Top Gas Range Fittings

1/8 NPT Female Brass Bulkhead Fitting Bulkhead Coupling,1.5 Length Tank Fitting

  • 1/8" NPT female coupling for connecting 1/4 inch NPT fittings through a bulkhead.
  • For use with LP and natural gas, refrigeration, and hydraulic applications.
  • 1200 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..
Check Stock

DOZYANT 24 Feet 1/2 ID Natural Gas Hose Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8 Female Flare by 1/2 Male Flare Adapter for Outdoor NG/Propane Appliance

  • 1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Use to convert outdoor appliance to natural gas supply....
  • Comes with 1/2" Male Flare to 3/8" Female Flare Brass fittings, to convert your 3/8" connector propane/natural gas grill.
  • Perfect for hooking up weber grill, fire pit, patio heater, pizza oven and portable generator.
  • 24-foot durable rubber hose, flexible enough to move your gas device as needed. Quick disconnect feature allow to swiftly disconnect hose.
  • Supplies up to 100K BTU/Hr, provide adequate gas flow for 30-in and larger grills.
Check Stock

Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line

  • REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
  • EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
  • ONE YEAR WARRANTY: We stand behind our products to ensure only the best quality materials and product performance. We offer a 1 year limited warranty on all Highcraft gas connectors so you can be protected in case of any misfunction..
Check Stock

Legines Brass Flare Cap 5/8 Tube OD SAE 45 Degree Flare Fitting Pack of 2

  • Flare cap, for terminating/closing pipe end.
  • Temperature Range: -65°F to +250°F,-53°C to +120°C.
  • Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

15FT 3/4 Inch ID Natural Gas Hose with Quick Connect Fittings for Natural Gas Equipment Outdoor Cooking Appliances Construction Heaters and Standby Generators，Pass CSA Certificate

  • 【Overview】 3/4" ID Natural Gas Hose with a 3/4" Male QD Plug X 3/4" Male Pipe Swivel via Quick-connect Adapter.The product is newly upgraded, and the connector is stronger. The hose wall thickness is thickened to bring you a safer user.The main picture shows all the packages we have included. There are no other extra parts..
  • 【Size】Length 15FT, 3/4" both ends are equipped with 3/4" MALE brass fittings, standard male and female pipe threads, easy to connect to natural gas pipeline system..
  • 【Scope Application】For use with Natural Gas and Liquid Propane applications，propane fire pit，Natural gas fire pit，gas range，water heater，high BTU output outdoor cooking appliances, construction heaters, and standby generators..
  • 【Value for Money】Easy to install, no tools are required to replace this item. Allows you to amplify the quality of your camping or traveling experiences. Durable solid brass and Long-lasting hose.The new upgrade has better quality and more affordable price..
  • 【After-sales and Safety】Pass CSA certificate for your safety.For any quality problem, resend a new or unconditional full refund. 100% money back guarantee - For whatever reason, you are not satisfied, you can request a replacement or a full refund..
Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

  • straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
  • 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
  • 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
  • This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock

36 Feet 1/2-Inch Natural Gas Hose with Quick Connect Fitting for BBQ, Grill, Pizza Oven, Patio Heater and More NG Appliance, Propane to Natural Gas Conversion Kit - CSA Certified

  • 【Good quality】Material upgrade - The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good weather resistance, It is anti-cracking, anti-rust and very durable, Comply with CSA certification.
  • 【Widely used】Has a very broad applicability, Perfect for Weber, Charbroil Grill, and more NG appliances, The hose kit is used to connect your natural gas grill to the natural gas supply.
  • 【Easy to Install】Very easy to use and flexible, With quick-disconnect brass fittings on both ends, it is easy to attach and remove this gas hose as needed.
  • 【Greater capacity】36FT 1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to 135,000 BTU P/HR, provide adequate gas flow for grills and other gas appliance.
  • 【Quality after-sales】1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email me at any time and I will give you the best answer. You do not have to bear any losses.
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

  • Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
  • Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
  • Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
  • You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
  • All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock