Top Gas Line Hose

LASCO 10-1259 Flexible Coated Stainless Steel Gas Range Supply Line 72-Inch 5/8 Inch ID with 3/4 Inch Pipe Thread Fittings

  • Premium quality gas hose and fantastic value!.
  • Made with durable material to withstand time.
  • Works as both Natural Gas hose or Propane line.
  • Great for different types of gas powered projects.
  • Most commonly used as Gas Range Connector.
Check Stock

0.3''x59'' (8mmx1.5m) Motorcycle Fuel Gas Line Hose Tube, PRO BAT Oil Gas Line Petrol Hose Tube for ATV Dirt Bike Go Kart Moped Pocket Bike Most of Chinese Scooter with Hose Clamps Fuel Filter，Green

  • ★Gas Fuel Hose Line Length: 59''(1.5m), Outside Dia: 0.31'' (8mm), Inside Dia:0.2''(5mm)..
  • ★Gas Line Petrol Hose Tube Fuel Filters Spring Clips Clamps for This kit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV Dirt Bike Go Kart 4 wheeler Quad Bikes Dune Buggy 4-wheel Pit Bike Trail Bike Go-Karts,such as TaoTao Buyang Coolsport Lifan Kazuma SUNL Redcat Eagle etc..
  • ★100% durable, long-lasting line-up of fuel lines suitable for chainsaws, blowers, pressure washers, weed whackers and trimmers and many other gas engine machines oil and gas tesistant. Ideally suited for water, oxygen as well as for a variety of chemical substances..
  • ★Including: 1.5m Gas Hose Line Fuel, 1pcs Fuel Filter, 8pcs Spring Clips. Six colors for your choice, Orange, Black, Red, Blue, Yellow, Green..
  • ★Please check pictures and specifications for compatibility. Quality assurance, unconditional lifetime guarantee, so you can purchase now with confidence..
Check Stock

PERA 5/16" ball lock line assembly, MFL liquid disconnect with 5ft gas line for home brewing

  • INCLUDES: MFL ball lock disconnect, 2 pcs swivel nut, 2 pcs hose clamp, 5ft ID 5/16″ OD 9/16″ gas line.
  • PRE-ASSEMBLED, can connect gas regulator directly once you get the ball lock gas line.
  • NO LEAK, with two pcs hose clamp, will have no gas leak problem.
  • MULTI-USAGE, carbonated seltzer water, home brew, different beverage, outdoor picnics, keg cleaning.
  • WORK WITH ALL STANDARD REGULATOR, with swivel nut, connect MFL regulators, Remove swivel nut for barb regulators.
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • SIZE- Length 24 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

  • 100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
  • EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
  • USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
  • Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
  • 100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..
Check Stock

60 Inch Gas Hose Connector Kit for Stove Dryer Gas Water Heater Pipe Diameter 5/8 in OD（1/2 in ID） Connector Size 1/2 FIP.1/2 MIP.3/4 MIP Stainless Steel Yellow Rind

  • KIT INCLUDE: 1 set bellow with yellow rind. 2 pack threaded connectors 15/16 Inch-16 UNx3/4 Inch MIP(Tapped 1/2Inch FIP ), 2 pack 15/16 Inch-16 UNx....
  • COMPATIBLE WITH: A stainless steel gas line hose designed mainly for gas stove, gas dryer, gas water heater. It has an outside dimension of 5/8 inch,....
  • DESIGNED CORRUGATED: The stainless steel gas line hose is designed with corrugation, for better use in a narrow range. The corrugated pipe has high....
  • EASY TO INSTALL: No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more....
  • ONE YEAR WARRANTY: Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on....
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...e: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter), so Our natural gas hose can provide up to 100,000 BTU/hour of Flow Capacity, and provide sufficient airflow for larger sizes equipment to meet your more needs..
  • 【Application 】- Gas line Used to Connects any indoor/outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas....
Check Stock

Vincos 20Ft 6 an 6an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit

  • Package Including: 16 Ft Silver Braided Fuel/Oil/Gas Line Kit:(10pcs 6AN hose fitting + 16Ft AN6 PTFE Oil line).
  • Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
  • Hose Material: Inner core PTFE has excellent corrosion resistance..
  • Working Temperature: -40 F to 248 F(-40¡æ to +120¡æ) under most operating. Working Pressure:500 PSI.
  • Features: Maximized Resistance to Heat, Corrosion and Abrasion.
Check Stock

Red Gas Line Air Hose - 25ft Length CO2 Tubing Hose ID 5/16 inch OD 9/16 inch,Include 8 PCS Free Hose Clamps Used for Draft Beer Home Brewing

  • Red Gas Hose ID 5/16 inch, OD 7/16 inch, Length 25ft.
  • Free 8 PCS Hose Clamp will Guarantee have no Leak Problem.
  • The CO2 Gas Line is Tasteless and Odorless.
  • Usually Connect Keg Regulator, Gas Modifold, Keg Coupler or other Beer Equipment.
  • Quality Guarantee: Any Defective for Red Gas Line, Backed by 45 days Money-Back..
Check Stock