Top Fpc Assembly Cable

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip for Bedroom TV Back Lighting Christmas Valentine s Day Black PCB

  • 【Black FPC LED Strip Light】The FPC is black, which is different from most of white FPC strips. Perfect black FPC strip for you to decorate TV,....
  • 【RGB Color Changing Rope Lights】The led chip is SMD 5050, and each LED contains R, G, B, three independent lamp beads. You can use one RGB remote....
  • 【IP65 Waterproof Tape】This 16.4ft length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Low Power Consumption Strip】This rope light works with 12V power adapter, low Power Consumption & environmental. Safe to touch. (DC 12V Power is....
  • 【Best After-Sales Service】Please contact with us if our 5050 LED strip light can not work or has other problem. Professional SUPERNIGHT team would....
Check Stock

A Drop in the Bucket

  • Only compatible with PS4 Gen 2 controller (CUH ZCT2*, JDM-040/050/055).
  • Check the second picture of the listing before purchase.
  • Custom Clicky flex cable with built-in buttons is specially designed for PS4 controller, which can shorten the trigger distance to 1.5mm and make its speed up shooting.
  • Easy for installation, just to take apart your controller, replace and install.
  • Get an installation video guide on YouTube by searching "eXtremeRate Clicky Trigger Kit for PS4".
  • Package includes customized conductive flex cable, FPC board built-in buttons kit, cross screwdrivers and spare screws. Note: The controller, trigger button and other parts are not included.
  • Kindly note after installing the Clicky hair trigger kit in racing games is always full speed. If you have any problems with this product, please feel free to send us a message.
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • ... Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vision applications demand IMX477 camera. It can also serve for Artificial Intelligence, like facial recognition, high-speed capturing and so on..
Check Stock

Raspberry Pi Camera Module V2-8 Megapixel,1080p (RPI-CAM-V2 + 20"/500mm Flex Cable + Pi Zero Cable)

  • What Will You Get: An 8mp raspberry pi camera V2 with a 15cm original FFC cable, a 50cm FFC cable for model A and B, a 15cm FPC cable for pi zero & w and an acrylic case..
  • Sensor: 8 megapixel Sony IMX219, Max. resolution: 3280 (H) x 2464 (V).
  • Frame Rates: 1080p30, 720p60 and 640x480p90.
  • Recommended Power Supply: DC 5V, above 1.8A.
  • Typical Usage Scenarios: this tiny camera board can be used for monitoring Octoprint 3D Printer, Home security and surveillance, dashcam or other machine vision application. Please search ASIN: B09TNG4V55/B09TKYXZFG to get Raspberry Pi Camera ABS Case and Tripod Case Kit..
Check Stock

SKYRC eFUEL 1200W/50A Regulated Power Supply High Power High Output

  • Over Temperature Protection Over Current Protection hort Circuit Protection Gives you Max Safety.
  • PFC, short for power factor correction, consists of active FPC and negative FPC. Active FPC, which is integrated into SkyRC 1200W/50A regulated power supply, can provide higher power utilization..
  • Active PFC is the use of power electronics to change the waveform of current drawn by a load to improve the power factor, thus achieving the purpose of higher efficiency. It’s capable of correction on AC input voltage and universal on a global basis..
  • Adopting the intelligent Air cooling system, the fan will be initiated automatically when operating temperature reaches 50 degree..
  • Maximum output of the main port is 50A, while each of other three deputy outlets provides up to 10A output with a switch to control respectively. 1200W output with 4 outlets to power your charger, you deserve to have one such power supply..
Check Stock

Cuisinart Dough Blade

  • The Cuisinart DLC-019ATX-1 Dough Blade fits models: MP-14N DFP-14N DFP-14BCN MP-14 DLC-7E DLC-7FPC DLC-7M DLC-7SP PRO14 DLC-7E DLC-7 DLC-7P DLC-7FPC DLC-7SFP DLC-7M DLC-7SP DLC-2014 DFP-14 DFP-14BC DFP-14BCW DLC-2014N DLC-3014 DLC-3014CH CUSTOM14.
Check Stock

Xiaoyztan 40 Pin Flexible Flat Ribbon Cable 0.5mm Pitch FFC FPC for LCD TV Car Audio DVD Player Laptop (200mm Length, Pack of 20Pcs)

  • PACKAGE - 20 x FFC FPC AWM Flexible Flat Cable..
  • DIMENSION - 0.5 mm pitch, 40 pins and 200mm in length, type B..
  • DESIGN - Each end of the cable is reinforced with a stiffener to make insertion easier or to provide strain relief..
  • MATERIAL - Cede territory line, silver paste, aluminum foil, copper foil, silver foil, conductive cloth, acetate cloth, etc..
  • AFTERSALES - Please feel free to let us know if you meet any product quality issue, we will try our best to help you..
Check Stock

Infrared Night Vision IR Camera for Raspberry Pi 4 Pi 3b+ Video Webcam with Case Suits for 3D Printer

  • New design Acrylic holder case make sure your pi camera is more stable and flexible, the case reserve the hole for heat-sink, IR led and screws hole,....
  • Compatible with all series, fit for Raspberry pi 4, Pi 3 B+ with 100cm FFC Camera Cable, and match 30cm FPC Cable for Pi Zero, also can works with....
  • HD resolution, the night vision camera is capable of 2592*1944 pixel static images, and also supports 1080P 30fps, 720P 60fps and 640*480P 60/90fps....
  • Better low light performance, IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lightning condition.
  • Typical usage scenarios, Home security and surveillance, motion detection, 3D printer observe, time-lapse photography and other Raspberry Pi camera....
Check Stock

CY SD to SD Card Extension Cable Standard SD SDHC Memory Card Kit Male to SD Female Extension Soft Flat FPC Cable Extender 25cm

  • Can connect SD card for the Phone Tablet.
  • Can extend SD card slot from inside to outside.
  • Standard SD SDHC Memory Card Kit Male to SD Female Extension Soft Flat FPC Cable.
Check Stock

Yootop 20 Pcs FFC FPC AWM Flexible Flat Calbe 0.5 mm Pitch 32 Pin 200mm Length A Type

  • PACKAGE - 20 x FFC FPC AWM Flexible Flat Calbe..
  • FEATURE - 0.5 mm Pitch 32 Pin 200mm Length Type A..
  • DESIGN - The each end cable is reinforced with a stiffener to make insertion easier or to provide strain relief..
  • MATERIAL - Gold-plated, cede territory line, silver paste, aluminum foil, copper foil, silver foil, conductive cloth, acetate cloth, etc..
  • GUARANTEE - Contact us if you encounter any product problems. We will provide solutions or even refund services for products with quality problems..
Check Stock

digitharbor® Video Door Scope Viewer Build-in 600mAh Lithium Battery+cyclic Storage Digital Peephole viewer Door Camera Door Open Chime 2.4 inches Color 320x420p LCD Screen 0.3MP 90degrees View

  • please be advised, you have to drill a hole on your front door before installation.it is not wireless, and do not support external memory card..
  • Step 1: According to the door thickness to choose a suitable screw, then turn the screw into the screw hole on the barrel of outdoor unit..
  • Step 2: Insert the barrel together with the FPC through the door peephole, then hold the outdoor part on door in right direction..
  • Step 3: Take out the metal bracket (the "UP" arrow on the bracket means upward), the FPC pass through the rectangular hole, the screw pass through the round hole of the metal bracket, then to lock the metal bracket with outdoor part tightly..
  • Step 4: Connect the FPC from outdoor unit to the connector of the indoor unit in right direction.Step 5: The four slots on the back of indoor unit is aligned with four hooks on the metal bracket and buckle up, then pull down indoor unit to lock tightly. Done!.
Check Stock