Top Fuel Pressure Regulators

SÜA Oxygen Regulator Welding Gas Gauges

  • CGA-540 Inlet Fitting, (Connection to Tank).
  • 9/16" - 18 RH Type B-B Outlet Fitting, (Connection to Hose).
  • Max Inlet Pressure: 3000 psi - Delivery Pressure Range: 0-145 psi.
  • Medium to Heavy Duty Regulators - Body: Forged brass, Bonnet: Powder Coated, UV resistant Code Color Composite Knob.
  • ***READ THIS BEFORE YOU BUY*** Please check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses..
Check Stock

2 Piece Dual Welding Gas Gauges Oxygen (CGA-540) and Acetylene (CGA-510) Regulators Combo

  • Replacement Oxygen & Acetylene Regulators.
  • Oxygen Outlet Pressure: 0-200 PSI | Acetylene Outlet Pressure: 0-30 PSI.
  • Please check the item specifications carefully before buying, and make sure that these Regulators fit your Tanks and Hoses..
Check Stock

DOZYANT Propane Tank Y Splitter Adapter Gauge, Propane 2 Way LP Gas Adapter Tee Connector Adapter for 5lb to 40lb Propane Tank Cylinder, Universal for Gas Grill, RV Camper, More Appliances

  • For 5 pound - 40 pound propane tanks. This propane splitter adapter connects two regulators to one propane tank. Allows you to easily run two propane appliances on one tank, No need for two fuel tanks, Only have to use Y-splitter and attach to fuel in order to connect fuel to two grills or burners..
  • Monitors fuel level without removing the tank. Color coded dial for allowing you to see at a glance when your propane level is low.Gauge display accounts for ambient temperature change. Color coded dial for allowing you to see at a glance when your propane level is low..
  • The two outlets of the propane splitter are equipped with shut-off valves. If the interface is not connected or the connection is wrong, there will be no gas overflow to avoid gas leakage. High quality 100% solid brass. Solid Brass for durability and reliability, Is extremely long lasting, Will be good for many uses and it is sturdy. Allows for additional appliance to be hooked up..
  • Acme (QCC1) connector with 2 male pipe thread. Our splitter adapter has a check valve so it can be used with only one hose connected upon you need..
Check Stock

Sewtanc Vacuum Block Intake,Aluminum 6 Port Vacuum Block Intake Manifold Kit,Wastegate Turbo Boost,Fuel Wastegate Turbo Boost 3/8in Inlet Outlet 1/8NPT,for Racing

  • ...g extra ports if needed, great for hooking up Pressurized controls, gauges and any components that require a separate vacuum source. You can also use tape for fuel and oil requirements..
  • 【Excellent Aftermarket Replacement】Includes 6X 1/8NPT Aluminum Fitting Ports for Boost Controllers, Map Sensors, Fuel Pressure Regulators, Boosters, Exhaust Valves and any other fuel/ignition that requires a vacuum source management components.
  • 【Additional Vacuum Source Required】A billet vacuum manifold is a great add-on tuner, and the design of supercharged cars and single throttle bodies requires multiple vacuum sources. Turbo vacuum ports for automotive vacuum block intake manifolds.
  • [After-sales guarantee] After you receive the product, if the product is damaged, lost, unusable or any other questions, please feel free to contact our customer service, we can refund you or resend new products to bring you more satisfaction shopping experience.
Check Stock

SHONAN 2.5 Inch Swivel Snap Hooks, 5 Pack Small Stainless Steel Spring Clips, Flag Pole Clips, Scuba Diving Clips Spring Hooks for Dog leashes, Keychains, Bird Feeders, Pet Chains and More

  • Package included 2pcs black diving hose clamps..
  • Very suitable for fixing low pressure/high pressure hoses, regulators and meters..
  • The bracket is made of high-quality plastic, and the arm of the diving hose clamp is made of stainless steel, which is wear-resistant and not easy to rust..
  • The diving hose clamp adopts 360-degree rotatable buckle and easy buckle design, which is very convenient for installation and disassembly..
  • Commonly used in low or high pressure hoses, regulators, diving watches and instruments..
Check Stock

Water Pressure Regulator Valve for Travel Trail Lead Free 3/4" Pressure Regulator Valve Rv Water Pressure Regulator Brass Adjustable with Gauge and Inlet Screened Filter

  • ...re regulator valve,compatible with all U.S. water sources, including 3/4″ garden hose threads and NH threads,bring you continuous water flow and will not reduced the water flow rate..
  • ★【Adjustable Water Pressure Regulator】 – Adjustable from 0- 160 PSI.You can protect your plumbing systerm with our regulators.Adjust screw on the top of regulator to select your desire pressure setting.Suitable for drinking/potable water.Preset at 45PSI.Working temperature:28℉-176℉.Never had it frozen to protect the gauge..
  • ★【Water Pressure Regulator for Travel trailer】 – With regulator gauge can clearly see the water pressure.Regulator gauge contains oil to reduce friction of internal components and greatly increases the life of the RV EQUIPMENT..
  • ★【Camper Pressure Regulator for Easy Installation】- There is installation guide shipped together with the pressure regulator,which means it is easy for you to install the water pressure regulators..
  • ★【Water Pressure Regulator With 2 Years Warranty】 – Using the solid lead free brass, You can reply on our service of 2 years warranty. Each of our Valve have passed the factory inspection before it arrive your home.If you have the slightest problem with your product, give us a me....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Victor Technologies 0384-2691 Medalist 350 System Heavy Duty Cutting System, Acetylene Gas Service, G350-15-300 Fuel Gas Regulator

  • Gas Service: Acetylene, Oxygen Regulators: G350-150-540, Fuel Gas Regulator: G350-15-300.
  • Welding Nozzle: 2-UM-350.Maximum Cutting: 8 inches.Maximum Welding: 3 inches.
  • CA411-1 Cutting Attachment.Cuts up to 3/8" / 12.7mm 6" / 76.2mm with optional tips.
  • industries-Industrial and general fabrication, light fabrication, repair and maintenance,structural steel fabricationDescriptionThis heavy/medium duty system cuts up to 3/4" (19.1 mm) or 6" (152.4 mm) with optional tips. It welds up to 1/8" (3.2 mm) or 3" (76.2 mm) with optional nozzles. Includes: Heavy duty construction.
  • WH411C torch handle with built-in check valves.
Check Stock

ZENY NEW Portable Gas Welding Cutting Torch Kit w/Hose, Oxy Acetylene Brazing Professional Set with Case

  • Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional.
  • High-capacity Oxygen and Acetylene regulators, with a full 2 1/2" diam. for optimal performance..
  • Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
  • Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0).
  • The whole Kit is constructed of stainless steel and brass for durability. Suitable For Home And Business Applications,Packed in ABS case, Lighter weight, easy to carry.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

Milton 1114 3/8\ NPT Regulator

  • FRL Air Regulators: Prevent overdriving tools and have adjustable pressure..
  • Durable cast aluminum body to resist corrosion. INCLUDES mounting bracket..
  • Dial gauge pressure range: (0 to 160 PSI, 0 to 1.1 MPa). Locking adjustable knob to set/maintain consistent pressure. Ranges: 5-125 PSI..
  • 1/4" inch national pipe threads on both inlet/outlet. Gauge thread (gauge included): 1/8" center mount..
  • Max Air Flow: 20 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check Stock

Taprite Primary Keg Brass Beer Regulator With Commercial Pressure Gauge (Dual Gauge 742HPN)

  • Use this regulator on any High Pressure Tank with a CGA-580 valve..
  • Nitrogen tanks have a female thread (CGA-580), these regulators have a male thread..
  • Double Gauge Regulators Measure PSI, as well as the Volume of Nitrogen in the Cylinder..
  • This regulator has a duck-bill check valve which prevents back flow of liquid into the regulator..
  • 1P1P, CGA580 Inlet, 5/16″ Barb Shutoff w/Duckbill Check, 60lb & 3000lb gauges.
Check Stock