Top Gas Ignition European Igniter

Weber 67847 Battery Electronic Igniter Kit with Ceramic Collector Box for Genesis (2008-2010)

  • Genuine Weber OEM Part. Weber Igniter Kit for Genesis 300 series gas grills (2008-2010), part # 67847..
  • Kit includes ignition module/bracket assembly, ignition electrode/bracket assembly, button, battery, ignitor wire retainer, and instruction sheet..
Check Stock

Uniflasy Grill Igniter Kit for Home Depot Nexgril 720-0882A 720-0896B 720-0896E Gas Grill Models 6 Outlet Universal AA Battery Tact Push Button Spark Igniter with Wire Ignition Replacement Kits

  • Fits Home Depot Nexgrill Grill Models. Such as Nexgril 720-0882A,720-0896B,720-0896E Gas Grill Models .Make sure you measure the size and check the shape of your original parts and compare with ours BEFORE you order.If you have any question, please feel free to contact us.
  • Universal BBQ Gas Grill Replacement 6 Outlet "AA" Battery Push Button Ignitor (Battery not include).Package include: Package include: 1x 6 Outlets Push Button Igniter 6 x Ignitor Wire.【Dimension】- All wires are the same length: 90.5cm(35.6"), long enough to go from the farthest burner to the electronic ignition box..
  • 【Premium Quality】- There is a heat resistance coating over the wire to ensure safe use. Wire long enough to go from the farthest burner to the electronic ignition box. Lots of length with good insulation. Compare with the original parts, ours are more durable.
  • 【Easy to Install】- We need to unscrew the button cover to install.Press the knob, the pulse igniter starts to ignite.
  • loosen the knob, the pulse stops ignition.The parts can be assembled in minutes. 【Sturdy Packaging】- Our packing is strong enough to allow you to receive the product in perfect condition.
Check Stock

MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers

  • 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
  • How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
  • 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
  • It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
  • Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..
Check Stock

QuliMetal 67726 Igniter Kit for Weber Genesis 300 Series Grills with Side-Controls 2007 Battery Igniter Kit for Genesis E/S-310 E/S-320 with Metal Spark Box

  • 【Fits for】 This 67726 igniter kit fits Weber Genesis 300 series grills (2007) with control knobs on the right side panel,including E-310, E-320,....
  • 【Package Including】 This 67726 Weber igniter kit includes a metal box around the sparking device, a igniter module, a push button, a silver metal....
  • 【Please Note】 Please note that 2008-2010 Genesis models with control knobs on the right side panel take a different part (67847). Also, this weber....
  • 【Durable and Efficient】 Our gas grill electronic ignition kit has passed igniting test before being listed. Once installing correctly, this....
  • 【Warm Tips】 The OEM igniter 67726 uses a AAA battery. Our igniter is not OEM parts, but in good quality and conditions, replace for weber 67726....
Check Stock

MENSI Propane Gas Fireplaces Fire Pits DIY Safety Replacement Part Pilot Burner Assembly for Propane Igniter Kit M8x1 Thermocoupler with OD 4mm Copper Tube Connection

  • Safety pilot kit with ignition 2.8*0.5mm Flat terminal for Igniter & thermocouple sensor M8*1 end thread for valve 900mm.
  • With stainess steel gas collecting box protect the flame to be extinguished and more efficient for ignition sparks.
  • Designed for Fireplaces & Fire pits for propane gas （compare the size before ordering）.
  • This can be a DIY gas appliance and easy install with necessary nuts, Each connection should be connected well so can work perfectly.
  • Attention: 900mm pilot gas tube included with M8X1 Olive Nuts for gas valve pilot port. 4mm diameter Copper tube.
Check Stock

MENSI 11.8” Long Grill Replacement AA Igniter With Electrode Wire High Effiency Pulse Ignition Kit

  • AA battery type igniter one exit with ceramic electrode wire 300mm (battery is not included).
  • Grill replacement ignition part thin type igniter can save more space in your grill.
  • Red push button just small force and many sparks more effiecient.
  • 18mm mounting hole threads on your grill.
  • CSA Certified, Durable and Lasts Longer, Universal Spark generator BBQ Gas Grill Replacement.
Check Stock

Weber Igniter Kit Fits Spirit & Genesis Series

  • Designed to provide a safe and simple start for your grill.
  • Includes: instructions, wiring (black/white), gas-catcher ignition chamber, lock nut, washer and push-button igniter.
  • Genuine Weber replacement part for these gas grill models: Genesis Silver & Gold (pre-2002), Genesis 1000-5500, Spirit 300/500/700, Platinum I & II and Genesis Platinum.
Check Stock

ATKKE 67726 Igniter Kit for Weber Genesis 300 Series Electronic Ignitor Kit with Side-Control Battery Ignition Starter Part 2007 Models Gas Grill for Weber Genesis 310 320 Series Grills Replacement

  • GENESIS 300 SERIES ELECTRONIC IGNITOR KIT - Genesis 300-E and 300-S Series (Model Year 2007) ignitor kit. The distinctive part in this kit is the....
  • PACKAGE INCLUDED - This igniter kit includes one white ceramic U-shaped spark device with electrodes and wires, one electronic igniter module and one....
  • HIGH QUALITY MATERIAL FOR DURABLE AND LONG-LASTING - This igniter kit is made of premium plastic, metal and ceramics. All the components are durable....
  • AN EFFECTIVE WAY TO RE-ACTIVE YOUR GAS GRILL - Nothing beats using a gas grill to make quick and delicious foods while the ignition system plays an....
  • EASY TO INSTALL - The installation is simple and easy. Please prepare a screwdriver in advance. Just remove a couple of screws then you can remove the....
Check Stock

Cecarol Gas Fire Pit Table, Outdoor Fire Pit Table with Lid, 28\ Auto-Ignition Propane Fire Pit 50000 BTU with External Igniter & ETL-Certified, 2-in-1 Firepit Table for Courtyard/Patio/Balcony

  • ...d Stable】This 28”x28”x25” propane fire pit table weighs 53.13lbs, it adopts rust-proof black paint to cover its surface, while the sturdy steel prevents the table from cracks or small scratches..
  • 【Easy to Assemble】By following the user manual the assembling could be pretty easy, in addition, the upgraded ignition system will not only facilitate the ignition, but also the assembling..
  • 【Powerful Heating Performance】This gas fire pit table is ETL certified, the maximum heat output can reach to 50000 BTU, the 4.4lbs lava rocks included makes the flame more attractive. The ignition function has been tested multiple times to avoid any potential problem..
  • 【High Temperature Protection】Some upgrades have been achieved on this item to make it more safe. With the heat insulation plate, now you don’t need to worry about the damage of high temperature to your skin or the cord when exchanging the gas cylinder..
  • 【Flame-out Protection】Moreover, the added thermocouple can cut off the fuel gas inmediately once the flameout happens..
  • 【Manually Painted Side Panels】The side panels are painted manually so that the color is even, making them reflect golden red under sunshine..
  • 【Stainless Steel Igniter】The external igniter is made of stainless st....
Check Stock

onlyfire Universal Fit 4-Spark Electronic Push Button Igniter Kit for Char-Broil Most Grills, Black

  • 4-spark, heat-resistant universal fit electronic grill ignition replacement kit with multiple wires..
  • Highly durable ignition module, switch, button, and wires. Requires 1 AA battery (not included)..
  • Includes ignition module with push button, igniter wire for side burner, igniter wire and ground wire..
  • Replaces electronic igniters on most grills with up to 4 sparks..
  • Ignition housing keeps igniter working under all conditions..
Check Stock

Aupoko Piezo Spark Ignition One Outlet Plug Push Button Ceramic Spark Kitchen Lighter with High Resistance Fits for Gas Fireplace/Gas Oven/Gas - 2 PC

  • WIDE COMPATIBILITY --- This piezo ignitor can be used in gas stoves / ovens, with an ignition needle to play an ignition role..
  • EASY INSTALLATION --- This One outlet spark igniter is easy to install. Keep the ceramic pin around 5 mm to the burner hole or it may not ignite gas,....
  • HIGH TEMPERATURE RESISTANCE --- The type of gas LPG or NG, temperature resistance from -20 to 120 degree centigrade. No battery just press, one press....
  • 1-Year WARRANTY --- This safety valve complete with 1-Year limited warranty, should be there any question, please feel free to contact us..
Check Stock

Universal Ignitor, 120V Silicon Nitride Hot Rod Ignitor Replacement for Silicon Carbide Igniters of Gas-Fired Forced-air Furnaces, Water Heater and Boiler, Nitride Heater Igniter

  • Compatible Models: This silicon nitride igniter compatible with Cook Top and Range, Cook Top, Furnace, Gas Ignition, Hot Surface Igniters, Infrared light source, Warm Air Movement, Pool Heaters and Boilers, Process Machinery, Special FX, Water and Parking Heaters, etc..
  • Function: When your stove won't light, igniter not glowing, cracked, burned out, cracked, damp, etc., or the igniter has no continuity, the multimeter is not reading or changing small(if the igniter has continuity, then your multimeter should read between 9 - 17 ohms), and you have to replace the nitride igniter.
  • Materials: Consists of stainless steel 304 bright finish bracket, 1.97" nitride heating element, 1.18" ceramic insulator body, non-glazed 95% aluminia polished finish, 15-3/4" 20AWG/ UL 10362 specification 250°C temperature-resistance cable.
  • Hot Side Ignitor/Igniter Specification: Rated voltage: AC 120V +/- 10%-15%, 50/60HZ, Cold resistance: 9-17Ω, Rated power: 150W, Temperature at 120v ± 0.5v. 60HZ at 17 sec ≧1180 ℃, Anti-overvoltage ability: igniter energized for 1 minute -132V. Igniter current not allowed to increa....
Check Stock