Top Fpc Display Cable

eXtremeRate Clicky Hair Trigger Kit for Xbox Series X/S Controller LT RT Shoulder Buttons, Custom Flashshot Trigger Stop Flex Cable for Xbox Series X/S, Xbox Core Controller Model 1914

  • Only compatible with Xbox Series X/S, Xbox Core controller (model 1914).
  • Custom Clicky flex cable with built-in bracket is specially designed for Xbox Series X/S controller, which can shorten the LT RT trigger distance to 1.5mm and make its speed up shooting.
  • The installation process requires customer with basic electronic upgrade experience. Clicky FPC boards need to be soldered. Get an installation video guide on YouTube by searching “eXtremeRate Xbox Series X/S Clicky Trigger Kit”.
  • Package includes customized conductive flex cable, FPC board built-in bracket kit, 2 screwdrivers and spare screws. Note: The controller, trigger button and other parts are not included.
  • Kindly note after installing the Xbox Series X/S Clicky hair trigger kit in racing games is always full speed. If you have any problems with this product, please feel free to send us a message.
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip for Bedroom TV Back Lighting Christmas Valentine s Day Black PCB

  • 【Black FPC LED Strip Light】The FPC is black, which is different from most of white FPC strips. Perfect black FPC strip for you to decorate TV,....
  • 【RGB Color Changing Rope Lights】The led chip is SMD 5050, and each LED contains R, G, B, three independent lamp beads. You can use one RGB remote....
  • 【IP65 Waterproof Tape】This 16.4ft length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Low Power Consumption Strip】This rope light works with 12V power adapter, low Power Consumption & environmental. Safe to touch. (DC 12V Power is....
  • 【Best After-Sales Service】Please contact with us if our 5050 LED strip light can not work or has other problem. Professional SUPERNIGHT team would....
Check Stock

A Drop in the Bucket

  • Only compatible with PS4 Gen 2 controller (CUH ZCT2*, JDM-040/050/055).
  • Check the second picture of the listing before purchase.
  • Custom Clicky flex cable with built-in buttons is specially designed for PS4 controller, which can shorten the trigger distance to 1.5mm and make its speed up shooting.
  • Easy for installation, just to take apart your controller, replace and install.
  • Get an installation video guide on YouTube by searching "eXtremeRate Clicky Trigger Kit for PS4".
  • Package includes customized conductive flex cable, FPC board built-in buttons kit, cross screwdrivers and spare screws. Note: The controller, trigger button and other parts are not included.
  • Kindly note after installing the Clicky hair trigger kit in racing games is always full speed. If you have any problems with this product, please feel free to send us a message.
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • ... Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vision applications demand IMX477 camera. It can also serve for Artificial Intelligence, like facial recognition, high-speed capturing and so on..
Check Stock

Raspberry Pi Camera Module V2-8 Megapixel,1080p (RPI-CAM-V2 + 20"/500mm Flex Cable + Pi Zero Cable)

  • What Will You Get: An 8mp raspberry pi camera V2 with a 15cm original FFC cable, a 50cm FFC cable for model A and B, a 15cm FPC cable for pi zero & w and an acrylic case..
  • Sensor: 8 megapixel Sony IMX219, Max. resolution: 3280 (H) x 2464 (V).
  • Frame Rates: 1080p30, 720p60 and 640x480p90.
  • Recommended Power Supply: DC 5V, above 1.8A.
  • Typical Usage Scenarios: this tiny camera board can be used for monitoring Octoprint 3D Printer, Home security and surveillance, dashcam or other machine vision application. Please search ASIN: B09TNG4V55/B09TKYXZFG to get Raspberry Pi Camera ABS Case and Tripod Case Kit..
Check Stock

SKYRC eFUEL 1200W/50A Regulated Power Supply High Power High Output

  • Over Temperature Protection Over Current Protection hort Circuit Protection Gives you Max Safety.
  • PFC, short for power factor correction, consists of active FPC and negative FPC. Active FPC, which is integrated into SkyRC 1200W/50A regulated power supply, can provide higher power utilization..
  • Active PFC is the use of power electronics to change the waveform of current drawn by a load to improve the power factor, thus achieving the purpose of higher efficiency. It’s capable of correction on AC input voltage and universal on a global basis..
  • Adopting the intelligent Air cooling system, the fan will be initiated automatically when operating temperature reaches 50 degree..
  • Maximum output of the main port is 50A, while each of other three deputy outlets provides up to 10A output with a switch to control respectively. 1200W output with 4 outlets to power your charger, you deserve to have one such power supply..
Check Stock

Cuisinart Dough Blade

  • The Cuisinart DLC-019ATX-1 Dough Blade fits models: MP-14N DFP-14N DFP-14BCN MP-14 DLC-7E DLC-7FPC DLC-7M DLC-7SP PRO14 DLC-7E DLC-7 DLC-7P DLC-7FPC DLC-7SFP DLC-7M DLC-7SP DLC-2014 DFP-14 DFP-14BC DFP-14BCW DLC-2014N DLC-3014 DLC-3014CH CUSTOM14.
Check Stock

Xiaoyztan 40 Pin Flexible Flat Ribbon Cable 0.5mm Pitch FFC FPC for LCD TV Car Audio DVD Player Laptop (200mm Length, Pack of 20Pcs)

  • PACKAGE - 20 x FFC FPC AWM Flexible Flat Cable..
  • DIMENSION - 0.5 mm pitch, 40 pins and 200mm in length, type B..
  • DESIGN - Each end of the cable is reinforced with a stiffener to make insertion easier or to provide strain relief..
  • MATERIAL - Cede territory line, silver paste, aluminum foil, copper foil, silver foil, conductive cloth, acetate cloth, etc..
  • AFTERSALES - Please feel free to let us know if you meet any product quality issue, we will try our best to help you..
Check Stock

Treedix 3.5 inch TFT LCD Display 320 x 480 Color Screen Module Compatible with Arduino UNO R3 Mega2560

  • Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor)..
  • Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit..
  • The module display area contains 320x 480pixels..
  • This product accords with RoHS environmental criterion..
  • Compatible with Arduino UNO R3 Mega2560 DUE..
Check Stock

Infrared Night Vision IR Camera for Raspberry Pi 4 Pi 3b+ Video Webcam with Case Suits for 3D Printer

  • New design Acrylic holder case make sure your pi camera is more stable and flexible, the case reserve the hole for heat-sink, IR led and screws hole,....
  • Compatible with all series, fit for Raspberry pi 4, Pi 3 B+ with 100cm FFC Camera Cable, and match 30cm FPC Cable for Pi Zero, also can works with....
  • HD resolution, the night vision camera is capable of 2592*1944 pixel static images, and also supports 1080P 30fps, 720P 60fps and 640*480P 60/90fps....
  • Better low light performance, IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lightning condition.
  • Typical usage scenarios, Home security and surveillance, motion detection, 3D printer observe, time-lapse photography and other Raspberry Pi camera....
Check Stock

CY SD to SD Card Extension Cable Standard SD SDHC Memory Card Kit Male to SD Female Extension Soft Flat FPC Cable Extender 25cm

  • Can connect SD card for the Phone Tablet.
  • Can extend SD card slot from inside to outside.
  • Standard SD SDHC Memory Card Kit Male to SD Female Extension Soft Flat FPC Cable.
Check Stock