Top Gas Brass Valve

EZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack

  • 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/4" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

EZ-FLO 1/4 Inch OD Self Tapping Saddle Valve Brass 65801LF

  • ICE MAKER SADDLE VALVE KIT: Quick connect saddle valve kit provides everything you need to supply liquid where a low volume, low pressure stream is....
  • SIZE: This natural gas saddle valve supports 3/8 inch to 1-5/16 inch OD (outside diameter) tube, and features a 1/4 inch OD (outside diameter)....
  • CERTIFIED: This drain saddle valve is certified lead free, making it suitable and safe for all potable water supply installations.
  • DURABLE: Self piercing saddle valve is composed of heavy duty brass metal for long-lasting reliability.
  • EASY INSTALLATION: This brass saddle tap valve comes already assembled with a captive sleeve, which puts even pressure on the tubing, ensuring a tight....
Check Stock

Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit, with Thermocouple Knob Switch with 5/8''-18UNF Flare Inlet & Outlet Replacement for Gas Grill Heater Fire Pit

  • WIDE COMPATIBILITY --- The propane lpg gas fire pit control safety valve kit is suitable for gas grill, heater, fire pit, fireplace if same connections. IT'S LOW PRESSURE PROPANE ONLY..
  • EASY INSTALLATION --- This low pressure LPG propane gas fireplace fire pit flame failure safety control valve kit is easy to install, install vertically at the opening of the device container..
  • PREMIUM QUALITY --- The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use..
  • DEMENSION --- Flame failure valve with inlet and outlet with Flare thread 5/8’’-18UNF, 750mm thermocouple with M8*1 threaded head..
  • 1 YEAR WARRANTY --- This gas fire pit control valve replacement parts complete with 1-Year limited warranty, should be there any question, please feel free to contact us..
Check Stock

Coleman Propane Fuel, 16 oz, Propane Camping Cylinde 4-Pack

  • DIMENSIONS: 11.8"x1.1"x1.1"/30cmx2.8cmx2.8cm.
  • MATERIAL: Super Duralumin, Brass, Stainless, Rubber.
  • USES: Convert EN417 Lindal Valve Canister to the one can be used on Propane Stove, very efficient. It is a useful tool for your camping, backpacking, hunting, BBQ, barbecue and other outdoor occasions..
  • FEATURES: *OUTDOOR USE ONLY* ①The adapter can connect EN417 Lindal Valve Canister (screw-on type) to propane gas device(burner,stove,lantern,etc..), and it is equiped with regulating valve for gas flow rate adjustment. ②Extend hose can keep your propane tank farther away from gas device, which is more convenient to use. ③Package include: 1 * Propane Stove Adapter with Extend Hose(11.8""/30cm) Z29-30.
Check Stock

Coleman RoadTrip Swaptop Aluminum Grill Griddle, Full Size , black

  • [REFILL ADAPTER]: With this adapter, you can transfer the liquefied gas from one lindal valve cylinder to another lindal valve cylinder..
  • [VENT VALVE]: Empty the gas tank to recycle/dispose..
  • [MATERIAL]: Super Duralumin, Brass, Rubber..
  • [SIZE AND WEIGHT]: Folded: 1.8x1.4x0.6in(45*16*35mm), unfolded: 3.7x1.4x0.6in(94*16*35mm), weight: 0.07lb/36g. It is lightweight and easy to carry..
  • [PACKAGE MCLUDE]: Only 1xZ15 Adapter. The rest of the products in the picture are not included..
Check Stock

Honeywell SV9501M2726 Upgraded Replacement for Furnace Smart Gas Valve

  • Fits 1/4" and 5/16" Dante gas valve stems.
Check Stock

Set

  • 1.Material: Heavy Duty Beer Regulator, Brass Body Chrome Plate Finish, anti-Corrosion, Two pcs of Washer and Hose Clamps will guarantee no Leak Problem.
  • 2.The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg.
  • 3.PERA Beer Keg Regulator with CGA-320 valve can be connected to American CO2 Tank, it is convenience used in Commercial Environments like Beer Bars, Restaurants, if you like home brewing, it is a best brewing tools.
  • 4.With 45 PSI safety relief valve and gas shut-off valve, it will be more safe and more precise control when making small adjustments to the output pressure.
  • 5.Guarantee: Quality Guarantee, any problem for the Beer Keg Gas Regulator, Money Back or Replacement free..
Check Stock

T6 Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with Thermocouple and Knob Switch（3/8\ Flare Inlet & Outlet）, Suitable for Gas Grill, Heater, Fire Pit

  • Low Working Pressure Max 1/2 PSI（65mbar）,CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread.
  • Valve Spindle "D" Shaft for 6mm Knob,With M15 Nut to Fix on your Panel Plate.
  • Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000).
  • Material: The fire pit gas control valve kit is made of high quality brass material with heavy-duty construction for durable use..
  • Application: The propane lpg gas fire pit control safety valve kit is suitable for gas grill, heater, fire pit, fireplace if same connections. IT'S LOW PRESSURE PROPANE ONLY..
Check Stock

Campbell Check Valve Quiet CLR1.5 by Brady MfrPartNo 0823-15C, White

  • This valve is used to prevent the back flow of fluids.
  • Maximum pressure rating 200 psi，200 WOG (water, Oil, gas).
  • This valve has a brass body with a stainless steel spring for long-lasting durability.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock

Honeywell, Inc. M6435A1004 Spring Return Cartridge Globe Valve Actuator, Floating, SPDT

  • Inline globe valve with non-rising stem for on/off actuation and flow control (throttling) in a pipeline.
  • Bronze valve body for higher strength and corrosion resistance than brass.
  • Brass stem and disc for higher corrosion resistance than steel.
  • Female National Pipe Taper (NPT) threads for connecting to male threaded pipes.
  • 200 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and 125 psig for steam working pressure (SWP).
  • Product contains brass which does not meet federal and state requirements for drinking water..
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock