Top Full Automatic Flange

WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump

  • Assembled in the US with foreign and domestic parts.
  • Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V).
  • Pressure switch is pre-set at 30-50 psi for automatic operation..
  • Durable cast iron volute with dedicated priming port for volute filling.
Check Stock

boeemi Toilet Flanges and Wax Rings for Toilets with Extended Flanges and Extra Thick Wax Rings for Floor Exit Toilets New Installation or Reinstallation 4" Waste Line for Plumbing Below Floor

  • 【Toilet Wax Ring Replacement Kit】toilet flange repair kit is used to install new floor-standing toilet installation or repair old toilet. If the pipe is a little further from the ground, you can use an extended flange to hold the pipe in place to prevent the pipe from shaking, the wax rings for toilets extra thick is high enough to make up for the extra tile height, and it is perfect for raising the toilet when adding a floor..
  • 【Why do you need to replace】Toilet and sewer compartment with a perfect seal toilet wax ring to help you solve a series of problems such as sewer odor, backwater or rust, toilet flange damage. If there is sewage flowing out of the toilet, inexplicable shaking of the toilet, or peculiar smell in the toilet, please purchase a toilet wax remover in time. The toilet flange repair kit will keep the bathroom clean and comfortable..
  • 【Easy to Install】The wax ring is easy to install and inexpensive, without the help of a plumber, saving you expensive plumbing bills. The toilet is fully wax toilet ring seal, avoiding secondary purchases, saving time, instantly solving a series of toilet problems, and successfully preventing toilet odor....
Check Stock

InSinkErator QLM-00 Flange Quick Lock Disp Mount, Stainless Steel

  • DISPOSER SINK FLANGE: Available only from InSinkErator, this Polished Stainless Steel sink flange features the Twist-On, Twist-Off Quick Lock design that helps ensure fast and easy replacement of existing disposer mounts..
  • FOR STAINLESS STEEL SINKS: This polished stainless steel InSinkErator sink flange complements most stainless steel sinks..
  • AMERICA'S #1 DISPOSER BRAND: There are more American-built InSinkErator garbage disposals in US homes than all other brands combined. A full line of models means there's one right for every need and budget..
  • FASTER, CLEANER, SMARTER: From meal prep to cleanup, InSinkErator helps make it fast & easy to keep your kitchen clean with our iconic appliances: garbage disposals & instant hot water dispensers..
  • A HISTORY OF INNOVATION FOR THE SINK: We invented garbage disposals in 1927, & we're the world’s largest manufacturer of garbage disposals & instant hot water dispensers for home & commercial use..
Check Stock

ISPINNER 100pcs 6 Sizes Aluminum Blind Rivets, Pop Rivets Assortment Kit 3/16\ x (5/16\ 3/8\ 1/2\ 5/8\ 3/4\ 1\)(Silver)

  • Material: These large bolt dropper rivets are made from high quality 100% aluminum alloy which is one of the highest forms corrosion resistance, making it longer last, sturdy, light, durable, easy and convenient to use. The highest quality will support all of your projects..
  • Head Size: Head diameter 3/16" (4.8mm), Length: 1" (25mm). Large Flange OD: 5/8" (16mm), Grip Range: Diameter 3/16"(4.8mm), Length: 11/16"-3/4"(17.4-19mm)..
  • Fitted Tools: The flange blind rivets assortment perfect fitted with automatic riveting machine, rivet bucket, and rivet gun..
  • Easy to use: The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. Using a rivet gun, the centerpiece (mandrel) is pulled up and creates a bulge at the bottom permanently locking and securing the material..
  • Applications: The aluminum open end pop long rivets are very strong and are great be used in a variety of environments including salt water, freshwater, indoor and out,and widely suitable for joining plastics, rubber, wood, grip and laminates, is used in assembly of caravans, trailers, furniture, plastic-framed window body..
Check Stock

CBW Washer (250 pcs.)

  • DIMENSIONS IN INCHES: Hole Size: 1-3/32 Flange Diameter: 1.865 Length Under Flange: .465 Metal Thickness: .025 Inside Diameter: 1.195 Outside Diameter: 1.910 Metal Thickness: .020.
  • FAST SHIPPING - Orders are shipped within 1 business day. All orders placed by 2:30pm ET ship same day!.
  • HIGH QUALITY - All products are rigorously inspected in-house to yield near-zero defect rates. Stimpson has been ISO 9001 certified for over 10 years..
  • RICH HISTORY - Founded in 1852, Stimpson produces the largest variety of standard and special eyelets, grommets, washers and hole plugs of any single company in the world..
  • LIFETIME GUARANTEE - No hassle return for any item defects, full replacement of items guaranteed..
Check Stock

Cool Attic CX1500UPS Power Gable Ventilator Fan

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat.
  • GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers.
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction.
  • EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs.
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof.
Check Stock

