Top Fuse Terminal
Blue Sea Systems 5129 Fuse ANL 200-AMP
- Wire Gauge:- It can securely hold the fuse and use it with 1/0,2,4AWG Ring Terminals..
- Application:These inline fuse will protect your controller, wire, and battery from overcurrent,suitable for auto car, boat ,truck audio video systems or other vehicles..
- Material:ANL fuse made of copper alloy and gold plating on the surface, durable and reliable to use, heat resistant, melting resistance and good conductivity, clear cover and holder features transparent design, allow you to visually see the operation of the fuse, waterproof cover protect the internal fuses from water and further damage..
- Notice:Because the fuse will be damaged during transportation, the fuse and fuse box are packed separately and can be used after simple installation after receiving the goods..
- Package:2pcs ANL Fuse+2pcs ANL Holder+4pcs Copper Ring Terminal+4pcs Heat shrinkable tube.
Check StockCZH-LABS DIN Rail Mount 2 Ports Passive RJ45 PoE Power Injection Board Power Over Ethernet Injector Module.
- Simple Power up 2 Passive 10/100Mbps PoE devices by one power source Application use for Access Points, IP cameras, IP phones, etc..
- Power Input terminal block for all PoE power supply, each port serial a recoverable fuse(fuse value 1.1Amp / 72V). Power Expansion Output terminal....
- Switch On/Off to save electricity while not use, LED indication for switch On/Off status..
- Specifications: Terminal Block Power Input: 12VDC - 60VDC, maximum current 10Amp.
- Termianl Block Expansion Output: maximum current 10Amp.
- High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check StockPSEQT Mini 6-Way Marine Blade Fuse Block with Negative Bus ATC/ATO Waterproof Automotive Fuse Box Standard Circuit Holder Panel for Boat Yacht Vehicle Auto RV Car Trailer Truck SUV
- ✅【Application】6 Way Blade Fuse Block keeps wiring clean, which each positive terminal screw has a negative terminal screw to make your circuit clear at a glance. Work for all 10V-32V DC automobiles, vessels and devices. Maximum of 20 Amp per circuit & 75 Amp per panel..
- ✅【Safety】When the current is too high or the wire shorts, the fuse will blow to avoid potential safety hazards. And multifunctional DIY stickers can make you instantly and accurately identify and replace the fuse..
- ✅【High Quality】Made of environment friendly PBT material, this 6-way fuse block meets all the standards of an ideal fuse box. High mechanical strength, good insulation, heat and flame resistance. It hardly causes any problems such as cracking, deformation, burning or short circuit..
- ✅【Common Use】Widely used in Car, Boat, Truck, Trailer, Bus, RV, RZR, UTV, Pontoon, Yacht, Tanker, etc. Each fuse can be connected to any electrical circuits like ceiling lights, headlights, fog lights, tail lights, rocker switch, toggle switch, etc..
- ✅【PSEQT Warranty】5 Years Warranty Guarantee. Strictly testing before shipping. Feel free contact us for any question, we have professional service and excellent quality team..
Check StockQuick Yoga Training - Nintendo DS
- ... coils.The dryer heating element has a nickel-chromium content of 90%. And the length of the heating wire is 25% longer than other common dryer replacement parts.More uniform heating & no damage to clothes.279838 dryer heating element is rated at 5400 Watts 240 Volts and it has 2- 5/16 inch male connection terminals..
- ✅【COST-EFFECTIVE 279838 HEATING ELEMENT KIT】---Includes 1 x 279838 Dryer Heating Element,1 x 3392519 Thermal Fuse,1 x 3977393 Thermal Cut-off,1 x 3977767 Dryer Thermostat,1 x 3387134 cycling thermostat with screws and wiring kit.▶3392519 Dryer thermal fuse, has two 3/16" wire terminals.▶279816 Thermal Fuse & Thermostat Kit includes thermal fuse, thermostat, screws, wiring kit.▶3977767 Dryer high limit thermostat has one 1/4" male terminal, 1/4" female terminal, and one 3/16" male terminal. L221..
- ✅【WIDE COMPATIBILITY】--- 279838 Dryer Heating Element Kit replacement for Whirlpool, Ken-more, Crosley, Roper, Estate, Amana, Admiral and more brand dryer. Replaces 279837, 279838A, 279838VP, 3398063, 3398064, 3403585, 8565582, W10724237, WP279837, 2438, AP3094254, PS334313, EAP334313,etc.►279838 Dryer Heati....
Check StockScosche Install Centric ICAK4 4 Gauge 2-Channel Amplifier Wiring Kit
- Oxygen-Free Copper and Copper-Clad Aluminum Hybrid Cable: Our kit is made heavy-duty oxygen-free copper and copper-clad aluminum for excellent....
- In-Line Fuse Holders: The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers for convenient installation and....
- Double Strength Ground Terminal: A unique pre-terminated ground terminal design that dramatically simplifies installation and improves performance.
- Twisted Pair Audio Cables: The twisted pair RCA cables reject noise to provide better sound performance.
- Buy With Confidence: Backed by Scosche's Lifetime Tech Support and a Lifetime Limited Warranty.
Check StockFastronix 12 Terminal Power Distribution Block Kit
- Rated to 240 Amps with a 1/4-20 Input Stud on a Nickel-Plated Bus Bar with 12 #8-32 Stainless Steel Terminal Screws.
- 3/16" Mounting Holes on Each Side of Terminal Block.
- Includes 12 Premium Double Crimp Nylon Insulated Ring Terminals.
- Includes Hard Protective Cover (Red) and Flexible Stud Terminal Boot (Red).
