Top Gas oil Field

MOXA OnCell G3110-HSDPA 1 Port Tri-Band Industrial UMTS/HSDPA IP-Modem, RS-232, DB9 Male, 12-48 VDC

  • Applications:Remote Data Monitor and Control, Water, gas and oil flow metering and schedule, Power station monitoring and control, Oil field, weather forecast, environmental protection, street lamp monitoring and control, Fleet management..
  • Reliable GSM/GPRS/EDGE/UMTS/HSPA network connectivity, providing fast and cost-effective long-range wireless applications.
  • Designed for Data, SMS and Voice Applications.
  • Support TCP Server, TCP Client, UDP Client Connection stack.
  • A Digital Input Channel for Resetting the System.
  • Provide the MIC Input and Speaker (32 Ω) Output Interface.
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

Pennzoil 550045208 Motor Oil, 5W-30, 5 Qts. - Quantity 3

  • Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology.
  • Designed for for vehicles with over 75,000 miles.
  • Pennzoil Platinum High Mileage 5W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results).
  • No other leading high mileage motor oil provides better protection from friction (Based on Sequence IVA wear test using SAE 5W-30).
  • Formulated to deliver less oil burn off than high mileage motor oils made from crude oil.
  • Helps protect engines from loss of horsepower.
  • Single 5-quart bottle with ergonomic design for easy handling and pouring.
  • Provides faster low-temperature oil flow and protects in extreme heat.
  • Pennzoil is the first motor oil made from natural gas, not crude—PurePlus Technology converts pure natural gas into high-quality, full-synthetic base oil that's crystal clear and contains fewer impurities than other traditional and synthetic motor oils.
Check Stock

KWA Airsoft Gun

  • Realistic construction & field stripping.
  • Adjustable hop-upDescriptionThe AR15 was originally designed as part of the U.S. military's initiative to develop a lighter smaller caliber weapon as the standard infantry rifle. This innovative weapon utilized aircraft technology to lighten the rifle's overall weight. This led to the creation of the M16 which has served as the backbone of the U.S. Military for more than 40 years. Since its inception shorter variations of the M16 were developed for the US Special Forces and other branches of the military, such as the M4A1..
  • The KWA LM4 Professional Training Rifle is an ATF approved gas blowback AR style rifle available in the United States. It features a new hop up system that was developed for the LM4 to improve range performance on the field. An aluminum alloy receiver houses the full steel reinforced bolt carrier for strong reliable feedback. The LM4 PTR buffer tube has the same diameter of a MilSpec Butt Stock which allows operators to customize to their weapon configuration. In addition, the lower receiver can accept aftermarket AR15 pistol grips and trigger guards. Other details such as the operational forward as....
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gallon oil cans, We provide 6 threaded collar caps 3 Coarse Thread & 3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products....
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock

Dräger X-plore Combination Cartridge OV/AG/HF/FM/CD/AM/MA/HS/P100 | 2 Pieces | NIOSH-Approved | for Dräger X-plore 5500 Full-Face Respirator Mask | for Dräger X-plore 3300 & 3500 Half-Face Masks

  • MULTI GAS RESPIRATORY PROTECTION: The Dräger X-plore Combination Cartridge OV/AG/HF/FM/CD/AM/MA/HS/P100 are respiratory protection gas filters against Organic Vapors, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Chlorine Dioxide, Hydrogen Fluoride, Formaldehyde, Ammonia, Methylamine, Hydrogen Sulfide, Oil and Solid Particulates (OV/AG/HF/FM/CD/AM/MA/HS/P100).
  • QUALITY & SAFETY: The robust plastic housing of the cartridges contains charcoal that absorbs the relevant gases from the air passing through when inhaling.
  • EXCELLENT FIELD OF VIEW & EASY TO USE: The twin filter system allows side positioning of the filters for an excellent field of vision. Easy and safe assembly of the filters thanks to bayonet-type connection.
  • COMPATIBLE RESPIRATOR MASKS: The filters can only be used with the Dräger X-plore 5500 Full-Face Respirator Mask (sold separately) or the Dräger X-plore 3300 & 3500 Half-Face Respirator Masks (sold separately). 2 Filters are needed for each Respirator Mask..
  • Box contains 2 NIOSH-approved Combination Filters OV/AG/HF/FM/CD/AM/MA/HS/P100. 2 filters are needed for each use. Filters are vacuum-packed.
Check Stock

KAKEI 14 Inch Chainsaw Chain 3 Pack - S52 - .050" Gauge, 3/8" LP Pitch, 52 Drive Links Fits Husqvarna 120, Echo CS-310, Ryobi RY3714, Worx and More

