Top G Inch Thread

HOAOH 52 Pcs Stainless Steel Thread Gauges Whitworth Imperial 55 Degree, Metric 60 Degree, US 60 Degree Thread Gauge for Screws Measuring Tool

  • √ Size: Metric (mm) - 60° and Whitworth Imperial - 55°..
  • √ Metric Size: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • √ Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • √ Typically used to check the thread size is correct, and checking tool angle while cutting threads in metal turning lathes..
  • PRECISION MEASUREMENT - 52pcs Thread Gauge, The reading precision is more highly to helping you more accurately measured the size and gap distances..
Check Stock

Hollis DIN to Yoke Adapter

  • Fit for 200-300 Bar DIN Scuba tank valves..
  • Tightened using 8mm hex key (not included)..
  • Made of chrome plated brass, high tensile strength and corrosion resistance..
  • Height: 0.6inch/1.5cm, Outer Diameter: 0.8inch/21.5mm, Inner Diameter: 0.4inch/1cm..
Check Stock

JJC Dedicated Bayonet Reversible Lens Hood Shade for Nikon AF-P DX Nikkor 18-55mm F3.5-5.6G VR & AF-P DX Nikkor 18-55mm F3.5-5.6G Lens on Nikon D3500 D5600 D7500 Camera Replace Nikon HB-N106 Lens Hood

  • 【Compatible Lens】:This lens hood fits Nikon AF-P DX Nikkor 18-55mm F3.5-5.6G VR Lens(55mm Filter thread), Nikon AF-P DX Nikkor 18-55mm F3.5-5.6G Lens(55mm Filter thread) and NIKON 1 NIKKOR VR 10-100mm f/4-5.6(55mm Filter thread).It replace Nikon HB-N106 Lens Hood..
  • 【Attention】:This lens shade doesn't fit Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G VR II(52mm Filter thread),Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G VR(52mm Filter thread) and Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G II(52mm Filter thread)..
  • 【55mm filter & lens Cap】:Minimizes flare and ghosting by blocking out stray light，it also allows the use of 55mm filter and lens cap..
  • 【High Quality】:Made of high quality ABS material, reversible design allows you to mount the hood in reverse for compact storage..
  • 【Protective】:Protects your lens from accidental impact and the elements..
Check Stock

Campbell Hausfeld 2 Horsepower Air Compressor Pump with Flywheel (VT4823)

  • Pacakge included : 2 PCS 1/2"PT 20mm Air Compressor Silencer Filter.
  • Widely Used on admitting port of the air compressor can effectively block the dust in the air moisture to reduce the noise at work..
  • Silencer Filter can be used in noisy equipment, such as blowers, air compressors, boilers, exhaust port, generators, pumps and exhaust ports..
Check Stock

NewkeepsR 2PCS-16G(1.2mm) 316L Steel Calor Style Taper Insertion Pin for Ear/Nose/Navel/Nipple/Lip/Eyebrow Stretcher, Body Piercing Stretching Kit Assistant Tool

  • Size: 16ga(1.2mm) thickness,2.4'' length(60mm). One package contains 2 insertion pins. ① Style A: a hollow at the end, ( "No Thread Inside" will NOT screw onto your externally threaded jewelry,Just holding). ② Style B: No hollow,just stretch piercing hole to 16g(1.2mm) thickness..
  • ① Style A Function: Used for assisting in the placement of shaft. Put piercing bar in the end of the pin, then push it though.Pin will come out of the hole and piercing bar will be in. Great for changing jewelry. Groove at the end helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 18g to 16g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk a bit or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubric....
Check Stock

NewkeepsR 2PCS-14G 1.6mm 316L Steel Calor Style Taper Insertion Pin for Ear/Navel/Nipple/Lip/Tongue Stretcher Body Piercing Stretching Kit Assistant Tool

  • Size: 14ga(1.6mm) thickness,2.4'' length(60mm). One package contains 2 insertion pins. ① Style A: a hollow at the end, ( "No Thread Inside" will NOT screw onto your externally threaded jewelry,Just holding). ② Style B: No hollow,just stretch piercing hole to 14g(1.6mm) thickness..
  • ① Style A Function: Used for assisting in the placement of shaft. Put piercing bar in the end of the pin, then push it though.Pin will come out of the hole and piercing bar will be in. Great for changing jewelry. Groove at the end helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 16g to 14g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubr....
Check Stock

Quickun 1\ ABS Bulkhead Water Tank Connector Adapter Fitting with Plugs Thru-Bulk Pipe Fitting (Set of 2)

  • 【Size Information】: The double threaded bulkhead fittings are 1 inch G male and 1 inch G female thread(Bulkhead OD: 44.6mm)..
  • 【Included】2Pcs bulkhead adapter and 2Pcs plugs..
  • 【Durable】:Material:ABS.This bulkhead fittings will not fade, crack, or peel..
  • 【Easy to Use】:Drill a 44.6mm hole for installation, then assemble the ABS bulkhead and hose adaptor together.
  • 【Function】:Can be mounted in walls, tanks, or panels. Bulkhead design to make the fitting easy through holes..
Check Stock

MOSNAI Golf Cart Ball Joint Kit Tie Rod End for EZGO TXT 2001-up Electric or Gas Golf Cart Driver and Passenger Side 70902-G01 70902-G02 (2 PCS)

  • ✅【Fit Models】Golf cart EZGO tie rod ends ball joint, fits 36V EZGO TXT 2001-up electric & gas golf carts..
  • ✅【Replaces OEM Part】Driver side-left hand thread (included 1Pcs), OEM#70902-G01.
  • Passenger side-right hand thread(included 1Pcs), OEM#70902-G02..
  • ✅【Function】EZGO tie rod ends, replacing your worn tie rods will improve your carts steering and reduce tire wear..
  • ✅【Easy Installation】The boots contain grease, don't need to add extra. Replaces your worn out or damaged parts directly, no need to modify the vehicle..
  • ✅【Package Content】1PCS 70902-G01 left-hand thread outer tie rod end + 1PCS 70902-G02 right-hand thread outer tie rod end, premium quality materials to provide a long service life..
Check Stock

50 Positions Floss Organizer Embroidery Shelf, Luxiv Thread Organizers for Cross Stitch Embroidery Thread Holder with 15Pcs Replaceable Paper Card Sewing Needle, Embroidery Floss Organizer

  • 【High-Quality Material】: Floss organizer embroidery shelves are made of top sturdy ABS plastic and soft foam, surface smooth, don't scratch thread, durable..
  • 【50 Positions Floss Organizer】: More positions design, could storage more embroidery floss and sewing needles, packed with 15 pieces replaceable paper card for different threads, enough for daily use..
  • 【Save Your Time and Energy】: Cross stitch thread holder could storage thread line, used threads with the needle, reels, could to use directly next time, convenient and save time..
  • 【Portable and Easy to Use】: Thread organizers size is 10.8 x 4 x 1 inch (27.5 x 10.5 x 2.5cm), weight is about 220g, lightweight easy to portable, and use..
  • 【Widely Use & Perfect Gift】: Cross stitch thread storage suit for storage needle, embroidery floss, and sewing works, it's the perfect gift for mother and sewing lovers..
Check Stock

iBroPrat Glad Hand Grips Set with Seals,Gladhand Extension Handles Kit Emergency & Service Brake Air Hose Coupling Connectors for Semi Trucks Trailers Tractors RVs, Glad Hands Parts Red Blue 1 Pair

  • ...others usually only 357g. Our handles are more durable and not easy to break. Our wide hex handles provide better grip than the small cylindrical, and provide greater leverage for ease of coupling/uncoupling air lines..
  • 【NO-LEAK】- High hardness steel clamp plates, port thread machined by lathe, smoother. Leak proof gum on the handle thread. They ensure that glad hands are tightly connected under strong air pressure. Gaskets are made of high-quality rubber, the aging resistance is very strong, prevent air leakage efficiently. Gladhands kit is color coded red & blue for easy identification..
  • 【WITH 2 EXTRA SEALS】- Leakage is usually caused by the wear of rubber. The extra washers keep the glad hands in excellent working condition. This is a very cost-effective solution..
  • 【SIZE & QUANTITY】- Connect size: 1/2 NPT port, Handles size: 4.8 inch x 1.2 inch, Glad hands size: 4.1 inch x 2.2 inch. Quantity: 1 pair glad hands, 1 pair glad hand grip handles, 2 pieces rubber o rings. They are packed in the fine boxes..
  • 【WIDELY USED】- Airline glad hands meet or exceeds SAE ....
Check Stock

Premium CO2 Cartridge for Life Jacket - Manual Version CO2 Rearming Kit Cylinder Tank Canister for Inflatable Lifejacket Life Vest Life Belt Pack PFD CO2 Replacement Refill Size 17G 24G 33G 60G Gram

  • This CO2 rearming kit inflates your manual lifejacket..
  • Premium quality, heavy-duty, easy to install and remove..
  • Fits various size inflatable lifejackets with 1/2-inch thread cylinder..
  • Fast shipping from our USA warehouse. Great customer service..
  • Flotation: 17g=80N, 24g=110N, 30g=130N, 33g=150N, 60g=275N.
Check Stock

Premium CO2 Cartridge for Life Jacket - Auto Version CO2 Rearming Kit Cylinder Tank Canister for Inflatable Lifejacket Life Vest Life Belt Pack PFD CO2 Replacement Refill Size 17G 24G 33G 60G Gram

  • This CO2 rearming kit inflates your auto/manual lifejacket..
  • Premium quality, heavy-duty, easy to install and remove..
  • Fits various size inflatable lifejackets with 1/2-inch thread cylinder..
  • Fast shipping from our USA warehouse. Great customer service..
  • Flotation: 17g=80N, 24g=110N, 30g=130N, 33g=150N, 60g=275N.
Check Stock