- Use with Fastronix Relay Panel (#900-004) and LED Fuse Panel (#500-043) for Professional, Protected Circuits.
Check StockSCCKE Heavy-Duty 14AWG 20A Male Plug Cigarette Lighter Adapter Power Supply Cord with 6.5ft / 2m 14 AWG Cable Wire For Car inverter Air pump electric cup and DIY
- 14 AWG(14 awg,2.08mm2>16 awg,1.31mm2) extension cable lengthened up to 6.5ft / 2m,Line nose aperture is 6.3 mm,Eyelet Terminal Used for 5mm or 6mm inverter studs..
- This is a standard parts,high power plug, hardness, high resistance, arc resistance, heat resistance, apply to almost all models of cigarette lighter socket.Also can use other appliances with terminal..
- 12V and 24V are both allow, the output voltage is the same as the voltage in the car.male plug is fitted with 20A fuse(6x30mm Common Fuse in Local Store) to protect your vehicle and devices and has LED light indication of power on..
- Warranty:Will provide with 12-months Warranty from the date of its purchase..
- .Package Contents: 1 x SCCKE 6.5ft / 2m 14AWG Wire Cigarette Lighter Plug 1 x 20 Amp fuse 1 x 25 Amp fuse.
Check StockBlue Sea Systems ST-Blade Water-Resistant 4 Circuit Fuse Block, 5056
- Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32.
- Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools.
- Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers.
- Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required and 4 write-on circuit labels.
- Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire.
- Fuses and circuit breakers sold separately. Storeage for spare fuse and fastener in cover.
- Not ABYC compliant, not intended for marine applications, use PN 5056100 for marine use.
Check StockSCCKE Heavy-Duty 14AWG 20A Male Plug Cigarette Lighter Adapter Power Supply Cord with 6ft / 1.9m 14 AWG Cable Wire For Car inverter Air pump electric cup and DIY
- 14 AWG(14 awg,2.08mm2>16 awg,1.31mm2) extension cable lengthened up to 6ft / 1.8m,Line nose aperture is 6.3 mm,Eyelet Terminal Used for 5mm or 6mm inverter studs..
- This is a standard parts,high power plug, hardness, high resistance, arc resistance, heat resistance, apply to almost all models of cigarette lighter socket.Also can use other appliances with terminal..
- 12V and 24V are both allow, the output voltage is the same as the voltage in the car.male plug is fitted with 20A fuse(6x30mm Common Fuse in Local Store) to protect your vehicle and devices and has LED light indication of power on..
- Warranty:Will provide with 12-months Warranty from the date of its purchase..
- .Package Contents: 1 x SCCKE 6ft / 1.8m 14AWG Wire Cigarette Lighter Plug 1 x 20 Amp fuse 1 x 25 Amp fuse.
Check StockSCCKE Heavy-Duty 14AWG 20A Male Plug Cigarette Lighter Adapter Power Supply Cord with 10ft / 3.05m 14 AWG Cable Wire For Car inverter Air pump electric cup and DIY
- 14 AWG(14 awg,2.08mm2>16 awg,1.31mm2) extension cable lengthened up to 10ft / 3.05m,Line nose aperture is 6.3 mm,Eyelet Terminal Used for 5mm or 6mm inverter studs..
- This is a standard parts,high power plug, hardness, high resistance, arc resistance, heat resistance, apply to almost all models of cigarette lighter socket.Also can use other appliances with terminal..
- 12V and 24V are both allow, the output voltage is the same as the voltage in the car.male plug is fitted with 20A fuse(6x30mm Common Fuse in Local Store) to protect your vehicle and devices and has LED light indication of power on..
- Warranty:Will provide with 12-months Warranty from the date of its purchase..
- .Package Contents: 1 x SCCKE 10ft / 3.05m 14AWG Wire Cigarette Lighter Plug 1 x 20 Amp fuse 1 x 25 Amp fuse.
Check StockIN-LINE ANL FUSE HOLDER 4 WAY 1x0GA-4x4GA WITH FUSE DISTRIBUTION BLOCK STEREO/AUDIO/CAR
- This 100Amp power distribution fuse holder is made out of high quality materials in order to get professional results from your car subwoofer audio system..
- This fuse block holder designed for high performance car audio systems and other electrical high current applications. The power fuse compartment geared up with a heat-resistant acrylic covers and corrosive resistant materials such as gold-plated finish. The new style engineering design makes your installation safe and stylish..
- Gold Plating Terminal Fuse Block, 4X100A Fuse Included..
- Screw terminals hold cables securely in place,Fast and easy installation.
Check StockWadoy 3390719 Dryer Thermal Fuse Compatible with Ken-more Sears WP3390719 PS11741444 AP6008309 (4)
- Non OEM Parts. Replaces part numbers: AP3133489, 15-198, 279650, 2923, 3389639, 3389640, 660877, 688841, 690198, 690798, 80004, AH344958, EA344958, ET402, PS344958..
- Brand new Thermal Fuse Compatible with Following: Kir-kland, Kit-chen Aid, Sears, Ken-more, Roper, Estate, May-tag, Ma-gic Chef, and many other brands..
- Disposable thermal fuse. 2 terminal. Cannot be reset. Fuse is located on exhaust duct..
- Designed to fit your product perfectly. Package included 4 packs 3390719 Dryer Thermal Fuse..
- "Thermal fuse, compatible with Ken-more." This thermal fuse was not created by Ken-more, or affiliated with the brands it fit, including May-tag, Kir-kland, Kit-chen Aid, Sears, Roper, Estate, May-tag, Ma-gic Chef..
Check Stock