Top Fuel Tank Elbow
1/4 Quarter Turn Aluminum Non Locking Diesel Fuel Cap for 3 Inch Semi Truck Fuel Tank Locking Gas Cap Fit for Freightliner Cascadia Columbia Century Coronado M2 Replace 03-37017-000 S2136
- Compatible Models: Non locking diesel fuel cap fit for Freightliner Cascadia 108SD Argosy Century Columbia Coronado M2 112 114SD 122SD. Please pull down to view the specific adaptation.
- Replacement Part Number: Replace 3-37017-000 S21361, 600148, 0337017000, 337017000. The inner diameter of the fuel tank cap is 3.5", the outer diameter of your fuel filler should be 3", Please measure the outer diameter of your fuel tank fill tube prior to ordering.
- High-quality Material: The fuel gas cap is made of high-quality die-cast aluminum alloy, which is not easy to corrode and oxidize. The fuel tank cap is equipped with a rubber sealing ring, safety chains and rings, which will not leak after installation. Semi-trailer diesel fuel tank only, ventilated, 220°F heat release, longer life.
- Anti-theft and Anti-leakage: The non locking diesel fuel cover has a high-quality lock cylinder to prevent diesel theft. 8 inch chain and 6.5 inch steel retention wire to prevent loss of fuel cap.
- Products Include: 1 x fuel tank cap, inside the cap there are rubber seals, safety chains, lifting rings. When installing, please clean the fuel port part, pay attention to cover the fuel tank port to prevent impurities from entering the fuel tank, and then tighten the fuel tank cap....
Check StockSealed Power 224-51198 Oil Pump Repair Kit
- Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
- This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
- A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
- Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. (use with a 1/2" drive ratchet or breaker bar).
- Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock2L Replacement Gas Fuel Petrol Tank For 49cc 60cc 80cc Motorized Bicycle Bike by WENBIAO
- 2L Fuel Tank W/Cap Petcock Set Fit: 49cc 66cc 80cc Motorized Bicycle Bike.
- 2L Fuel Tank W/Cap Petcock Set Package Include:1 x Fuel Gas Tank 1 x Fuel Tank Cap 1 x Fuel Tank Switch Valve 2 x Fixed plate 4 x Nut.
- Fuel Tank W/Cap Petcock Set Capacity: 2L,Externally threaded tank & petcock makes it easier and faster to replace the old petcock..
- 49cc 60cc 66cc 80cc 2 Stroke Engine Motorized Bicycle Bike.
- Replacement for original part.Please check part comparibility to see if it fits your model..
Check StockArctic Cat 2001-2002 Carb Keihin Cvk 34 0470-449 New Oem
- This product can replace the clumsy fuel tank breathing hose, contains an internal float, and can be used as a one-way valve. Air can enter the fuel tank while preventing gas and smoke from escaping..
- beautiful appearance, convenient and simple to use..
- This product can protect your air tank from being filled with dust, debris and debris when using off-road motorcycles under normal circumstances, and can prevent air from entering..
- Function: Fuel cap and fuel tank vent pipe hose is suitable for off-road motorcycle ATV, all factories XR, CRF..
Check StockGREHUA Upgrade Gas Fuel Tank with Fuel Level Gauge for Predator 212cc 196cc 6.5hp GX160 GX200 Baja Warrior MB165 MB200 Coleman CT200U BT200X KT196 Hammerhead 80T Go Kart Engine Mini Bike Parts Black
- FITMENT—fit for go kart engine mini bike generator powered by non hemi predator 212cc 196cc 6.5hp performance parts powerhorse GX160 GX200 Hammerhead 80T Baja Warrior MB165 MB200 Coleman CT200U BT200X KT196..
- HIGH MATERIAL—the fuel tank is made of high quality metal material and durable for a long time use.Built under strict standard control, ensure the fuel tank have most reliable performance.Fuel Tank Capacity:3L/0.8 gallons.