  • [Keep Field Equipment Handy]: The Felled Chainsaw Bag 14 to 18 Inch Case with Hand Chainsaw Sharpener Kit Accessories allows you to bring along all tools while in the field.
  • Bag compartment prevents oil from getting on your sled so you can cut trees off trails and more in the woods.
  • [Carry a Single Bag]: Double-stitched polyester chainsaw carry case is water and abrasion-resistant.
  • 2 nylon handles and 1 adjustable nylon shoulder strap.
  • End-to-end zipper and 1 main compartment with room for extra oil, off-roading tools, and spare chain.
  • Chainsaw sharpening tools inner pouch bag for easy access to included tools.
  • [Store Your Chainsaw]: 35 x 6 x 11-inch (89 x 15 x 28 cm) overall chain saw case size holds 14, 16, or 18-inch (35, 40, 45 cm) gas-powered saws and battery-powered saws without battery installed.
  • [Use Easily]: Chainsaw file kit includes double-handled frame guides so you can steadily apply level, even pressure to prevent bending or breaking.
  • Chainsaw depth gauge tool and flat file make it easy to maintain proper cutter tooth height while screwdriver wrench allows for proper chain tension.
  • [Package Contents]: Chainsaw box case with chainsaw sharpening tool set includes 3 round saw files 5/32 (4.0mm), 3/16 (4.8mm), 7/32-inch (5.5mm), 3 double-handle....
Check Stock

Allstar ALL78242 Timken Brand High-Temp Synthetic Racing Type Wheel Bearing Grease 14 oz. Cartridge

  • Full synthetic 5W-30 engine oil made from natural gas, not crude, using Pennzoil's patented gas-to-liquid PurePlus Technology.
  • Designed for for vehicles with over 75,000 miles.
  • Pennzoil Platinum High Mileage 5W-30 keeps pistons up to 45% cleaner than the toughest industry standard (Based on Sequence IIIH results).
  • No other leading high mileage motor oil provides better protection from friction (Based on Sequence IVA wear test using SAE 5W-30).
  • Formulated to deliver less oil burn off than high mileage motor oils made from crude oil.
  • Helps protect engines from loss of horsepower.
  • Single 5-quart bottle with ergonomic design for easy handling and pouring.
  • Provides faster low-temperature oil flow and protects in extreme heat.
  • Pennzoil is the first motor oil made from natural gas, not crude—PurePlus Technology converts pure natural gas into high-quality, full-synthetic base oil that's crystal clear and contains fewer impurities than other traditional and synthetic motor oils.
Check Stock

KP KOOL PRODUCTS Gas Can Spout Replacement with Extension Spout - Gas can Nozzle - Gas can Vent kit & Gasket Filters - Used for Old 5 Gallon Gas can spout - Blitz - Midwest - Scepter and Other Brands

  • QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling..
  • The gas can spout replacement kit includes complete package: 4 spout kits , 4 spout sealing caps, 4 coarse threaded bases, 4 fine threaded bases, 1 gas can drill , 8 replacement vent caps. The spout kits, and vent cap are equipped with rubber band, play an epic role in sealing and adjust the angle to put Gas into tank conveniently. It is enable to prevent liquid leakage and transport or store fuel well..
  • HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage.
  • With the replaceable vent caps, the spout kits aslo works for covering more oil cans. The package includes two oil cans with vent caps,( gas can vent caps-A is applicable to oil cans without a vent at the end of the oil can, you just need a simple drilling and installation when you are ready to use. The vent caps-B is applicable to another oil can with a vent cap at the tail .).
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, As shown in the picture The internal thread size is (1-3/4--1.7in), It can only be used for gas cans with a can mouth size of 1.75in. Please measure your oil cans mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can repl....
Check Stock

Gas Can Spout Replacement, Gas Can Nozzle Kit with Screw Collar Caps, Gasket Stopper,and 2 Kinds Gas Can Vent Cap for Most Style Gas Can, Highly Fitted, Smoothly Flow (4 Kit)

  • Gas Can Spout Replacement - Suitable for most 1/2/5/10 gal gas cans (not suit for Blitz gas cans)，we provide 8 Screw Collar Caps (4 Coarse Thread & 4 Fine Thread), 4 Spouts with rubber gaskets and plastic strainer, 4 nozzle caps with threads，2 kinds of gas con vent caps, and the drill bit required to install the gas discharge cap. A good universal gas can spout kit give your old cans new life..
  • High-quality Materials - These gas can pour nozzles and accessories are composed of high-quality plastic, the spout can be freely bent without breaking. they are light weight and easy to carry, environmentally friendly and long life. Thickened and widened rubber sealing gaskets allow gas can spout to fit perfectly with your gas can，there will be no oil overflow even in the case of transportation or the gas can is down..
  • 2 Types of Gas Can Thread Cap - The internal thread size of coarse thread cap and fine thread cap all are 1.75 inches, It can only be used for gas tanks with a tank mouth size of 1.75 inches. Please measure the size of your gas can mouth before purchasing. Perfect size, to ensure a tight fit between the collar cap and the gas can..
  • Unobstructed Flow Gas Can Nozzle Kits - We provide two gas can vent caps. Gas can vent caps-A is used for ....
Check Stock