Top Gas Flow Meters - BuyWiseBest.com

Tube Type Acylic Flowmeter, Air Flowmeter Oxygen Flowmeter,LZQ-5 Flowmeter 2.5-25 LPM Flow Meter with Control Valve for Oxygen/Air/Gas

【FUNCTION】- This gas meter is connected to hose to measure unidirectional gas flow..
【QUALITY MATERIALS 】- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure..
【EASY TO USE】- It is simple to use, and has 8mm barbs for convenient connection to hoses..
【WIDE USE】- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc..
【PROFESSIONAL AFTER-SALES SERVICE】- We guarantee the product is 100% brand new. Please feel free to contact us if you have any problems about our product, then we will make every effort to resolve it for you,and give you a satisfactory answer..

High quality drill pump- Fine workmanship, plastic, durable and has a long service life..
Feature- Large flow, stable performance and high efficiency, easy installation..
Quick- Pumping speed is fast, can pump 20-30 L water per minute(depends on the rpm of drill)..
Convenient to use and store- Install all the drill chucks, you can use the electric drill to get the pump, easy and convenient to use. Compact and light weight design, portable and easy to store..
Flow speed- The recommended speed is 1500-3500 rpm. The pump head and flow are related to the speed. The higher the speed, the higher the head and flow. 1500 rpm, the pump head is about 1.5 meters, the flow is about 15L per minute. 3000 rpm, the pump head is about 3 meters, and the flow rate is about 30L per minute..

Suitable for the Nozzle Caliber range of 4 - 30mm.
Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
Designed to check gas flow on Tig or Mig torches..

【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....

...are x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..

Synergic Function: this mig welder designed basic at One-Knob Intelligent control system. Mig machine can automatic compensation and adjustment of....
110/220V Dual Voltage: This mig welder is dual voltage 110/220V, Machine will auto indicate the input AC voltage, Max output current is 165A, Duty....
Lift Tig, 2T/4T Gas/Gasless Function: Machine with Lift TIG function, It is IGBT inverter Gas/Gasless mig welder, Use 0.030’’(0.8mm) Solid and....
Arc force, Hot Arc, VRD: This mig machine will auto control voltage and current to achieve smooth arc, This mig welder quite easy using for the Newer....
Mig Welder, What’s come with machine: 1 x Mig machine, 1 x 3meters Mig torch, 1 x Ground clamp with 3meters cable, 1 x Stick holder with 3meters....

Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.
Bright orange float ball visually confirms the flow of nitrogen gas.
Purge the copper lines at 20+ SCFH and then reduce the flow to Braze at 3-5 SCFH during the brazing process.
Protected from over pressure with a reseatable safety blow off that opens at 200 psi.

Application: Residential, Product Type: Tankless Heater, Type: Condensing, Fuel Type: Natural Gas.
Gas Input: 15000 to 157000 BTU/h, Energy Factor: 0.94, Efficiency: 93%, Max Flow (GPM): 7.1.
Flow Range (GPM): 0.5 to 7.1, Min Flow (GPM): 0.5, Depth (Inches): 6.7", Height (Inches): 23.6".
Width (Inches): 18.3", Max Temp (F): 140°F, Gas Connection: 3/4", Water Connection: 3/4".
Installation Type: Indoor Only, Warranty: 5 Year Parts/12 Year Heat Exchanger, Energy Star Rated: Yes, Venting Requirement: PVC/CPVC.