- DESIGN UPGRADE HIGH PERFORMANCE—upgrade threaded design of fuel tank cap to prevent fuel tank leakage,it is more easier to install.In addition, with the amount of fuel gauge, you can observe the amount of fuel in the tank at any time. And you can add fuel in time to prevent no fuel when riding..
- PACKAGE INCLUDED—1 x gas tank assembly, 1 x gas cap, 1 x spark plug, 1 x screw, 1 x fuel line, 2 x clip, 2 x nut, 1 x wrench,1 x collar,1x In-Tank Filter,1 x Valve petcock.,1x Fuel line Tube.
- NOTE—please check as much as possible to the item picture, model and size carefully before purchasing.Or leave us messages for assistance if you're not sure if ....
Check StockPortable Boat Fuel Tank 24L 6 Gallon Marine Outboard Motor - Fuel Tank with Hose Connector Portable Fueling Tank Plastic Tank, Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes- Red
- ⛵Features - There is a nut with its own air exhaust, which can minimize leakage, There is also a filter in the fuel tank to filter out debris.
- ⛵Convenient to Carry and Place - The outboard motor fuel tank equipped with an I-shaped lifting handle, which is more ergonomic, easy to carry and store,rust protection, durable, beautiful, easy to use handle design, light weight and portable, convenient to place and carry..
- ⛵Compatible With - This outboard motor fuel tank kit is a full assembly, it includes 1pcs fuel tank , 1pcs boat fuel line hose, 2 pcs of ends fuel connectors fittings and 1pcs primer bulb.boat fuel tank large capacity- 6 gallon (24L),diameter of tank opening is 1-1/2in, this is an outboard fuel tank that can be used for many types of outboard engines. It's perfect for small/large boats, inflatable boats and kayaks..
- ⛵Material - 17.7 x 11.8 x 10.4 in. Large-capacity: 6 gallon (24L), Boat fuel tank is made of high-density polyethylene as the base material,anti-aging, impact resistance, corrosion resistance . It can naturally rebound without permanent deformation after encountering an impact..
- ⛵Warranty - If the received product is deformed or beat up please contact us by message, we will provide warranty service for damaged produ....
Check StockPortable Boat Fuel Tank 12L 3 Gallon Marine Outboard Motor - Fuel Tank with Hose Connector Portable Fueling Tank Plastic Tank, Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes- Red
- ⛵Features - There is a nut with its own air exhaust, which can minimize leakage, There is also a filter in the fuel tank to filter out debris.
- ⛵Convenient to Carry and Place - The outboard motor fuel tank equipped with an I-shaped lifting handle, which is more ergonomic, easy to carry and store,rust protection, durable, beautiful, easy to use handle design, light weight and portable, convenient to place and carry..
- ⛵Compatible With - This outboard motor fuel tank kit is a full assembly, it includes 1pcs fuel tank , 1pcs boat fuel line hose, 2 pcs of ends fuel connectors fittings and 1pcs primer bulb.boat fuel tank large capacity- 3 gallon (12L),diameter of tank opening is 1-1/2in, this is an outboard fuel tank that can be used for many types of outboard engines. It's perfect for small/large boats, inflatable boats and kayaks..
- ⛵Material - 14.1 x 10.2 x 7.87 in. Large-capacity: 3 gallon (12L), Boat fuel tank is made of high-density polyethylene as the base material,anti-aging, impact resistance, corrosion resistance . It can naturally rebound without permanent deformation after encountering an impact..
- ⛵Warranty - If the received product is deformed or beat up please contact us by message, we will provide warranty service for damaged produ....
Check StockPortable Boat Fuel Tank, 6gal - 24L Outboard Marine Portable Fueling Tank with Hose Connector Replacement for Marine Outboard Motor Plastic Fuel Tank
- The 6.3-gallon marine fuel tank is made of high-density polyethylene, which is anti-aging, impact-resistant and corrosion-resistant. It can bounce back naturally after an impact without permanent deformation..
