Top Gasoline Can

Champion Power Equipment 100891 9375/7500-Watt Dual Fuel Portable Generator, Electric Start

  • DUAL FUEL: Operate your 7500-watt portable generator right out of the box on either gasoline or propane, plus the unit holds 1.2-quarts of oil (included) and has a low oil shut-off sensor.
  • ELECTRIC START: Power up the 439cc Champion engine with the handy rocker switch, battery included.
  • INTELLIGAUGE: Keep track of voltage, hertz and run-time hours to easily monitor power output and track maintenance intervals.
  • POWERFUL: At 9375 starting watts and 7500 running watts on gasoline and 8400 starting watts and 6750 running watts on propane, trust Volt Guard built-in surge protector to prevent overloads.
  • CHAMPION SUPPORT: Includes 3-year limited warranty with FREE lifetime technical support from dedicated experts.
  • Gasoline Starting Amps at 120V: 78.1A.Gasoline Starting Amps at 240V:35.1A.Gasoline Running Amps at 120V:62.5A.Gasoline Running Amps at 240V:31.3A.
Check Stock

AOMAG 3/8" Electric Solenoid Valve 12V DC, VITON Gasket, Air, Gas, Fuel Normally Closed

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may ca....
Check Stock

KLOTZ 16oz Octane Booster and Gas Stabilizer Recommended for Gasoline or Ethanol Enriched Fuels

  • A concentrated tetraethyl lead substitute formulated to increase the octane rating of gasoline up to 10 numbers or more.
  • Helps eliminate engine damaging detonation, spark knock, pre-ignition, and pinging from low-octane gasoline.
  • Modifies the burn speed and flash point of gasoline to create a stable combustion chamber flame front, maximizing performance and power.
  • Stabilizes oxygenated gasoline to prevent lean-out conditions.
  • Provides needed upper-cylinder lubrication that is missing in unleaded gasoline.
Check Stock

Smileracing 12V 15 GPM Fuel Transfer Pump with (Manual Nozzle, Discharge Hose, Suction Pipe) for Gas Diesel Kerosene

  • This industry standard DC pump dispenses up to 15 GPM (57 LPM)..
  • Compatible with Diesel, Gasoline, Kerosene, E15, and Biodiesel up to B20.
  • Features Thermal Protection and Bypass Value to Prevent Overloading during abnormal usage..
  • This gasoline pump is fits for lawn tractors, boats, jet skis , snowmobiles, trimmers, and etc..
  • Our gasoline pump equipped for padlocking, your pump nozzle can be padlocked to the pump for added security..
Check Stock

1/4\ NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..
Check Stock

Arnold 2-Cycle Engine Oil - 1-Mix 16 oz.

  • For use with any 2-cycle engine with a ratio of 32:1, 40:1 and 50:1.
  • Provides superior lubrication for 2-cycle air-cooled gasoline engines..
  • Convenient Tip "n" Measure plastic bottle, with fuel stabilizer: holds 16 oz..
Check Stock

VP Racing Fuels Motorsport 5 Gallon Square Plastic Utility Jug Yellow (2 Pack)

  • [Large Capacity] 32 gallons (121 liters) of fuel capacity to store enough fuel for multiple vehicles..
  • [12V Diesel Pump] Easy-to-use electric diesel pump, ready to use when connected to the power supply, with a flow rate of up to 10 gallons per minute..
  • [Easy to Use] The sturdy wheels allow you to easily haul fuel cans over rough terrain, and the heavy-duty handle on top allows you to carry them in a variety of environments..
  • [Excellent Material] The material of the tank body is made of petrol grade polyethylene tuff that can be stabilized and is resistant to corrosion and denting..
  • [Note] This product uses a diesel pump. Please DO NOT add GASOLINE. If there is static electricity, gasoline can easily cause spark combustion and even explosion. Please pay special attention not to use gasoline!.
Check Stock

Chipper Jones 3 [Explicit]

  • EFCUT C30 Wood Chipper Shredder has a 15.6 inch cutting rotor with 2 blades + 6 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and leaves on branches into mulches..
  • EFCUT C30 Wood Chipper Shredder is easy to assemble, also easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 20:1.
  • EFCUT C30 Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity.
  • EFCUT C30 Wood Chipper Shredder has two unique designed check windows, the front one for faster replacement of blades and the back one for easier clearing blockage of debris, making your gardening work more efficient..
  • EFCUT C30 Wood Chipper Shredder can be used for Forestry, Gardens, Landscaping or yard waste recycling to chip tree branches/limbs, and shred brush as a Craftsman Limb Shredder.1-Year Warranty After Product Registration against machine construction(except blades etc. consumables).
Check Stock

Superior Engine System Outboard Motor 4-strok Inflatable Fishing Boat

  • Engine has been certified by CE /EPA. Outboard engine with reverse gear.
  • Suitable in freshwater or saltwater . Perfect math inflatable kayaks,fishing boats,sailboats and canoes..
  • Durable----Compact structure,lightweight and easy to carry,anti-corrosive construction,forward and neutral design..
  • Fuel efficient----Latest fuel saving technology and advanced combustion chamber with four stroke outboard engines,gasoline burn completely,can make every drop of gasoline into power.The 4 stroke saves 30% fuel than 2 stroke..
  • Environmental protection----Clean and pure gasoline fuel makes emissions targets the outboard engine has been able to meet the European and American CE certification,which contributed to the promotion of green sports.In addition,it will not be like two stroke outboard engine is the same keep without burning oil into the water..
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • ...ke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a ....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a 360-degree steering function that allows you to reverse the boat without shifting gears.....
Check Stock

HVDI Stainless Steel Gas Can, Safety Portable Emergency Gasoline Diesel Can Tank, Backup Thickened Tight Sealed Gas Tank with 3 Handles, Vent and Flexible Spout Kit for Vehicles, Cars, Trucks(5Gallon)

  • ✔【304 High-quality Stainless Steel】The gas can is made of high-quality 304 stainless steel with a thickness of 0.9mm. It is resistant to pressure, high temperature, corrosion, and will never rust. Compared with plastic, stainless steel gasoline tanks are not prone to static electricity, and are safer..
  • ✔【Seamless Butt Welding】The gear-shaped stainless steel cover is equipped with a sealing ring to ensure high sealing performance. The tank body adopts seamless butt welding to make it stronger and never leaks..
  • ✔【Portable Flexible Spout Kit】The built-in filter effectively removes impurities, and you can choose either built-in or external oil guide tube, so you don’t have to worry about losing it..
  • ✔【Humanized Design】The gas tank has 3 handles, which support two people to lift. the stainless steel air release valve can balance the internal and external air pressure, and the oil outlet is expanded to 5cm for quick oil output..
  • ✔【Wide Use and Worry-Free Vouchsafing】This gasoline tank is suitable for various liquids such as gasoline, diesel, gasoline, water, etc. If you want higher quality, easier and more comfortable products, please choose us. Customer Satisfaction is our top priority. Please contact us if you need any assista....
Check Stock