Top Fuel System Rejuvenator

Hot Shot's Secret Gasoline Extreme Bottle, Orange, 16 Ounces, (GE16Z)

  • Cleans Fuel System – Deeply cleans, lubricates, and protects any gasoline fuel system and engine including valves, pumps, injectors, rings, pistons, and upper cylinders.
  • Increases Fuel Economy – Boosts MPG by up to 7.9% after the fuel system is fully cleaned by providing an effective boost in combustion, fuel economy, and engine power.
  • Fixes Issues – Resolves several symptoms of a rough-running engines in one treatment, including poor fuel economy, rough idling, clogged fuel injectors, and loss of engine power.
  • Stabilizes Fuel – Works to prevent ethanol fuels from breaking down quickly or going bad during storage, by stabilizing the ethanol and keeping the fuel fresh.
  • Restores Performance – A powerful P.EA. based cleaner deeply cleans to restore engine power while also working to dissolve gum and varnish, and remove combustion chamber deposits.
Check Stock

Hot Shot's Secret EDT+ Winter Defense - 16 Oz Squeeze, 7-in-1 Anti-Gel Fuel Booster – Winter Diesel Fuel Treatment - Boosts Cetane – Adds Lubricity - Protects Fuel System

  • Prevents Gelling - Minimizes the size of wax crystals that form in diesel fuel during cold weather, so it can still travel through the fuel system, even at temperatures 20°F below the wax solidification point..
  • Improves Cold Starts - Makes it easier for your engine to start even in subzero temperatures, by acting as a cetane booster and fuel system protector..
  • Increases Diesel Lubricity - Works as a fuel stabilizer and fuel injector cleaner to ensure that your fuel system is protected, lubricated, and operating at its best..
  • Improves Fuel Economy – Boosts cetane up to 7 points to improve fuel combustion and reduce DPF Regeneration cycles, keeping your vehicle operating at peak performance..
  • Disperses Moisture – Keeps rust and corrosion from harming your fuel system, while also preventing ice and fuel line freeze-ups even in temperatures as low as -40°F..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 350-1400 psi High Pressure & Tamper Resistant (8.71mm ID)

  • ...r to enhance flexibility and give a cool racing appearance..
  • ✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect...
  • ✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..
  • ✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..
  • ✅FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines wil....
Check Stock

Liqui Moly (2002-20PK) Super Diesel Additive - 300 ml, (Pack of 20)

  • Fuel system cleaner for diesel cleans injector tips, cylinders, fuel lines and tank and dispenses moisture.
  • Boosts cetane up to 7 PTS to provide maximum performance while cleaning your diesel's fuel system.
  • Restores throttle and contains the most concentrated detergent formula on the market.
  • Fuel system cleaner improves cold starting and effectively eliminates black smoke.
  • Increases fuel mileage and enhances lubricity.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ...t, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us d....
Check Stock

Atima Generator Accessories – Extended Run Dual Fuel System Extender Kit for Honda Generator

  • [Function]: ATIMA Dual Fuel System Extender Kit can power two generators simultaneously. It is very easy & convenient to use. Just connect the pipes, combo kit gas cap tube and attach them to a Honda Generator or any other compatible generators. The generator then can intake the fuel from the external tank and it can extend the operation time..
  • [Composition]: This kit includes one long fuel pipe with automatic lock.
  • two short fuel pipes connected to the fuel tank cap and two fuel tank caps. The tight fitting of the fuel pipe prevents oil leakage..
  • [Advantage]:1: Run honda generator fuel extender System Each fuel pipe interface is a quick interface, so it is very convenient to connect .2: When using our products, the generator ,fuel tank and leather pipe are directly connected, not twisted, reducing the distortion of the leather tube and increasing the service life..
  • [Thread fit] :The fuel tank cap thread is tightly coupled with the generator thread, and the rubber gasket is squeezed with the generator port to form a seal to prevent air from entering..
  • [Tips]：The users should buy another tank with Thread outlet to connect this system , like attwood 8806LPG2S Epa Certified Portable Fuel Tank.The model number of the generator must match the model of the f....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

Rislone Hy-per Fuel Complete Fuel System Cleaner Gas

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

Hot Shot's Secret Diesel Extreme - 1 Gallon - Diesel Fuel Additive - Concentrated Fuel Injector Cleaner - Cetane Booster - Increases Mileage - Eliminates Black Smoke

  • Cleans Fuel System – Deeply cleans any diesel engine’s fuel system including injectors, cylinders, fuel lines, tank, and tank in one fuel treatment lasting up to 6,000 miles.
  • Cleans Fuel Injectors – Safely removes and prevents Internal Diesel Injector Deposits (IDIDs), External Diesel Injector Deposits (EDID’s) and other forms of varnish and deposits.
  • Boosts Cetane – Increases cetane by up to 7 points after the fuel system is fully cleaned, for an even more effective boost in combustion, fuel economy, and engine power while reducing DPF regens.
  • Increases Mileage – Maximizes your MPG's and helps you save at the pump by improving engine performance and fuel combustion, so you can get the most out of your diesel fuel.
  • Stabilizes and Prevents Rust, Disperses Moisture – Keeps diesel “healthy” using a military grade non-alcohol-based water dispersant plus rust and corrosion inhibitors.
Check Stock