- Two Modes of Sealing and Venting-There are two designs of fuel tank cap, which can be sealed or vented, and the metal nut can be vented and safe to use(High-quality spring designed for deflation, Unscrew the yellow metal nut to release the air in the fuel tank. Tighten the yellow metal nut and the oil tank is airtight), which helps to form a smooth fuel flow, thereby minimizing leakage..
- With An Oil Volume Indicator- Helps you to clearly understand the changes in the oil tank and the remaining oil volume and replenish it in time. A filter is built into the air inlet of the fuel tank to ensure clean fuel..
- Equipped with I-shaped handle, more ergonomic, easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry..
- Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings and 1....
Check StockKuang No Cap Eagle Gas Can Replacement Spouts Rubber Spout and Stopper Jerry Can 1.5
- 【10L Large Capacity】 - This 2.5-gallon (10L) large capacity tank provides you with enough endurance and is very suitable for being put on the car as a backup fuel for your journey. You don't have to worry about the lack of fuel..
- 【Durable & Sturdy Material】 - The fuel gas can is made of high quality cold rolled steel plate with superb welding and sealing techniques for excellent durability and robustness. You don't have to worry about a dented or damaged fuel tank from a crash during rough off-road driving..
- 【Easy to Carry】 - The size of the fuel tank is 14.1 inches x 10.35 inches x 6.4 inches (L x W x H), which is lightweight and convenient to carry. When you go out for a trip or camping, you can put this tank in the trunk of the car, which doesn't take up space at all..
- 【Multi Purpose】 - This oil tank is suitable for automobile refueling, engine domestic lubricating oil, liquor and water bucket. Can be used to store fuel oil, petrol, diesel or any other liquor. And it's easy to clean when you're not using it..
- 【Spout System Design】 - An additional spout system with extension tubing allows you to quickly replenish the fuel in the gasoline tank and improve your efficiency. At the same time, the unique vent inside the tank allows you t....
Check StockSierra International 116-355-1124 1 1/2\ X 12 1/2' Marine Fuel Hose , Black
- Can Easily be bent into Tight Radius: (Flexibility 1).
- Designed to give Excellent Service for: Oil Tank Fill, Fuel Tank Fill.
- Not Available in Size Range: Fuel feed Outboard, Fuel Tank Vent Outboard, Fuel Tank Vent Inboard, Fuel Feed Inboard/Outdrive.
- Meets SAE J1527 Type A2 and ISO 7840 Type A2 NMMA/CE Type Accepted standards.
Check Stock240-33 ohms 4' (100mm) Fuel Tank Sending Unit for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor
- Superior Performance: Our fuel tank sending unit fit 4.25-5" fuel tank has an advantage over thick film swim arm level sensors in the durability and reliability of a reed switch, no part damage, and no tank adjustments required.
- Durable Material: The fuel sending unit is made of heavy duty 316 stainless steel, which is reliable and durable, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments.
- Wide Range of Application: The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges.
- Simple Installation: The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative.
- Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should b....
Check StockPortable Fuel Tank 116gl Diesel
- FAST & EFFICIENT TO Fill: The 8ft kink free hose of the gas caddy ensures maximum flow and the tank is filled at the fastest speed.Wide diameter neck provides a larger opening for fill, without spilling or waste of fuel. And ergonomic hand crank, labor-saving and improve efficiency..
- SAFE: Friction will cause static electricity in the process. The design of anti-static grounding clamp,it can prevent accidental static discharges and eliminate static electricity , so its safe to use. The fuel caddy is deal for storage of gasoline and diesel..
- MOVABLE & EASY TO USE: Wheel and Hand pusher design for easier mobility and transportation. The design of easy to read vent/fuel level gauge makes it convenient for you to observe the remaining oil in the. Reversible rotary hand pump can suck the fuel remains in the kink free hose back to the fuel tank ,convenient and waste free..
- LARGE CAPACITY: 30 gallon large capacity fuel storage space design. The fuel transfer tank is ideal for gas powered lawn and garden tools, automobiles, ATVs and a wide range of fuel powered pieces of equipment..
Check Stock