Top Gas Check Valve

EVIL ENERGY 3/8" Fuel Check Valve One Way Inline Non Return Diesel Gasoline Silver(10mm OD,2PCS)

  • Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring..
  • Size: 3/8inch (10mm) OD check valve can be work with 3/8 inch ID fuel hose..
  • Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉..
  • Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended).
  • Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems..
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ...ng materials, and preheat metals for welding and soldering.
  • The lengthy torch and hose allow you to work safely and easily in hard to reach areas.
  • [Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6....
Check Stock

Valterra P23415LF 1/2\ Lead-Free Check Valve

  • Made of PVDF material, safe and non-toxic, can be used for a long time..
  • This check valve effectively prevents flow back of liquid or gas in the line..
  • Suitable for water, petrol, oil, and other fluids..
  • This check valve is simple in design and compact in size for easy installation, making maintenance easier and more efficient..
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • ... thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
  • 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
  • Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
  • Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
  • Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
  • Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
  • Also it has quarter-turn, and the double-seal system allows flow to go in either dir....
Check Stock

Uenhoy 5 Pcs 3/8" Check Valve 10mm Plastic Check Valve One Way Valve Non Return Check Valve for Fuel Gas Air Liquid

  • Material & Dimension -- The 3/8" check valve is made of high quality PP material, wear resistant, rust resistant, not easy to break, durable. The check valve measures 43.4mm/1.7" in full length and 10mm/0.39" in diameter..
  • Advantage -- The gas check valve is designed with a pagoda shaped card slot, non-toxic, non-slip, with strong adsorption performance and good air tightness..
  • Performance -- Working tempeture: -30 ℃ - 140 ℃. Under 80 ℃, has strong resistance to acid, alkali, salt and good corrosion resistance to organic solvent..
  • Application -- The one way check valve is applied for fluid system to prevent fluid from flowing backward, or for pneumatic system to prevent reverse flow of compressed air. Widely used in automotive parts, machinery industry, agriculture, household appliances, etc..
  • Satisfactory After-Sales Service -- Uenhoy is devoted to providing high quality service. Please feel free to contact us if the item has any quality problem. Your satisfaction is our biggest power..
Check Stock

HASMX 5140186-73 / E101362 Air Compressor Check Valve Replacement 90 Degree Left Valve for Select Craftsman, Porter Cable, and Husky Models, Black and Decker Part Number E101362 (1-Pack)

  • GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7 30 scfm Rating.
  • Unloader valve (continuous run unloader) for gas & electric powered air compressors.
  • 145-175 factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" COMPRESSION TOP Inlet x 1/2" MALE Pipe Thread outlet..
Check Stock

Idol Pleasures

  • melt ice snow off steps, sidewalks, driveways.
  • remove paint, grease, plastic from metal, concrete and other non-flammable objects.
  • 【EASY TO USE – PROPANE WEED TORCH】①: Connect the weed torch up to any refillable propane tank.
  • ②: slowly loosen the gas tank valve and check for leaks.
  • ③: Slightly loosen the propane blow torch flow valve and ignite directly at the nozzle.
  • ④: adjust the blow torch flow valve to reach the desired temperature. ⑤ notice: After use the propane weed torch, close the gas tank valve, Hang in a dry place for storage..
  • 【COMPLETE WEED BURNER PROPANE TORCH KIT】includes 1 * Propane Torch flame thrower, 1 * 6.5 Ft 300 PSI explosion-proof Hose(POL safety valve), 3 * stainless steelhead, 3 * clip.
  • BTU Rating: 500,000 btu. Highest Welding temperature: 3000℉.
  • 【QUALITY ASSURANCE】100% brand new propane torch flamethrower, 1 Year Warranty, Buy with confidence! If problem in the year quality warranty time, pls not hesitate to contact us for a free and easy replacement or refund..
Check Stock

CO2 Distributor Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold, Co2 Air Manifold, Kegerator Splitter, 2-way Kegerator Distributor Manifold 1/4" with Integrated Check Valves by MRbrew

  • ...e use in our Kegging kits. LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. It contains a brass cock valve with a check valve. Check valves are very important to keep the beer from backflowing into your system!.
  • Has predrilled Holes for mounting and you can expand the unit by removing plug and adding an additional valve or additional manifold, so it grows with your system. This manifold features output and input barbs made for 1/4″ Inner Diameter tubing.
  • We have a Satisfaction Guarantee. Letting you know that you have a free replacement or full refund in the case of you being unsatisfied with any part of your Gas Distributor. Without you having to go to the post office or pay for postage in every case..
Check Stock

10 Pack 1/4 inch Plastic Check Valve One Way Barb Hose Inline Non Return For Fuel Oil Water Air 1/4 inch

  • Made of PVDF material, safe and non-toxic, can be used for a long time..
  • This check valve effectively prevents flow back of liquid or gas in the line..
  • Suitable for water, petrol, oil, and other fluids..
  • This check valve is simple in design and compact in size for easy installation, making maintenance easier and more efficient..
Check Stock

Stainless Steel SS316 NPT 2 Swing Check Valve WOG 200 PSI PN16 CF8M

  • Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
  • Working Pressure 200 WOG,Port Types:Female x Female threaded.
  • Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
  • Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
  • Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

Watts VAGV075 3/4 Inch Earthquake Gas Shutoff Valve

  • WATTS EARTHQUAKE GAS SHUT OFF VALVE: Automatically shuts of gas in the event of an earthquake..
  • NATURAL GAS EARTHQUAKE SHUT OFF VALVE: Reduce property destruction from earthquake related gas fires..
  • EASY TO INSTALL GAS METER EARTHQUAKE SHUT OFF VALVE: Save time and energy during installation due to its lightweight, compact design..
  • BEST SELLING EARTHQUAKE SHUT OFF GAS VALVE: Maximum pressure is 10 PSI, fits standard NPT..
Check Stock