Top Galvanized Winches

DC Cargo Mall Four Weld-On Winches for Flatbed Trailer | Heavy Duty Standard Tie-Down Winches

  • USE FOR TOUGHEST LOADS – Trust these four (4) robust flatbed winches to hold your load tight even when your truck meets a rough road. Heavy-duty steel winches apply strong tension to the strap to hold the toughest loads. Powder-coated for long-lasting corrosion resistance..
  • PERMANENT INSTALLATION – Weld-on winches provide a permanent tie-down system for your truck or trailer..
  • PRECISION ENGINEERED: Bottom mount. Standard profile fits up to 30 ft of strap. Fits winch straps up to 4 inches. Dimensions: 5.5” tall x 3.5“ wide x 8” long..
  • EVERYTHING YOU NEED IN A TIE DOWN WINCH – Strong, reliable, and corrosion-resistant. Includes (4) winches. Assembly break strength: 16,500 lbs. Working load limit: 5,500 lbs..
  • Tie-downs meet or exceed DOT requirements..
Check Stock

AUTOBOTS Bow Shackles 3/4 D Ring Shackle 2 Pack 48,000Ib Break Strength with 7/8 Pin 2 Isolator and 4 Washers Kit for Offroad Jeep Vehicle Truck Recovery Red

  • 【SOLID & HEAVY DUTY】- AUTOBOTS 3/4 Inch D Rings Shackle with 7/8 Screw Pin and Isolator Washer Kits to Make It More Stability. Our Shackles is....
  • 【MATCHING KITS】- Our 3/4 Shackle is Equipped with 2 Isolators and 4 Washer Kits, Which Act As an Additional Bumper to Reduce Friction Between....
  • 【DOUBLE PROTECTION】-it is Electro-galvanized and Powder Anti-rust Coated, Which Makes the Clevis Shackle More Strong and Durable and Can....
  • 【PERFECT OFFROAD ACCESSORIES】- Our Shackle is Perfect for Most Off-road Vehicles, Jeeps, Trucks, Perfectly Matched with Winches, Tow Straps, Tree....
  • 【100% SATISFACTION GUARANTEE】- We Provide the Best D Shackle,Wonderful Packaging, Cushioned Box,Fast shipping and Best Services, Any....
Check Stock

Rough Country Black Universal Winch Cover Logo - RS106

  • UV treated, protect Winches from sun damage. Made of durable polyester, solid and durable, have long time service.
  • Waterproof protect your Winches are intact from rain, water damage..
  • Cover Size: 58 X 26 X 18 cm (23 X 10 X 7 inch)..
  • For most winches in the 8,000 to 17,500 pound capacity range..
  • Made of Heavy 600 Denier Oxford textile, Durable, Heavy Duty and Deluxe.
  • Protects against rain, snow, sun, bird poop, tree sap and dirt and won't crack in cold weather..
Check Stock

Winch Cover, 8000-10000 lbs Winches, Black Neoprene for Off-roading 4x4

  • Compatibility:(LxWxH)23.5” x 9.5” x 7.5”. Check your winches dimensions for proper fit. It can be used for a variety of winches in the 8,000 to the 13,000-pound capacity range..
  • Protection: Made of oxford fabric which is water-resistant, dust-proof. This winch cover for electric winches can against stains, dirt, and moisture that can gather due to rain, snow, hail, etc. UV resistant design..
  • Resistant:Made of premium hydrophobic material and bound edges give full protection for the cover from cracking.Keep your electric winch in neat and perfect condition, protecting it from water, dust or anything else that could harm it..
  • Speciality:Unique fluorescent material.It absorbs light at night, and the STEGODON logo glows in fluorescent colors.This will definitely make you the most watched person of the night..
  • All winches accessories come backed by a lifetime technical support and one-year limited warranty.If there is any problem during the purchase period, please contact us at any time, and we will provide the most professional and timely service..
Check Stock

KEEPER - 36” Winch Bar Chrome - Use with Bolt-On or Weld Style Deep Storage Winch

  • Winch Bar is designed to use with bolt-on or weld style deep storage winches to tighten the winch strap and release load binder.
  • Additional Features: Features a knurled non-slip handle and a tapered, angled grooved tip for a secured easy handling and operation.
  • Ease of Use: Winch bar has a tapered, angled end for easy operation.
  • Operation: Easily releases load binders and tension winches.
  • Compatibility: Compatible with Keeper model #04928 weld mount trailer winch and other standard weld mount trailer winches.
Check Stock

QWORK 12V 250A Winch Solenoid Relay Contactor for AUT UTV 3000-5000lbs Winch

  • 【High Quality】 Made of high-quality silver alloy steel with good weather resistance and electrical conductivity for long-time use..
  • 【OEM reference】63070, 62135, 74900, 2875714, 70715.Voltage: 12V,power – 250A. Works with most brands of ATV/UTV winches..
  • 【Applications】It could be used at all 12 volt solenoid operated winches, such as ATV’S, UTV’S, SUV’S ,4x4 vehicles and other most brands of recovery winches like 12 Volt lift jack, hydraulic pump, Trailer etc.
  • 【Special Design】 The surface is black and smooth ,coated with black powder for great durability, and has a comfortable touch..
  • 【100% Satisfied Service】 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

AC-DK 12V 2000-lb. ATV/UTV Electric Winch, Off-Road Steel Cable Winch for Trailer Boat RV Towing Winches, ATV/UTV Winch with Big Yellow Wired Remote and Winch Mounting Plate

