE: You will receive 10PCS exhaust muffler filters, and if you have any question about our product , please contact us. We are here to serve and support..
Check Stock

5 Pieces Pneumatic Ball Valve Push to Connect Fittings Ball Valve PVC Air Flow Control Valve Air Fittings Straight Quick Connect Union Air Quick Connect Air Hose Fittings (1/4\ x 1/4\ OD)

  • Size Information: you will receive 5 pieces of black air line valves, classic combinations can meet your daily use.
  • At the same time, the size is 1/4 inch OD, please read our information sheet and consider whether the size fits.
  • Quality Material: pneumatic fittings with reliable plastic materials and copper, not easy to fall off after connection.
  • They don't break easily, and have nice sealing performance, not easy to leak.
  • Air valve can be applied for a long time.
  • Working Pressure: quick connect tube fittings can be applied to water (maximum pressure: 50 PSI) and air (maximum pressure: 145 PSI).
  • When be applied with water, the pressure shall not exceed 50 PSI, and operating temperature: 32 to 140 Fahrenheit.
  • Easy Operation: after installation, you can freely change the direction of the push to connect fitting without manually inserting or pulling.
  • They are easy installation, flexible, save space, freely rotate, release ring ellipse design, easy disassembly.
  • Wide Applications: quick connect air hose fittings are suitable for air duct, pneumatic tools and so on, you can use them to connect others and different pneumatic components.
  • They are suitable for PU/ PA/ PE/ PVC products.
Check Stock

FibroPool 1 1/2\ POSI- Close Non- Lube Check Valve

  • Medical grade PVDF material, safe and nontoxic.
  • Normal performance under -30 ℃ to 150 ℃, excellent chemical and hydrolysis resistance, outstanding ozone, UV and weather resistance..
  • Size Reference:These Check valves measures approx. 4 mm in diameter and 38 mm/ 1.41 inches in full length, please make sure of our size when you buy it..
  • Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
  • Flow smoothly, small fluid resistance, good sealing performance, short spool stroke, small off valve impact force, attractive appearance and high reliability..
Check Stock

SMC NAD402-N04 Auto Drain Valve, 1/2\ NPT

  • Typical Application:Instrumentation, hydraulic and pneumatic systems.
  • Heavy duty Viton seal for long term safety.
  • Material:Brass bodies, steel handles except where noted..
  • Polyline valves have brass bodies and brass handles..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

5pcs/set Pneumatic Muffler 1/8\ NPT Brass Body Valve Thread Adjustable Silencer Noise Exhaust Thread Flat Head Pneumatic Air Flow Speed Controller

  • Working Pressure: 0-1.6 Mpa.External thread size: 9.5±0.2mm.
  • This muffler is made of high quality copper and iron material,durable to use.
  • The silencers are used to reduce dynamic noise of the pneumatic components or device exhaust.
  • Easy installation and high noise reduction result, quick and reliable connections.
  • Widely used for valves, cylinders,oil tanks, air tools and some other systems that need mufflers to clean the exhaust air and reduce the noise.
Check Stock

Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces

  • Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
  • Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
  • Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
  • This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
  • Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
  • Note: when installing the check valve, pay special attention to the flow direction of the medium.
  • The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check Stock

ANPTGHT One Way Check Valve 1/8 3MM Hose Barb Non Return Ozone Resistance Plastic Valve for Water Fuel Oil Air Gas Pack of 3

  • 【Material】 Plastic barb connector, made of high-quality PVED material.
  • 【Size】 1/8" OD One Way Check Valve，Can fit 1/8" hose ID.
  • 【Function】The check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air..
  • 【Performance】Hose barb check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa. Normal performance under 25 ℃ to 60 ℃,Strong resistance to acid, alkali, salt corrosion ability.
  • 【Design】The check valve is designed with a non-slip card slot inside, which has strong adsorption performance, prevents falling off, non-toxic, and has air tightness..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock