Top Galvanized Roofing Nails

The Hillman Group 42041 Galvanized Roofing Nails, 1-Inch, 100-Pack

HILLMAN FASTENERS 461463 2\ x 11 Gauge Fasn-Rite Electro Galvanized Roofing Nails

• The product is 2" x 11 Gauge, Fasn-Rite Electro Galvanized, Roofing Nails.
• Product Dimension: 1.0"L x 3.3"W x 4.5"H.

STINGER 0136260 NailPac Cap Nails - 1 Electro Galvanized Nails with 1 Plastic Collated Caps 0136260 for use with CN100B & CN100 Cap Nailers

• SUPERIOR HOLDING POWER - 1” (25mm) plastic collated caps and 1”x.083” (25mmx2.1mm) full round head ring shank nails holds underlayment securely.
• EASY RELOADS - Contains 10 reels of 200 collated plastic caps and 10 coils of 200 nails which covers 25 square.
• WHERe TO USE - Use corrosion-resistant electro galvanized nails in areas more than 3,000 ft (914m) from saltwater.
• MEETS ASTM REQUIREMENTS - Cap nails meet ASTM F1667 requirements and exceed ASTM D3161 and D7869-17 for wind and UV resistance.
• BEST PRACTICE UNDERLAYMENT FASTENER - Use exclusively with STINGER CN100B for the best practice installation of roofing underlayment.

BOSTITCH CR2DGAL 1-Inch 15 Degree Smooth Shank Coil Roofing Nails (7,200 per Box)

• For Use in the Bostitch RN46-1 Industrial Roofing Nailer.

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

• #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
• 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
• Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
• Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.

findmall 3600 Count Coil Roofing Nails 7/8-Inch x .120-Inch 15-Degree Round Head Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails for Roofs Lathing and Sheathing Materials

• Material - The roll nails are made of galvanized materials and are not easy to rust..
• Structural Features - 15-Degree Ring Shank..
• Size - Measures 7/8 inch in length by 0.120 inch in diameter..
• Application - Wire collated nails are used for both new roofs and reroofing, also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding..
• Package - You will receive 3600 pieces Siding Nails in a pack..

findmall 7200 Count Coil Roofing Nails 1-3/4-Inch x .120-Inch 15-Degree Round Head Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails for Roofs Lathing and Sheathing Materials

• Material - The roll nails are made of galvanized materials and are not easy to rust..
• Structural Features - 15-Degree Ring Shank..
• Size - Measures 1-3/4 inch in length by 0.120 inch in diameter..
• Application - Wire collated nails are used for both new roofs and reroofing, also for attaching waterproof tar paper, roofing felt, metal drip edges, insulation board, cementitious fiber board products and vinyl siding..
• Package - You will receive 7200 pieces Siding Nails in a pack..

Metal Roofing Screw: (250) 12 x 1-1/2' ZINC Hex ReGrip Sheet Metal Roof Screw. Sharp Point Metal to Wood siding Screws. 9/16' EPDM Washer.

• 5/16" Hex Head - ~9/16" EPDM washer - .216" Shaft (#12) Width .625" - Length 1-1/2" Under Head.
• ReGrip Screws designed to replace screws or nails that have failed, loose and cannot be tightened.
• These screws should be used when replacing smaller nails or screws in roofing or siding projects.
• Galvanized Screws are Grey in color due to the galvanizing process (no paint).
• Due to error in Manufacturing Process you may receive these with a 1/4" Head and 5/8" EPDM washer..

Grip-Rite GRCR3DGAL 1-1/4-Inch-by-15-Degree Galvanized Coil Roofing Nail (7,200 per Box)

• 1-1/4-by-.120-by-3/8-inch diameter thin flat head.
• "High Wire" collation compatible with most tools.

Grip-Rite GRCR2DCGAL 7/8-Inch by 15-Degree Wire Collated Galvanized Coil Roofing Nail (7,200 per Box)

• 7/8" x .120" x 3/8" Diameter Thin Flat Head.
• "High Wire" Collation Compatible with Most Tools.
• Use with Grip-Rite GRTCR175 Coil Roofing Nailer.

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

• [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
• [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
• [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
• [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
• [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..

SITLDY Heavy Duty T50 Staples and 18GA Brad Nails, 2400-Count 6 Sizes Includes: 5/16', 3/8', 1/2', 9/16' T50 Staples and 3/8', 1/2' Brad Nails Assorted, Galvanized

• T-Shape & Chisel point type: the T-shaped head and Chisel point type help you push the nail out more accurately and conveniently..
• Rust & corrosion resistance: Galvanized surface can block rust and corrosion resistance..
• Universal Size: 20 gauge Standard T50 staples and 18 gauge brad nails are generally suitable for most manual, electric, pneumatic staple guns..
• Wide applications: It is ideal choice for light-duty to heavy-duty stapling jobs such as housing insulation&wrap, roofing felt, fence wiring, weather stripping, carpet under laying, upholstery, DIY and craft materials.
• Total quantity: There are 2400 pieces T50 staples and 18 gauge brad nails with 6 different sizes in the package, T50 staples: 5/16″-400, 3/8″-400, 1/2″-400, 9/16″-400.
• 18 gauge brad nails: 3/8″-400, 1/2″-400. You can choose different sizes of nails according to actual needs..