Top Fuel Injection Hose Clamps

Hoshizaki 427443-05 Hose Clamp

  • 【NO EDGES OF SHARPNESS】-- These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • 【PREVENT FLUID LEAKAGE】-- Item Type: Hose clamp. Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
  • 【VERY TIGHT HOSE CLAMPS】-- Carbon steel color zinc plating. These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • 【HIGH QUALITY CARBON STEEL】-- Type: Elastic hose clamp. Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • 【EASILY ADJUSTED BY SCREWDRIVER】-- Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

Attwood 93038AI7 Primer Bulb for 3.8 inch ID Fuel Line - Not for use in The U.S.A

  • Fuel line primer bulb is alcohol resistant and suitable for use with leaded or non-leaded fuels. (NOT FOR USE in U.S.A).
  • Double check valve assures correct fuel flow direction and unrestricted flow..
  • Barb end fuel hose connectors included and attached with stainless steel hose clamps..
  • Easy to replace old primer bulbs with common tools. Hose clamps for fuel line on barb connectors required..
  • Check primer bulb and fuel line periodically for leaks, wear or loss of flexibility. Replace as needed..
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

IZOKEE 1/4\ Inch ID Fuel Line Set - 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine

  • 【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line.
  • 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!.
  • 【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications..
  • 【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power..
  • 【Hose Clamps】Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage..
  • 【Wide Application】Fits selected Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect..
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

KIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

  • ...sistant nitrile tube with a covering that resists weathering, ozone ,heat and can be used for ethanol-laced fuels and diesel fuel. This fuel hose is SAE 30R9-rated that will withstand up to 120 psi and 300 degrees..
  • Fitment: includes 6 Feet 5/16" Fuel Line.
  • 4Pcs x 1/4 Inch & 5/16 Inch Fuel Filters.
  • 20 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. They could be used widely for update your fuel line system, such as outboard boat system, motorcycles, ATVs, UTVs, Go Kart, Auto Vehicle's. Fuel line kit could also be used widely on lawnmower, Generator, power equipment and small engines Tool Etc..
  • Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
  • Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage, make your fuel line mounting all the safe..
  • Super Pressure rating and permeability. Each KIPA Fuel Line sections are strictly tested to ensure the durable safe and reliable use. KIPA fuel line reduce permeability we will save mo....
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

100Pcs 6 22mm Hose Clamp Set Spring Hose Clamp for Pipes Tubes

  • Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
  • These gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
Check Stock

WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps

  • Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock