Top Gas Cylinder Steel Pipe

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • ...are x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It....
Check Stock

Weller Mini Butane Torch - WLTBUM2

  • ...y Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can up to 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Use】 Install the end of the welding torch on the gas cylinder, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Ergonomic Design 】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Operation And Tips】Use only MAPP and propane gas.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • Before attaching torch to gas cylinder,check and make sure the valve is switched "off" by turning knob in the clockwise direction until hand tight, Do not over tighten it.
Check Stock

Camco Propane Double-Stage Auto-Changeover Regulator- For RVs with Dual Propane Tank Hookups, Maintains a Constant Gas Pressure With Auto Change From Empty to Full Tanks (59005)

  • Allows removal of empty cylinder for refill without interrupting propane supply.
  • Inlets are 1/4″ SAE inverted flare and outlet is 3/8″ NPT female pipe thread.
  • For RVs with dual propane tanks. Automatically switches from primary to reserve tank when primary is empty.
  • Primary cylinder 210,000 BTU/hr capacity.
  • Double stage design maintains constant gas pressure under changing demand and conditions.
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...U WILL GET」- The gas hose connector kit mainly includes a 24in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another....
Check Stock

3.2 Gal Commercial Gas Deep Fryer with 2 Tank, Propane Deep Fryer/Countertop Propane Gas Fryer for Home Restaurants Chicken Wings Chips Frying (US Stock)

  • ◆【20L HIGH CAPACITY】Our gas deep fryer has 10L*2 basket,the large capacity of 20L is very suitable for commercial and household, such as fast food restaurants, cafes, snack bars,party or family gatherings, etc..
  • ◆ 【HEAT UP QUICKLY】The double-cylinder fryer heats up quickly and evenly.Precision temperature control for 0°F to 392°F.This fryer can meet your various needs in terms of fried food. French fries, chicken wings, onion rings, shrimp or other snacks can all be perfectly cooked..
  • ◆ 【POWER TYPE】This fryer is heated by liquefied petroleum gas (LPG) and propane,no electricity. The hoses connecting liquefied petroleum gas and fryer also had been provided now. Hose: Inner Diameter: 8.9-9.3mm , Out Diameter: 17.9mm-18.3mm.
  • ◆【SAFE & DURABLE】The gas fryer made of heavy duty food grade stainless steel (0.8mm) construction,strong and durable, not easy to rust.It is equipped with two baskets and lids to prevent splashing of hot oil, and the plastic basket handle can prevent hand burns..
  • ◆【TIPS】State from California pls do not purchase for commecial use!!! It is strictly forbidden to use the fryer to heat the solid oil. The solid oil includes animal oil, solid butter, etc. The use of solid oil is eas....
Check Stock

10 CF Acetylene MC and 20 CF Oxygen Cylinder Set

  • 10 cu ft Steel Acetylene Cylinder Size MC CGA520 Valve Installed.
  • 20 cu ft Steel Oxygen Cylinder CGA200 Valve Installed.
  • Professional Safety and Performance Features.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

HNHYNSY 1/8\ 1/4\ 3/8\ 1/2\ Female x Male Thread 90 Deg Brass Elbow Pipe Fitting Connector Coupler for Water Fuel Copper (Thread Specification : 1\)

  • Generally speaking, the raw material stainless steel is generally non-magnetic. However, due to a series of processes such as processing, smelting, and heat treatment, a small amount of martensite or ferrite structure will appear in austenitic 304 stainless steel. Therefore, 304 stainless steel will have weak magnetic properties..
  • This product is made of 304 stainless steel, which is hard and not afraid of high temperature and low temperature, which effectively prevents the phenomenon of pipe joints from cracking..
  • Built-in screw cap reinforcement to make the connection between the water pipe and the elbow more stable and not easy to break.
  • The inner wall of the water pipe is smooth, and the sealing is strong, which strengthens the stability of drainage and exhaust, and the resistance is reduced, the faster the conveying.
  • Suitable for water pipe transfer, natural gas gas transfer, sewage treatment water pipe transfer.
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

MAPP Propane Torch, Fox Alloy Welding Propane Torch with Self Ignition Trigger and 1.5m Hose Fit, Mapp Gas Torch with Adjustable Flame Control Knob Easily Size Flame for Heating Soldering Brazing

  • SAFE TO USE: The Propane / Mapp gas Torch comes with Two Flame control valve can easily ignite/extinguish the flame and adjust the size of the flame.3.6Ft mapp gas torch hose comes with a cylinder hook, you can hold the propane torch head in tight places for a long time.
  • WIDE RANGE OF USES : The gas torch Easy to use and versatile for all-purpose applications, great for both professional or home needs, soldering pipe,HVAC, welding, brazing, heat shrinkage, snow melting, burning steak, etc.
  • POWERFUL BRAZING: Designed and manufactured under the highest standards, this high output nozzle provides as much as 25,388 BTU/hr, plus heat temperature up to 3600°F, The jumbo size flame cone is capable to surround large diameter copper pipes up to 1.5 inch，which help you to get your job quickly be done.
  • HEAVY DUTY：the butane torch Stainless steel head is resistant to high temperature burning, brass thickened valve, interface ring withholding, strong and firm, anti-tempering structure.
  • VERSATILE FUEL - Designed and tested to compatible to all popular gas fuels on the market, include MAPP, ....
Check Stock

Hose Torch Kit, Propane/MAPP, 5 Ft Hose

  • 【Easy to use】A 3.6ft hose makes it easier to get the map gas torch head into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts..
  • 【Multipurpose use】Flow control knob near torch head for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc..
  • 【Stable performance】 Auto trigger start igniter makes our hose torch head super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface..
  • 【Premium material】The torch head Solid brass regulator is Pressure-regulated, durable Mapp gas torch stainless steel nozzle that withstand high temperature for a hotter, more efficient swirl flame..
  • 【Includes】 Torch head handle | Hose with CGA600 regulator | 2 x o-ring | Instruction Manual | 1 x cylinder clip | 5 x brazing welding rods. Mapp gas torch provides 30-Day full refund and 1-Year Limited Service..
Check Stock

18' to 28' Long Adjustable Gas Lift Cylinder Tube for Bar Stool Drafting Chair Replacement Parts,Heavy Duty Hydraulic Pneumatic Cylinder Shock Piston

  • Study & Heavy Duty: Certified by SGS test (USA) & Higher Standard LGA test (GER), use of high quality materials and thickened outer steel, this gas lift cylinder is of really high quality and durability, weight capacity: 450 lbs..
  • Universal size: 10 stroke cylinder piston tube,the lowest height is 17.7", the highest height is 27.7", which means this hydraulic lift has a height range of 10 inches..
  • Longer service life:These high standard office chair cylinder are more reliable and you get a free replacement for any non-human quality problem within 5 years..
  • Chair replacement parts: Suitable for bar stool ,drafting chair,high stool,smooth rise and fall, and supports 360 degrees of rotation..
  • Easy to Install: Usually you will need to use a hammer to remove the old gas lift cylinder from the chair base and replace it with a new one. (We recommend that you search for "gas lift replacement" on YouTube).
Check Stock