Top Free Spool

Embroidex Adjustable Single Thread Spool Holder – Stand Alone Embroidery, Sewing or Quilting Thread Holder or Stand – Ensures Smoother Feed = Heavy Plastic Base

  • ★ UNIVERSAL SPOOL HOLDER – Besides a wide range of spool sizes, this unique spool holder helps you hold even the large conical spools of threads which are otherwise difficult to accommodate in a built-in thread holder and require a lots of hacks like mason jars, etc. – larger spools cost less and offer you more thread compared to standard size spools. This stand, thus, not only makes life more convenient for you but also makes the sewing, embroidery or quilting more cost-effective..
  • ★ BUTTERY FEED – The standalone thread stand or thread spool holder is ideal for machines with horizontal spool holders. It makes thread come out at even pace and smoothly off the spool, thus eliminating any chances of frequent thread breaking or tangling. This is one of the best solutions for cross-wound cones which unfold or unwind over the top of the cone..
  • ★ SMART DESIGN – There is a central pin for holding the spool which is capable enough to hold very big sizes of spools too. The thread from the spool is threaded through the hook at the end of the tall vertical guide and then it can be normally threaded through the machine as usual. The tall guide bar ensures that the thread feeds from a point which is higher than your machine to make the feed u....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Black

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Purple

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Black

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Orange

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Green

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Blue

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Hydraulic Valve 2 Spool, Hydraulic Directional Control Valve, 11GPM Hydraulic Joystick Control Valve for Tractors Loaders, Double Acting Cylinder Spool

  • Hydraulic directional control valve comes with 2 spool and #8 BSPP in/out ports, and the 2 spool hydraulic joystick fits for small tractors, tractors loaders, log splitters, and so on..
  • Hydraulic control valve 2 spool for operating double acting cylinders. Durable cast iron construction provides long-term usage..
  • The hydraulic valve 2 spool, hydraulic control valve for tractor loader, all spools standard come with spring return, which can return to the neutral position..
  • The hydraulic spool control valve's relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM. The hydraulic valve 2 spool replacement for hydraulic control valve 2 spool, hydraulic directional control valve, hydraulic spool control valve, joystick hydraulic valve, 2 spool hydraulic joystick, hydraulic control valve for tractor loader, hydraulic joystick control, hydraulic loader valve joystick, hydraulic loader control valve joystick..
  • You will get 1pcs 2 spool hydraulic control valve. We provide the best after-sales service, if you have any questions, please feel free to contact us, we are happy to serve you..
Check Stock

0.065" String Trimmer Replacement for Ryobi AC14RL3A with 522994001 Weed Eater Spool Cap Cover for Ryobi One 18V, 24V, 40V Cordless Trimmers(10 Spool + 3 Cap)

  • ✧String Trimmer Replacement Spool Line➲0.065 String Trimmer Spool Line for AC14RL3A grass trimmer garden tool,Cordless Trimmers Models: 18V, 24V, 40V like:RY40200,RY40021 String Trimmer / Edger,RY24200 24 Volt String Trimmer,RY24021 Cordless 24V Trimmer Edger,P2002 Cordless String Trimmer,P2003 P2004 P2006 18V String Trimmer,P2005 String Trimmer/Edger..
  • ✧Weed Eater String Spool Line and Cap Combo Set➲Specification:Color: Line Blue+Black Spool.
  • Material: Sturdy ABS Plastic Spool+Durable Copolymer Nylon Resin and Synthetic Trimmer/Edger Line. Wire spool Diameter:0.065 Inch. Replacement Line Length:11ft. Grey 522994001 String Trimmer Replacement Spool Cap..
  • ✧522994001 Spool Cover➲522994001 Strimmer Line Cap Cover Fits for P2000 P2001 P2002 AC14HCA. Spool Cap 522994001 holds the spool with line into the string head assembly. Easy to install simply press on the two tabs that lock it into the string head and remove it then snapped it on the bottom of trimmer spool. Line Trimmer Spool Cap 522994001 Replaces Part #: 993373001, AC14HCA, 3411546-7G, HM3411546BG, 341156AG, 3411546CG and 3411546BG..
  • ✧What’s in the package?➲You will receive:10 Pack of AC14RL3A 0.065” line String Trimmer Replacement Spool line and 3 Pack of Line Trimmer Spool Cap 5....
Check Stock

X Home WA0010 Weed Eater String Compatible with Worx Select Electric String Trimmers, 10 Spools & 2 Caps

