Top Gas Solenoid Valve

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/2IN NPT Available (12V DC 1/2IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4IN NPT Available (12V DC 1/4IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

Kegco Premium Commercial Grade Dual Gauge Two Product CO2 Draft Beer Regulator

  • ... Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
  • Attention. Suitable for North American CO2 cylinder with CGA320 adapter! Installation tools are included..
Check Stock

CO2 Art PRO-SE Series Aquarium CO2 Dual Stage Regulator with Solenoid CA-PRO-SE-CGA

  • Electromagnetic modular design, can be disassembled and used alone.
  • Micro solenoid valve, the temperature is much lower than ordinary solenoid valve.
  • Unique structure design, fixed without wrench, freehand operation.
  • High precision structure, precision pressure gauge.
  • The interface is standard CGA320. This pressure gauge is suitable for filled gas cylinders only, not chemical CO2 cylinders..
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • VTEC Solenoid Spool Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effec....
Check Stock

AOMAG 3/8" Electric Solenoid Valve 12V DC, VITON Gasket, Air, Gas, Fuel Normally Closed

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may ca....
Check Stock

ZRDR CO2 Generator System Carbon Dioxide 2L with Dual Gauge Display Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium Stable Output

  • PROFESSIONAL FACTORY - We are a manufacturer specializing in CO2 generator system. Our CO2 generator system is made of 304 stainless steel, far better....
  • SAFE PROTECT - Automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V....
  • REFINE THE BUBBLES - OUR CO2 generator system equipped with the atomizer, refine the bubbles and make it easy to dissolve in water and be absorbed by....
  • LOW COST - Generates CO2 on your own: you only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the....
  • COMPLETE ACCESSORIES - steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply,....
Check Stock

1/2\ Brass Electric Solenoid Valve,110v Ac Brass Electric Solenoid Valve for Water Air Gas Fuel Oil

  • High quality normally closed electric solenoid valve:Model:2W160-15.
  • Size:1/2 inch,Working temperature range: 23-176°F；Pressure range：0-145Psi.
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket..
  • Applicable use in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

Pair Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit For Chevrolet Captiva Cobalt Equinox HHR Impala Malibu GMC Terrain Pontiac G5 Saturn Vue Buick Regal 2.0 2.2 2.4L

  • A camshaft actuator solenoid, normally installed in the front of each cylinder head, is used to precisely control the flow of oil into the camshaft actuator. This changes the rotation of the camshaft to adjust valve timing and valve overlap on the go. These solenoids are used to control both exhaust and intake camshafts, creating the possibility of lower emissions and essentially decommissioning exhaust gas recirculation valves, as well as better performance and fuel economy..
  • There are lots of ways that your car will indicate there is an issue with the camshaft position actuator. The problem is that the same indicators are used to denote all sorts of other problems with the camshaft, its various parts, and the engine. The engine light may come on inside the car, the car may sputter or have trouble starting, or the car may ride roughly once it gets going. You’ll want to get this problem fixed as soon as you notice it..
  • This Solenoid Valve Fits for the Following Vehicles: Chevy Captiva Sport 2012-2015,Cobalt 2006-2010,Equinox 2010-2015,HHR 2006-2011,Malibu 2008-2014.
  • Saturn Aura 2007-2009,Ion 2006-2007,Sky 2007-2010,Vue 2007-2010.
  • Buick Verano 2012-2015,Regal 2011-2015,LaCrosse 2010-2015.
  • Pontiac G5 2007-2010,G6 2006-2010,Sols....
Check Stock

MagTool 4L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve (4L with Solenoid)

  • 4 Liter Capacity. That is 2x larger than the size of our competitors’ CO2 generator systems. Holds 600g-800g of citric acid and sodium bicarbonate, aka baker soda powders..
  • Professional CO2 Kit With All Accessories Needed For A Complete Setup! 4 Liter SUS304 stainless steel bottle / DC mini solenoid / Regulator / Precision needle valve / Bubble counter / CO2 diffuser / CO2-graded tubing / Plastic funnel and measuring cup..
  • Safety! The wall of the bottle meets the safety requirement - 1.5mm thick SUS304 stainless steel. It can sustain pressure up to 1137 PSI (80kg/cm2). The built-in safety valve will open automatically when the inside pressure exceeds the safety threshold..
  • 12V DC Instead of AC Power. DC solenoid runs on very low voltage and generates almost no heat. The solenoid is warm to touch and is super quiet. No humming noises..
  • Attentions: The required powders to generate CO2 gas are NOT included! You will need citric acid and sodium bicarbonate powders..
Check Stock

FZONE Pro Series Aquarium Dual Stage CO2 Regulator Adjustable Output Pressure with DC Solenoid and Integrated High Precision Needle Valve and Bubble Counter

  • ... Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
  • Attention. Suitable for North American CO2 cylinder with CGA320 adapter! Installation tools are included..
Check Stock