Top Gang Type Cnc Lathe

RazoRock Baby Smooth Double Edge Safety Razor

  • Build: CNC machined head (billet), CNC lathe turned handle (rod).
  • Complete Length : ~ 98 mm, Handle Length: 90 mm, Handle Diameter: 13 mm.
Check Stock

BestEquip Indexable Carbide Lathe Tools 1/2" Metal Lathe Cutting Tools 7 Pcs/Set Indexable lathe tools Super-Hard 40CR Lathe Bits Carbide Lathe Tool for Lathe Black Compact and Portable

  • Indexable &Sharp Inserts: 90°, 93°, 55°&95°carbide lathe inserts allow this lathe threading tool cutting with more flexibility and utility. Sharp,straight and even ccmt inserts can ensure high precision cutting..
  • Super-Hard 40CR Body: 40CR material of these lathe cutting tools has much higher hardness, so stable cutting is achieved due to its superior toughness and crack resistance..
  • Additional Subassemblies: This Lathe tool set comes with 2 installation wrenches in different type:3mm Allen wrench and T15 box spanner. A set of assembly screws and one 95°CCMT09T304 blade are free to provide much convenience to lengthen the service life of these metal lathe cutting tools..
  • Extensive Use: These metal lathe tools can be applied to digital-controlled lathe with various sizes, processin....
Check Stock

Power Tool Essentials - The Drill Press & Mortiser

  • IP66 Water Proof: Led Work light is made of high-quality aluminum alloy light head, Added water proof rubber ring, It can protect against the water spray generated by the machine..
  • Power and voltage: Input voltage range is 110 to 220V, of course can input 120V.
  • 120 LEDs,30W luminous flux is 3000 lumens, longer life than halogen lamps, more energy saving..
  • Flexible bracket: Two-section aluminum alloy bracket, approximately 20 inches in length, with three rotatable nodes that adjust the direction of illumination..
  • Mounting type: fixed by four screws and equipped with mounting parts to make it more stable and safer. Hole diameter 5mm (0.2 inch).
  • Scope of application: Suitable for all types of machine tools, Such as CNC, Punching, Lathe, Drilling machine, Car repair shop, Equipment, Machinery workshop, Woodworking workbench, Sewing machine..
Check Stock

ZRM&E 5PCS 20 Teeth 5mm GT2 Timing Belt Pulley for Width 6mm 3D Printer Parts Accessory

  • Type: 5pcs GT2 Timing Belt Pulley, Come with 1 hex wrench, and matched M4 fastening screw, which has been already screwed in the pulley..
  • High Quality: Adopt high quality aluminum, excellently machined, finished smoothly, durable to use, perfect choice for 3D printer or similar projects..
  • Specification: 20 teeth, 5mm inner bore, 16mm height, fit for 6mm width GT2 timing belt and 5mm shaft stepper motor..
  • Special Design: Rounded teeth can engage with belt longer, flange design admits synchronizing shaft rotations, provides a smoother and high power transmission..
  • Application: Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-100L)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

HJ Garden 2pcs 16 Teeth 3mm Bore Idler Timing Pulley with Bearing 2GT Aluminium Alloy H Type GT2 Synchronous Wheel Without Teeth for 6mm Width Belt 3D Printer CNC Mechanical Drive Black

  • 2pcs Black GT2 16 Teeth H Type Idler Timing Pulley, Fit for 6mm Width Timing Belt.
  • Inner Bore: 3mm, Teeth Width: 6.5mm, Overall Height: 8.5mm, Outer Diameter 13mm, Type: Smooth without teeth.
  • Made from high quality aluminum alloy, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion resistant, more beautiful and durable..
  • Each idler timing pulley has double bearings, to ensure the machine runs well..
  • Widely used in milling machine, gear forming machine, drilling machine, CNC lathe, hobbing machine or other mechanical transmission occasions..
Check Stock

Mechanical Tool Aluminum Alloy Synchronous Wheel XL Type 25 Teeth Power Transmission Accessories for Milling Machine for Drilling Machine for CNC Engine Lathe(25 Teeth 5mm Hole XL synchronous Wheel)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

【The Best Deal】OriGlam Mist Coolant Mist Lubrication, Spray System Unit Used for CNC Lathe Milling Drill Machine

  • √ Multi-function – Set multi function all in one,cooling,lubrication and blowing the metal chips, gas processing chips are blown away, working safer..
  • √ Great Value – Save 60-80% lubricants compared with the oldest lubrication tube..
  • √ Easy Operation – Engraving machine spray cooling,Special design,direction of rotation,easy to operate..
  • √ Long-term Use – Standard fixing device,fine spray port, long life. Cooling stone/metal/ceramic tile engraving machine..
  • √ Widely Used – Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing..
Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

  • 【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
  • Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
  • 【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
  • 【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
  • 2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
  • 【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
  • 【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..
Check Stock

Wish You Were Here

  • ...ggle Switch For Compatible with Delta Table Saw.
  • ⭐REPLACES NUMBE:Compatible with 31-695 Type 2 Sander 31-780 Type 1 Sander SA180 Type 1 Belt/Disc Sander 22-540 Type 1 12 inch Planer 22-560 Type 1 Planer 22-565 Type 1 Planer 28-150 Type 2 Band Saw 23-675 Type 1 Grinder / Finisher 14-650 Type 1 Mortiser LA200 Type 1 Lathe 31-325 Type 1 Grinder/Sander TS300 Type 2 Bench Table Saw TS350 Type 1 Bench Table Saw SH100 Type 1 Bench Shaper AP300 Type 2 Air Collector Management SA180 Type 2 Stationary Sander 34-670 Type 2 10 Inch Table Saw JT360 6".
  • ⭐WORKS FOR BRANDS: Compatible with GR450 Type 1 8" 1 6"Tool-less Quick Change Variable-Speed Grinder TP305 12-1/2" Portable Planer DP300L 12" Crosshair Laser Drill Press 17-900 Type 2 16-1/2" Drill Press 36-600 Type 2 Table Saw 50-075 Type 1 Single Stage Collector 50-665 Type 1 1.5Hp 2 Stg Collector 14-070 Type 1 14" Floor Drill Press DP200 Type 1 10" Drill Press DP400 Type 1 Drill Press GR250 Type 1 6" Bench Grinder with Lamp 46-250 Type 2 Midi-Lathe 36-610 Type 2 Table Saw 36-380 Type 1 Xl-10.
  • ⭐Specifications: Voltage: 125/250V Amperage: 20/12A Terminals: Two,On-Off Toggle Switch replaces Compatible with Delta 489105-00, 1343758 (Optional Lock).On-Off Toggle Switch replaces Compatible with Delta 489105-00, 134....
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

SainSmart Genmitsu 7Pcs ER11 Spring Collet Set for CNC Engraving Milling Lathe Tool 1.0mm-7.0mm

  • ➤7Pcs ER11 Collet Set Gripping Range: 1mm to 7mm (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm).
  • ➤Perfect for CNC milling lathe tool and work-holding engraving machine. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock