Top Fuel Sender Float

Rupse Fuel Sender Unit Boat Fuel Tank Sending Unit Fuel Water Level Sensor Stainless Steel Fuel Sender and Fuel Gauge for Boat Car Truck RV (6' (150mm))

  • [High Precision and Long Life]: The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc..
  • [Easy to Read]: The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read (Empty-1/2-Full)..
  • [Easy Installation]: SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram..
  • [Multi-Size]: Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment..
  • Note: To allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal ..
Check Stock

Walker Products 151039A Carburetor Kit

  • 100% OEM style components insure proper fit and assist with easy rebuilding of the fuel system as all parts match the original OEM components.
  • High quality coated gaskets insure a proper seal and resist today’s volatile fuel mixtures in the marketplace.
  • Easy to read instructions insure a quick and easy installation with step by step rebuilding instructions including pictures.
  • Walker fuel system repair kit includes all installation accessories including OE style clip rivets, float gauge and float specification kit.
Check Stock

WISPAUSU 6599 Fuel Tank Lock Ring Wrench Tool Compatible with Ford Chrysler Dodge GM Vehicles Universal Fuel Pump Lock-ring Removal Tool Fuel Sender Tank Lid Remover

  • Suitable for Ford Chrysler and GM vehicles' fuel tank lock rings. Please check the ring size before purchase..
  • The 6599 fuel tank lock ring wrench tool can help you change your fuel sender, remove the ring effectively without damage. To repair your fuel....
  • Compatible with 2004-newer Ford F-150 trucks, 2004-newer Chrysler/Dodge mini-vans PT Cruiser Dakota Durango, 2004-newer Chevy 1/2-ton 3/4-ton trucks,....
  • The fuel pump lock ring removal tool should use with your 1/2" drive ratchet or breaker bar. Take off or install the lock ring easily. The year of....
  • Born for heavy duty jobs and made of high-carbon steel. We offer 1 year after-sales service. Your order will get fast delivery by FBA..
Check Stock

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

OTC 6556 Fuel Sender Lock Ring Wrench

  • Safely remove the newly-designed 4-1/2" fuel sender lock ring on 2003 - 2011 Cadillac CTS, SRX and STS models.
  • Allows high torque to loosen and tighten lock rings that require a specialized tool for service.
  • Standard 3/8 inch square center drive hole for balance and maximum force available to remove and tighten.
Check Stock

Frienda 3 Pieces Universal Fuel Pump Removal Tools Adjustable Fuel Pump Lock Ring Adjustable Lock Ring Spanner Fuel Pump Module Spanner Wrench Fuel Tank Lid Cover Remove Spanner

  • Durable texture: our fuel pump removal tools are made of quality chrome-vanadium steel material, sturdy and durable, not easy to corrode, rust, deform and break, can serve you for a long time.
  • Proper dimension: the adjustable lock ring spanner with two claws are adjustable from 3/8 inch to 1/2 inch (38mm to 168mm) ratchet drives, the fuel pump module spanner with three claws is adjustable from 135mm to 185mm, enough to meet your daily need.
  • Humanized design: these oil pump cap cover has large adjustment range which is suitable for different oil pump caps, will meet your different need and effectively help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings.
  • Nice repair tool: the curved foot design makes fuel tank lid cover remover spanners more suitable for the oil pump cover mounting surface to ensure that it is not easy to slip during operation, save your time and effort.
  • Fit most situation: these adjustable fuel pump lock ring tool are suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank, suitable for most car tank caps.
Check Stock

240-33 ohms 4' (100mm) Fuel Tank Sending Unit for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor

  • Wide Range of Application: The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges.
  • Simple Installation: The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative.
  • Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should be 1inch less than the depth of the tank.
Check Stock

Autolite 1100 1101 1 Barrel Carburetor Replacement for 200” 3.3L 6 Cylinder Engine 1963-1967 Mustang Fairlane Falcon Mercury Van Truck

  • Compatible: 144” 2.4L, 170” 2.8L, 200” 3.3L 6 cylinder engine..
  • Fitment: Perfect fits for 1963-1964 Van, Truck. 1963-1967 Mustang, Fairlane, Falcon, Mercury..
  • Choke Type: Manual Choke ( Hand Choke ), and Spark Control Valve..
  • Package Include: 1 x carburetor, 1 x fuel filter, 1 x gasket, 1 x fuel line, and other accessory..
  • Notice: After installation, if gasoline leaks from the vent of the fuel cup, the reason is the carburetor float level is too high, just remove the carburetor and reduce the float level..
Check Stock

6599 Fuel Tank Lock Ring Tool Fuel Pump Senders Removal Install Tools for Chrsyler Dodge Ford GM Nissan Hyundai Sante Fe Jeep Wrangler

  • FITMENT VEHICLE-- Fits for Dodge Ram 1500 2500 3500 4500.
  • for Chevy Silverado Malibu Maxx Colorado Avalanche.
  • Trailblazer Camaro SS for Hyundai Elantra Tuscan Sonata.
  • FOR AUTO MODELS-- For 2005 Mercury Montego.
  • EASY TO USE-- Used with a 1/2" drive ratchet or breaker bar. Easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit..
  • A MUST HAVE TOOL-- Using a hammer and screwdriver to loosen the locking ring would be history! This tank lock ring tool will help tackle the job of replacing the fuel sender FAST and EFFECTIVE without damaging the rings..
  • 100% SATISFACTION GUARANTEE-- Superior 42CrMo steel material with black Oxide finish resisting rust and corrosion. If you're not 100% satisfied with our tool, simply return it for a full refund in 30 days. Premium Support & 12 Months Warranty..
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine

  • ... Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions..
Check Stock

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

  • MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
  • Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
  • Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
  • One-year Limited Warranty & Free Lifetime Technical Support.
Check Stock

5 Gauge Speedometer Set, Digital Gauge Cluster, Black Face, 3-3/8, Mechanical Speedometer

  • This complete gauge kit includes the necessary tubing, adapters, and fuel level sender to install it into nearly any vehicle.
  • Black face with stainless bezel delivers a classy seamless look.
  • 3-3/8" speedometer and 2-1/16" component gauges fit a variety of dash inserts and bezels.
  • Speedometer has 5/8"-18 connection for a speedometer cable (cable is sold separately).
  • All five gauges are perimeter lit with white lighting to ensure visibility at night.
Check Stock