Top Galvanized Pipe Elbow

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

4 Pack 304 Stainless Steel Mandrel Bend Elbow, 90 Degree Exhaust Elbow Pipe, 2.5 Inch OD Mandrel Elbow, Thickness 16GA/.065" for Car Modified Exhaust Elbow Pipe, Stair Handrail, Exhaust System

  • 2.5" Mandrel bend elbow suits for exhaust system, intake system, sanitary pipe connection, car modified exhaust elbow pipe, stair handrail, etc..
  • 4 Pack x 2.5” Stainless Steel Mandrel Bend Elbow 90 Degree Bend Elbow..
Check Stock

NDS 422G 4' Pop Up Drainage Emitter with Elbow, 4 Inch, Color may vary

  • Works with a complete drainage system to release collected stormwater runoff and standing water to a discharge point before it causes costly property damage. Provides collected water a point of release at water-safe areas downstream and away from structures, erosion-prone landscapes, and poor drainage areas.
  • Elbow connects to 4 in. sewer and drain pipe, no fitting necessary.
  • connects to other pipe types using appropriate adapters. Releases collected water up to 40 GPM. Supports pedestrian traffic including lawn tractors, when properly installed.
  • Pop-Up Drainage Emitter comes with elbow securely attached for an easier install. Outside flange prevents grass from growing over the cover.
  • Cap, or cover, pops up as high as 1 in. once water pressure builds.
  • closes as flow diminishes. Small weep hole in elbow drains out any water in the pipe to prevent stagnation or freezing in cold weather.
Check Stock

18Pack 3-Way Elbow PVC Fittings, 3/4Inch PVC Fittings, 3 Way PVC Elbow Side Outlet Tees, 90 Degree Elbow Corner Fittings for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • 3-Way Elbow PVC Fittings——The Elbow fittings are Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building sturdy cornet joint, such as dog beds and garden project.
  • 3/4Inch Elbow PVC Fittings——Package include 18pcs 3/4inch PVC connectors, fits externally over 3/4” size PVC pipe, which has actual OD 1-1/16” or 1.050” and an inside diameter of 3/4”(Sch.40 or Sch.80 PVC pipe.
  • Professional Performance 3-Way Tee——90 Degree Elbow is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • Impact Proof——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——3-way Corner fittings are a quick and handy solution for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

Stainless 2.5" 90 Degree Mandrel Bend Elbow - 14GA/.078" Wall - 1.5" Leg - SS304 Stainless Steel Exhaust Elbow Piping for Car Exhaust Pipe Modified, Stair Handrail, etc - KOTVTM

  • 【Material】: SS304 Stainless Steel 90° Exhaust Pipe Elbow, Stainless steel elbows that are resistant to high temperatures, oxidation, and rust (can be welded to 2.5 inches outside diameter pipe) for car exhaust pipe modified, stair handrail, etc.
  • 【OD】: 2.5"/63mm, The outer diameter of the elbow is 2.5". Height（L): 5.51"/140mm.
  • 【Quantity】: Single Elbow. 100% brand new.
Check Stock

Ironwerks Designs 1/2\ Street Elbow, 90 Degree Black Pipe Fittings - Decorative Pipe Décor, Metal Pipe Furniture [10 Pack]

  • 10 PACK MALLEABLE IRON 90 DEGREE ELBOW: This black pipe elbow is constructed of high-quality iron.
  • DIY HOME IMPROVEMENT: Perfect for building a pipe shelf bracket or any other decorative pipe décor.
  • VARIETY OF STYLES: Easily pair with tons of styles.
  • industrial, rustic, modern, minimalist, and more.
  • AUTHENTIC RAW IRON: Each pipe fitting is made with raw, unfinished iron. Clean before installation.
  • CRAFTED BY THE EXPERTS: Committed to providing an outstanding customer experience every single time.
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

  • End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
  • Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
  • Natural rubber O-ring for excellent expansion and memory.
  • Plug is rated for 17 PSI or 40-ft of head pressure.
  • End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
  • Galvanized carriage bolt to prevent corrosion.
  • Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
  • Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
  • Plastic mechanical plugs are premium plugs designed to hold higher pressures.
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock

15Pack 3/4Inch 4 Way PVC Fittings, Heavy Duty PVC Elbow Side Outlet Tees, Furniture PVC Tee Corner Fittings for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • 4 Way PVC Fittings——The PVC Elbow are made Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building PVC furniture, such as dog beds and garden project.
  • 3/4Inch PVC Elbow Fittings——Package include 15pcs 3/4inch PVC connectors, fits externally over 3/4” size PVC pipe, which has actual OD 1-1/16” or 1.050” and an inside diameter of 3/4”(Sch.40 or Sch.80 PVC pipe.
  • Professional Performance 4-way Tee——90 Degree Elbow is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • Impact Proof——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——4-way Corner fittings are a quick and handy solution for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe sc....
Check Stock

SDTC Tech 1/2

  • FEATURE: Structural PVC Elbow Fitting has tapered edges and glossy surface, nice for display items such as DIY furnitures..
  • PVC CONNECTORS: 3 Way and 4 Way Heavy Duty PVC Pipe Elbow Fitting Kit, ideal for edge, corner and center connections, resistant to frost and corrosion, long service life..
  • MATERIAL: High quality SCH 40 PVC Fittings, can withstand impacts or drop from a substantial height, and won’t suffer any cracks or breakage..
  • SIZE: Fit 1/2 inch PVC pipe, PVC Connector for Center Connections, white finish with tapered sockets for a professional design..
  • APPLICATION: Furniture-Grade Parts, suitable for build shelves, pool products, chairs, desks, storage frames, garden support structure etc..
Check Stock