  • ...inch powered by a 0.82kw/1.1hp output permanent magnet DC 12V motor, provide more sufficient power and stable output, and reduce the problem of winch damage or winch burning due to insufficient power. Efficiency: 2.9 feet /min when fully loaded, 10.5 feet /min when empty..
  • GALVANIZED STEEL WIRE ROPE: Cable diameter length: 3/16" X 50', the surface is galvanized, which is not easy to rust and has a longer service life than other ordinary steel cables. With 4-way roller fairlead, allows you to pull from wider angles which can effectively reduce the excessive wear on the steel rope of the winch..
Check Stock

Die-matic Short Nose Adjustable Winch Stand W/ 1400lb Dutton- Lainson Winch (Galvanized)

  • Size- Width 2" Length: 20', Rated Capacity: 4500 lb.Perfect for winch strap replacement..
  • High quality- using high-quality industrial webbing, reinforced hooks, after thousands of tests before leaving the factory, it can be used more safely..
  • You can use it to easily put the boat on the trailer, tilt the boat slightly, and then drag the car. The standard 2 inch width is suitable for most winches, and can be used for manual winches and electric winches. It is ideal for a 20-ft bass boat..
  • Durable-It uses ultra-strong polyester and metals.Corrosion resistance: seawater corrosion resistance and rust resistance..
  • Rust-proof- High-quality hooks can easily tow the boat, allowing you to use it safely..
Check Stock

WARN 90287 Winch Component Accessory: Wireless Remote Control System for Truck and SUV Winches with 5 Wire Electrical System

  • 【High Quality】 Made of high-quality silver alloy steel with good weather resistance and electrical conductivity for long-time use..
  • 【OEM reference】63070, 62135, 74900, 2875714, 70715.Voltage: 12V,power – 250A. Works with most brands of ATV/UTV winches..
  • 【Applications】It could be used at all 12 volt solenoid operated winches, such as ATV’S, UTV’S, SUV’S ,4x4 vehicles and other most brands of recovery winches like 12 Volt lift jack, hydraulic pump, Trailer etc.
  • 【Special Design】 The surface is black and smooth ,coated with black powder for great durability, and has a comfortable touch..
  • 【100% Satisfied Service】 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

Mega Cargo Control (4 - Pack) Yellow Tie Down Straps | 4\ x 30' Heavy Duty Tie-Down Winch Strap with Flat Hooks | for Flat Bed, Truck, Farm, Utility Trailers

  • ...The perfect solution for your transportation needs..
  • ⭐QUALITY COMPONENT- Correct metal for the right component, all our raw materials have been tested with correct hardness and tensile strength. Followed by the professional-grade heat treatment process to make sure all the hardware meets its required strength. The galvanized/zinc/paint coating process gives the product a nice finish with weather resistant. Hardware color may vary. Galvanized, Zinc, or Painted..
  • ⭐SAFE AND PROFESSIONAL- We have over 25 years of experience as the leading manufacturer in the industry, USA-based manufacturer and seller in California. With hundreds of products to choose from with high-quality and competitive prices.All our products meet or exceed all CVSA and DOT specifications. With a 100% return policy, fast and Safe & Secure shipping with FBA or USPS/ FEDEX/UPS..
Check Stock

Winch Cover,Waterproof Winch Dust Cover,Heavy Duty Winch Protective Cover with Drawstring,Weather Resistant Dust Cover for Electric Winches 8000-10000 lbs(8000-10000lbs Winch Cover)

  • ⊰ 100% Brand-New,all Parts are Tested and Quality Controlled Prior to Shipment..
  • ⊰ Cover Size: 58 X 26 X 18 cm (23 X 10 X 7 inch).
  • For most winches in the 8,000 to 17,500 pound capacity range..
  • ⊰ UV treated, protect Winches from sun damage. Made of durable polyester, solid and durable, have long time service.
  • Waterproof protect your Winches are intact from rain, water damage..
  • ⊰ Made of Heavy 600 Denier Oxford textile, Durable, Heavy Duty and Deluxe.
  • Protects against rain, snow, sun, bird poop, tree sap and dirt and won't crack in cold weather..
Check Stock

SuperATV Winch Mounting Plate for Can-Am Maverick X3 (See Fitment) | Replaces Stock Bulkhead and Front Deflector | Powder Coated for Durability

  • ...See product description for complete fitment list) | Does not include frame stiffener | Instructions are electronic only - Access via QR Code on Shipping Pack List or on Manufacturer's Site.
  • 【Machine Specific Mounting Plate】The Maverick Winch Mount has a bolt pattern for the majority of aftermarket 3500-6000 lb. winches. This includes Warn, Superwinch, and OEM winches. | Mounting Holes: 76mm x 169mm (3" x 6 5/8") / 76mm x 124mm (3" x 4 7/8") | Fairlead Bolt Pattern: 109mm (4.29") / 152mm (5.98") | Mounts Behind: Factory Can-Am Maverick X3 Bumper and Can-Am Maverick X3 Front Bumper.
  • 【 Powder-Coated Steel Construction】SuperATV's Canam Maverick X3 Winch Mounts are manufactured out of heavy gauge steel and powder coated black for a long-lasting finish..
  • 【 Built for Black Ops Winches】SuperATV's X3 Winch Mount gives you a secure and unbreakable mounting point for SuperATV Black Ops Winches. A strong mount is just as important as a strong winch—don’t get caught with a mount that can’t take the weight of your machine..
  • 【100% Fit Guaranteed】 SuperATV is a family-owned business and we take product quality seriously. We design and test all our Maverick X3 Accessories in our half-million square foot facility in Madison, Indiana. Order your Can ....
Check Stock