  • WA0037 Replacement Spool Cap Cover Compatible with Worx WG184 WG190 WG191 WG168 automatic feed string trimmers..
  • WA0037 Spool Cap, Grass Trimmer Spool Cap Cover for WORX made of high quality ABS, durable for use. Color:Black..
  • WA0037 Replacement Spool cap for WORX protects trimmer line fixed spool, prevent weeds from getting stuck inside, avoid damage to the trimmer..
  • WA0037 replacement grass trimmer spool cap cover is for use on 40-volt models WG168 weed and grass trimmers, WG184 weed eater parts, WG190 string trimmer parts, WG190 string trimmer parts.WA0037 Replacement Cap works with WA0014 Trimmer Spool for Worx replacement parts..
  • Easy to install , No tools needed to install, Snaps in place over spool line. Feel free to contact us if you have any problems..
Check Stock

0.065" String Trimmer Replacement Compatible with Ryobi AC14RL3A with 522994001 Weed Eater Spool Cap Cover fit for Ryobi One 18V, 24V, 40V Cordless Trimmers(15 Spool + 3 Cap)

  • ✧String Trimmer Replacement Spool Line➲0.065 String Trimmer Spool Line for AC14RL3A grass trimmer garden tool,Cordless Trimmers Models: 18V, 24V, 40V like:RY40200,RY40021 String Trimmer / Edger,RY24200 24 Volt String Trimmer,RY24021 Cordless 24V Trimmer Edger,P2002 Cordless String Trimmer,P2003 P2004 P2006 18V String Trimmer,P2005 String Trimmer/Edger..
  • ✧Weed Eater String Spool Line and Cap Combo Set➲Specification:Color: Line Blue+Black Spool.
  • Material: Sturdy ABS Plastic Spool+Durable Copolymer Nylon Resin and Synthetic Trimmer/Edger Line. Wire spool Diameter:0.065 Inch. Replacement Line Length:11ft. Grey 522994001 String Trimmer Replacement Spool Cap..
  • ✧522994001 Spool Cover➲522994001 Strimmer Line Cap Cover Fits for P2000 P2001 P2002 AC14HCA. Spool Cap 522994001 holds the spool with line into the string head assembly. Easy to install simply press on the two tabs that lock it into the string head and remove it then snapped it on the bottom of trimmer spool. Line Trimmer Spool Cap 522994001 Replaces Part #: 993373001, AC14HCA, 3411546-7G, HM3411546BG, 341156AG, 3411546CG and 3411546BG..
  • ✧What’s in the package?➲You will receive:15 Pack of AC14RL3A 0.065” line String Trimmer Replacement Spool line and 3 Pack of Line Trimmer Spool Cap 5....
Check Stock

KAKO String Trimmer Spool Line 10ft 0.065' Compatible with Worx WA0010 WA0004 WG151 WG154 WG155 WG160 WG163 WG175 WG180 Electric String Trimmer/Edger Weed Eater(12 Spools + 2 Caps)

  • [ Compatible with Worx trimmer spools ]: WA0010 trimmer spool line for worx compatible with original spools models WA0010 WA0004 and cap covers models WA6531 GT. Compatible with Worx string trimmer/edger weed eater models: WG150, WG151, WG151.5, WG152, WG153, WG154, WG155, WG155.5, WG156, WG157, WG160, WG160.1, WG160.2, WG163, WG165, WG175, WG180 electric string trimmer/edger weed eater..
  • [ WA0010 Spool Specification ]: WA0010 spool for worx trimmer replacement spool, 10ft 0.065 inches--each spool is pre-wound with a 10-foot, 0.065-inch diameter, high-strength, durable nylon thread..
  • [ High Quality Material WA0010 Spool Line ]: High-quality ABS spool and Durable nylon string,sturdy enough,strong enough for long working life.for worx trimmer replacement spools by the CNC machine cutting and winding, automatic line change..
  • [ Replacement for Worx Parts ]: wa0010 weed eater spool replacement spool for worx parts, replacement spool for worx trimmer, for worx trimmer replacement spools, for worx replacement spools, for worx edger trimmer line, for worx wa0010 spool, for worx wa0010 replacement spools, for worx wa0004 replacement spools, for worx replacement spool wa0004, wa0004 replacement spools wa0010 trimmer string, wa0010 spool cap cover, trimmer line wa....
Check Stock