50#6 Nylon Finishing Washers - Black

  • DIMENSIONS IN INCHES: Hole Size: 3/16 Flange Diameter: .425 Length Under Flange: .135 Metal Thickness: .009 Inside Diameter: .218 Outside Diameter: .460 Metal Thickness: .009.
  • FAST SHIPPING - Orders are shipped within 1 business day. All orders placed by 2:30pm ET ship same day!.
  • HIGH QUALITY - All products are rigorously inspected in-house to yield near-zero defect rates. Stimpson has been ISO 9001 certified for over 10 years..
  • RICH HISTORY - Founded in 1852, Stimpson produces the largest variety of standard and special eyelets, grommets, washers and hole plugs of any single company in the world..
  • LIFETIME GUARANTEE - No hassle return for any item defects, full replacement of items guaranteed..
Check Stock

Nenesupply 19mm Flange Insert Compatible with Elvie Flange Pump Parts Elvie Stride Flange Medela Spectra Momcozy Flange Willow Reduce 24mm to 19mm Use as Elvie Inserts Medela Insert Momcozy Insert

  • CONTENT: 2pc 19mm NENESUPPLY Silicone Flange Inserts compatible with 24mm of Elvie flange, Elvie Stride flange, Momcozy flange, Medela flange (Personalfit Flex and Freestyle Hands-Free), Spectra flange, Willow flange, Willow Go flange, and Motif Luna flange. Reduce 24mm to 19mm. MADE BY NENESUPPLY. Compatible with Elvie pump parts accessories and Willow pump parts..
  • COMPATIBLE PUMPS: Work with 24mm FLANGES of most breast pumps in the market. See product photo for illustrations..
  • AVAILABLE IN 15, 17, 19, 21mm. MADE FROM SOFT SILICONE: Soft silicone makes pumping more comfortable. Reduce flange funnel to 19mm. Suitable for moms with smaller nipples. Correct flange sizes make pumping more efficient..
  • NO LOSS OF SUCTION- Embeded sealing circles creates a complete seal. EASY TO INSTALL & REMOVE - Easy to push in and pull out the inserts. Hassle-free.
  • EASY TO CLEAN: Dishwasher safe (top rack only). BPA and DEHP Free. FDA compliant for food contacts. Made by FDA regulation compliant manufacturer..
Check Stock

maXpeedingrods Universal Street Performance GT35 GT3582 Turbo for 2.5L-6.0L Engine T3 AR.70 Anti-Surge Compressor Turbo Charger Bearing 600+HP Water + Oil cooled Billet Compressor Wheel

  • 【Applicaiton】: Perfect for all 4/6 cylinder 2.5L-6.0L engine. Boost Horse Power up to 600HP..
  • 【Specifications】: Exhaust (Turbo Manifold) Flange: T3 Flange & Exhaust (Downpipe) Flange: 4 Bolts. Cooling Type: Water + Oil cooled.
  • 【Billet Compressor Wheel】: Forged full-machined billet aluminum compressor wheels with a larger horsepower range and better boost response.
  • 【Upgrade High Quality Material】:1. "100% balancing Test" by TURBOTECHNICS VSR3. 2. Turbine housing ：Silicon-Molybdenum - temperature resistant....
  • 【NOTE THAT】: Please lubricate the turbo bearing fully before installing, TO ADVOID SHAFT PLAY AND DAMAGE IF INSUFFICIENT OIL SUPPLY. Professional....
Check Stock

Kohler TLS10276-4-BN Forte K-TLS10276-4-BN Sculpted Rite-Temp Shower Valve Trim, Less showerhead Vibrant Brushed Nickel

  • Coordinates with forté Faucets and accessories.
  • Provides temperature regulation and automatic anti-scald protection.
  • Single handle controls both on/off activation and temperature setting.
  • Includes faceplate with ADA-compliant metal sculpted lever handle.
Check Stock

62pc Specbolt YZ YZF WR Body Bolt KIT for Yamaha Plastics, Seat, Fenders, Fork Guards Radiator shrouds bodywork YZ YZ-F WR YZ60 YZ80 YZ85 YZ125 YZ250 YF250F YZ400F YZ426F YZ450F YZF250 YZF450

  • 62 factory fit flange bolts including a full set of OE matching wide head flange bolts and fork guard bolts.
  • Original type reduced head flange bolts with factory matching zinc plating.
  • Replace all your plastic body work bolts with Factory Matching fasteners.
  • Used for plastics, body work, and seat for Yamaha off road Motorcycles.
Check Stock

CS OSBORNE SS-1 STAINLESS STEEL GROMMETS & PLAIN WASHERS PK/144

  • DIMENSIONS IN INCHES: Hole Size: 13/32 Flange Diameter: .790 Length Under Flange: .205 Metal Thickness: .016 Inside Diameter: .455 Outside Diameter: .790 Metal Thickness: .016.
  • FAST SHIPPING - Orders are shipped within 1 business day. All orders placed by 2:30pm ET ship same day!.
  • HIGH QUALITY - All products are rigorously inspected in-house to yield near-zero defect rates. Stimpson has been ISO 9001 certified for over 10 years..
  • RICH HISTORY - Founded in 1852, Stimpson produces the largest variety of standard and special eyelets, grommets, washers and hole plugs of any single company in the world..
  • LIFETIME GUARANTEE - No hassle return for any item defects, full replacement of items guaranteed..
Check Stock