Top Fully automatic Concrete Block Machine

6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block

  • 6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block.
  • Cut the Hardest Materials: Hard Concrete, Cured Concrete, Reinforced Concrete, Concrete Block, Brick.
  • 17" Overall Length 14" Long Barrel Length.
  • Built for Pros who need the highest quality.
Check Stock

INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
Check Stock

AmazonBasics No-Stud Heavy-Duty Tilting TV Wall Mount Bracket for 32-inch to 80-inch TVs

  • No stud TV wall mount accomodates 32- to 80-inch TVs.
  • can hold up to 150 pounds in drywall and 200 pounds in wood, concrete or concrete block.
  • Low profileextends only 1 inches from the wall for a clean appearance and can tilt up to +5 degrees.
  • Made of heavy-duty steel for reliable strength.
  • Install the base of the mount to the desired location (wall studs not required for installation).
  • Automatic safety lock keeps TV securely in place.
  • Built-in bubble level and all mounting hardware included for easy installation.
  • Fits VESA 100x100 600x400mm mounting patterns (The VESA mounting patterns are the distances (in mm) between the four screw holes on the back of the TV).
Check Stock

AmazonBasics No-Stud Heavy-Duty Tilting TV Wall Mount for 32-inch to 80-inch TVs (Renewed)

  • No stud TV wall mount accomodates 32- to 80-inch TVs.
  • can hold up to 150 pounds in drywall and 200 pounds in wood, concrete or concrete block.
  • Low profileextends only 1 inches from the wall for a clean appearance and can tilt up to +5 degrees.
  • Made of heavy-duty steel for reliable strength.
  • Install the base of the mount to the desired location (wall studs not required for installation).
  • Automatic safety lock keeps TV securely in place.
  • Built-in bubble level and all mounting hardware included for easy installation.
  • Fits VESA 100x100 600x400mm mounting patterns (The VESA mounting patterns are the distances (in mm) between the four screw holes on the back of the TV).
Check Stock

Gaggia Babila RI9700/64 espresso Machine, Stainless Steel

  • FULLY AUTOMATIC: Easily brew delicious cafe-quality coffee and espresso drinks at home.
  • select your desired drink with the turn of a dial.
  • BUILT-IN METAL CONICAL BURR GRINDER: Grind beans quickly and evenly right before brewing for enticingly rich aroma and full-bodied flavor — simply add beans to the large sealed bean hopper and select the desired grind.
  • MILK FROTHER: Integrated milk container allows for frothing milk — great for making lattes, cappuccinos, and more.
  • easy to clean with automatic cappuccino cleaning setting.
  • PROFESSIONAL RESULTS: Equipped with Thermo Block heating technology, a 15-bar high-pressure pump, and a hydraulic automated tamping system, the machine ensures professional barista-style brewing every time.
  • USER-FRIENDLY DESIGN: Intuitive controls with an LCD screen and knob for ease of use.
  • removable 60 oz. water tank, steam nozzle, drip tray, and cake container for convenient cleaning and low maintenance.
  • compact size takes up minimal counter space. Made in France with 2-year warranty.
Check Stock

HBKEEN Core Drill Bit for Concrete Diamond Laser Welded Core Bits 1-1/4"-7 Threaded for Hard Concrete Brick and Block (8 inch）

  • {Specification} 8 inches Laser Welded Diamond Wet Drilling Core Bits.
  • {Drilling Depth} 14" with mesh segments. Fast,smoothly, long life.
  • {Application} #30/40 diamond grit, designed for drilling concrete, reinforced concrete, hard brick, block and other hard masonry.
  • {Drilling method} Wet use only. Hand held drill, drilling machine.
Check Stock

VEVOR Demolition Jack Hammer 2200W Electric Jackhammer Heavy Duty 1350 BPM Concrete Breaker 2pcs Chisels Bit Chipping W/Case

  • Superior Performance & Top Quality: A 2000W industrial motor with 66J impact energy is designed to complete concrete and metalworking projects quickly and precisely. It is intended for professionals. This electric jack hammer adopts heavy-duty aluminum construction, is highly durable, and is corrosion resistance for long-term use..
  • Reassuring Experience: The high-strength alloy chuck can withstand the strong impact of the demolition operation. The chipping hammer chuck features quick assembly and disassembly. It is easy to replace the chisel that will never drop accidentally after being clamped. The handle is made of plastic to avoid electric shock hazards..
  • Designed To Go Above And Beyond: The 360°rotary handle reduces fatigue during prolonged work. It provides accuracy and precision in some relatively narrow places. The demolition hammer is also equipped with a suitcase for carrying conveniently. The locking button can automatically maintain operation, saving effort..
  • Stays Cool During Intense Work: The efficient cooling system effectively cools the motor to improve the concrete breaker's life. The engine will be at low temperatures even after a long working time..
  • Wide Range of Applications: The 110V power demolition drills & hammers include ....
Check Stock

Protimeter BLD8800-S MMS2 Basic Survey Kit Moisture Meter with Pouch

  • Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
  • Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • This Package Includes: MMS2 Instrument, Short Humidity Quickstick, Hygrostick Humidity Probe, Quickstick External Lead, Heavy Duty Moisture Probe, Deep Wall Probe (5″), Calibration Check Device, Instructions, Software And Cable, Soft Carry Pouch.
Check Stock

BLUEPOINT BP303A- .27 Caliber semi-automatic powder actuated tool, for 10 shot (6.8 x 11mm) strip load

  • This Fully Automatic Powder-Actuated Fastening Tool is perfect for many applications - fastening drywall track, 2x4s, suspended ceiling applications, insulation, and fastening grating to concrete or steel is a snap..
  • The fully automatic cartridge advance and piston return provides for a higher fastening rate, without the need to manually cycle your tool..
  • The magazine accessory accepts collated strips of 10 fasteners, and an optional narrow-access baseplate allows for use of single fasteners with pre-mounted steel washers..
  • This tool meets ANSI standard A 10.3, as well as OSHA requirements for low velocity tools..
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

12" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry, 12mm Segment Height, 1" Arbor

  • MULTIPURPOSE - 12" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
Check Stock