Top Gasoline Hose Clamp

Spears 1436 Series PVC Tube Fitting Adapter Schedule 40 Gray 1-1/2 Barbed x NPT Male

  • For use in connecting NPT pipe to schedule 40 PE flexible tubing in a straight run.
  • Barbed fitting creates a tight seal on flexible tubing when used with a hose clamp (sold separately).
  • Maximum working temperature of 140 degrees F.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Meets ASTM D2609 standards for plastic insert fittings and NSF 61 certified for use with potable water.
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

26Pcs 3 Size Spring Band Hose Clamps Black Gripping Plastic Hose Clamps Set,Low Pressure Air Clamp 10mm 11mm 15mm Plastic Snap Ratcheting Clamps Assortment Kit

  • Double Grip - Second row of teeth for a more secure grip than conventional nylon clamps.
  • For use with 9/16" OD Tubing/Hose. Made from UV/Heat Stabilized 6/6 Nylon. Easy to install and reusable..
  • -40C to 125C/225F Long Term Operating Temp Range (up to 170C/340F Occasional Peak Temp).
  • Resists pressures up to 200 PSI and above depending on clamp size and hose/fitting quality.
  • High chemical resistance inlcuding gasoline (with or without methanol), oils, and most solvents.
Check Stock

OTC 4496 Stinger Hose Clamp Pliers Set - 6 Piece Plus Storage Case

  • OTC's Hose Clamp Pliers Set features five different styles of hose clamp pliers and a hose removal tool.
  • Included tools will service most flat-band and ring-style hose clamps.
  • Pliers included are: flat-type hose clamp pliers, offset hose clamp pliers, 45 degree hose clamp pliers, and a set of straight hose clamp pliers.
  • Rugged blow-molded plastic storage case keeps tools contained and organized so they are ready when you are.
Check Stock

Kuriyama - K4137-06X400 Kuri Tec K4137 Series PVC Spray Reinforced Hose, 600 psi, 400' Length x 3/8\ ID, Mint Green

  • Recommended anywhere a hardwall hose is required.
  • Recommended for all gasoline blends, diesel, leaded, unleaded gasoline, E15 Ethanol and B-20 Biodiesel.
  • Designed for durability, flexibility and easy handling.
  • All curb pump hose assemblies are 100-percent pressure tested, inspected for electrical continuity and sample pull tested.
Check Stock

Hose Clamps, Stainless Steel Hose Clamp for 1/2 Inch to 1 Inch Hose Pipe Adjustable Worm Gear Hose Clamps Assortment for Automotive Plumbing, Fuel Line, Mechanical Application, 10 Pcs Hose Clamp Set

  • Sturdy & Durable --- Stainless Steel Hose Clamps made of 0.5mm thickness 304 stainless steel (including band, housing and screw). Hose clamp set have the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Pipe Clamp are reliable strong reusable and durable for long-term use..
  • Adjustable Hose Clamps --- The Worm drive Hose clamps are high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/2 inch to 1 inch (14mm-27mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc...
  • Easy To Install --- Hose clamp large has pre-assemble hose clamp fasteners, with through hole process design and slotted holes, steel belt through hole, tight locking and strong torsion force. Hose clips installation just need to use the hose clamp driver to loosen the screw(6mm Flat Head) of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are perfectly suitable for home, industrial, gardening, mechanical, electronic, boat, marine and more. Hose clamps metal are perfect for automotive, seal hoses, water pipe....
Check Stock

DASBET 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools

  • Universal Hose Pliers Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Portable: The hose clamp tool is housed in a hand-held blow molded plastic case with handle for easy car....
Check Stock

CocoMocart 9.85-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

  • For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control..
  • Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches.
  • The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance.
  • Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications.
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.
  • Package includes:9.8 Feet(3m) 1/4" ID Fuel Line,20 X 2/5" ID Hose Clamps.
Check Stock

Radiator Hose Clamp Pliers Tool - Clamp Tight Wire Tool with 24 Inches Cable - Hose Clamp Removal Tool and Ring Clamp Pliers - Hose Pinch Pliers Type or Flat-band Tools - Wire Long Clip Removal Tool

  • Premium Quality Hose Pliers : Our hose removal pliers mechanic tool is made of high-quality carbon steel with firm grip handles double dipped in rubber for the removal of flat-type or ring-type hose clamp tool, hose removal tool is anti-rust and corrosion-resistant.
  • Application of Hose Grip Pliers: This pinch clamp tool can lose clamps on cars, removes factory spring hose clamp pincer, coolant hose clamps pliers and radiator hoses, automotive clamp allow technicians to access flat hose clamps in hard-to-reach areas.
  • Lock Function of Wire Remover: The hose remover pliers have a ratchet lock that will hold the wire clamp compressed, which can make this hose clamp remover tool a one-handed affair and helps locking pliers mechanism to remove and install metal with ease.
  • Easy Operate Wire Clamp Tool: Radiator hose removal has flexible pipe repair clamp tongs that make the removal and installation of the clip easier, non-slip handles of radiator hose clamp tool assures steady grip, small size makes pliers hose easy to carry.
  • Package Includes - Our automotive clamps tools pack for mechanics includes 1 pieces of flexible hose clamp pliers, pliers size is 3.74 x 8.3 inches (W x L), wire clamps tool is suitable for clamps with a diameter of 0.7 - 2.1 inches..
Check Stock

PLUMIA Oil Change Pump Extractor 12V 80W Upgraded Diesel Fluid Scavenge Suction Oil Transfer Pump with Tube Marine Oil Change Pump and Electric Oil Pump For Boat Car Motorcycle ATV

  • 【QUICK AND CLEAN OIL CHANGES】- Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to....
  • 【SAFE OPERATION】- Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be....
  • 【ENGINE OIL CHANGE MADE EASY】 - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start....
  • 【ACCESSORIES & PRECAUTIONS】- The oil pump has 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. Please pay attention to the direction....
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel,....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock

ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps

  • Function: Precision clamps at the ends of flexible cables allow extensions where other models hose clamp pliers are not accessible, while heavy duty 24-inch flexible cables allow for use in any position. The hose pliers also have a locking mechanism that holds the clamp in the open position for easy removal and installation of the clamp..
  • Premium Quality: The hose clamp pliers are made of high quality material with extra sturdy carbon steel cable prevents twisting and breaking, the hose clamp removal hook set also has durable chromoly vanadium construction..
  • Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
  • Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
  • Package Included: The hose removal too....
Check Stock