Top Gear Head Motor

DEWALT 20V MAX Combo Kit, Compact 6-Tool (DCK620D2)

  • M18 cordless 1/2-inch hammer drill/driver with 4-pole frameless motor delivers 550 in-lbs of peak torque, 0-450/0-1,700 rpm.
  • M18 Sawzall reciprocating saw provides patented gear-protecting clutch and counter balance mechanism.
  • M18 1/4-Inch Hex Impact with 4-pole frameless motor delivers 1400 in-lbs of torque.
  • M18 work light provides a fold-away hook for hands free use and a 135-degree rotating head.
  • Also includes, two M18 XC high-capacity Red Lithium batteries, 1-hour charger, contractor bag.
Check Stock

Metal Gear Motor, 1Pcs 25Mm Dc 12V 25Ga-370 Low Speed Metal Gear Motor for Electronic Lock, Robot, Electric Curtain, Electric Door, Micro Mixer(12V 300RPM)

  • This product is a DC gear motor with high precision metal gear, stable working.
  • This DC motor features large moment of force, low speed, and low noise..
  • The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life..
  • This motor is adopted of pure copper wire coil, with low heat and low loss..
  • Widely used in electronic lock, robot, electric curtain, electric door, micro mixer, monitoring equipment, pet feeding machine.
Check Stock

Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)

  • Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
  • SJS technology is a mechanical clutch system that minimizes motor and gear damage.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
  • Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check Stock

Haokry Hair Clippers for Men Professional - Cordless&Corded Barber Clippers for Hair Cutting & Grooming, Rechargeable Beard Trimmer

  • ...nes the functions of a hair clipper and a beard trimmer in one device. It includes full-size guide combs to satisfy your needs of trimming your head and face, it is also suitable for kids or toddlers haircut thanks to low noise and safety blades..
  • 【Quiet, Powerful Rotary Motor】 The electric clipper's motor is powerful enough to cut through even the thickest hair with ease. The teeth on the blade are tightly line up with each other to remove hair with no snagging or pulling, offering an effective haircut..
Check Stock

JET JWP-15BHH, 15-Inch Planer, Helical Cutterhead, 3HP, 1Ph 230V (722155)

  • Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease.
  • Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier.
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI.
  • Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine.
Check Stock

DBXMFZW 2.4G LCD Screen Remote Control Simulation UH60 Helicopter, Single Prop Aileronless RC Drone Aircraft with Gyroscope 2 Battery 6CH Dual Brushless Motor 3D&6G Simulation Fighter Model,

  • ☀Adopt aileronless design, dual-axis co-drive motor, electronic stabilization system, more accurate feel, more stable flight, and optimized structure to reduce the chance of damage. A 6-axis gyroscope is used. It has a stable, fast and precise flight attitude, especially suitable for beginners to fly..
  • ☀The propeller is designed with aerodynamic principles, providing strong power and self-stability of the body. It has high efficiency, power saving and long flight time. The blade is made of nylon + carbon fiber composite material, which has high strength, good toughness, impact resistance, no deformation and durable..
  • ☀Using high-precision CNC rotor head and swashplate to optimize the structure, reduce weight, and greatly reduce the probability of aircraft damage..
  • ☀Using 4006 630KV brushless motor for self-stable co-drive, reducing gear agitation, with low noise, large torque, sufficient power, and high efficiency. The lock tail motor uses a special 1104 4200KV brushless motor, which has the characteristics of high temperature resistance, fast response speed, stable lock tail, and not easy to be damaged after long-t....
Check Stock

Grizzly Industrial G1021X2-15" 3 HP Extreme Series Planer w/Helical Cutterhead

  • Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease.
  • Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier.
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI.
  • Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine.
Check Stock

OMPHOBBY M2 Dual-brushless Motor Direct-Drive 3D Helicopter-RTF(Charm Orange)

  • The main rotor adopts the brushless motor for direct drive, which perfectly controls the running accuracy and the direct smooth driving feel. It reduces the resistance and noise of gear transmission, especially in flight routes and soft 3D flight, and basically can only hear the sound of propeller cutting wind..
  • The brushless motor is manufactured by SUNNYSKY with high precision, the motor shaft and the shaft of the rotor head are integrated. Besides, the spindle can be disassembled by removing the three screws, and the installation does not affect the dynamic balance. The hand wound coils and the high-performance magnets provide continuous power to M2. After consecutive violent flight with ten batteries, the motor temperature does not exceed 50 degrees, and it can safely fly violently..
  • Independent R&D integrated OFS flight control system. Gyro, flight control, ESC, and receiver 4 in 1 controller, combined with low-vibration airframe, which makes M2 with precise lock tail and excellent control feeling. The flight control has three built-in flight modes: attitude stabilization / soft 3D / violent 3D, which is suitable for indoor flexible flight and outdoor violent flight. In addition to its own communication protocol, it is also compatible with ....
Check Stock

【Element Airsoft Official Store】Motor Gear Pinion Removal Install Tool RC Motor Pinion Gear Tool Motor Pinion Gear Remover Ffor AEG Motors Metal ARMY FORCE-TL002 BK EX121

  • Element airsoft 's name and element airsoft's quality. The best. Motor gear (pinion gear) tool ● Part number: EX 121. airsoft pinion gear puller.
  • With this tool, it is possible to attach and detach without burden.Mounting and dismounting are possible.The pinion remover is an essential tool for changing the pinion gear of the electric gun motor..
  • The motor pinion gear is usually press-fitted and installed, so it is almost impossible to detach it with a tool other than a dedicated tool..
  • The included small parts are grounded before and after the motor when the pinion gear is press-fitted..
  • * Please note that compatibility with D-type motors will be reduced！！！！It fits for O-type motors！！！！.
Check Stock

Shindaiwa Hedge Trimmer 21 inches 25.4Cc 2 Stroke Mid Reach Shaft

  • the quickest, easiest line replacement on the market.
Check Stock

Upgraded Version of Electric Shoe Cleaner Brush Electric Shoe Polisher Pro Brush Shoe Shiner Dust Cleaner Portable Wireless Leather Cleaner Care Kit for Leather Shoes Pro

  • Upgraded Version : We have upgraded the function of the electric shoe polisher kit based on the market feedback of the previous version. The upgraded....
  • Power Upgrade: The motor power is upgraded to 2500 rpm electric shoe brush, and the internal gear is upgraded from single gear to three-dimensional....
  • Material Upgrade: The black and white shoe cleaning brush head with more flexible fiber material, as well as increased bristle density. With your Shoe....
  • Bigger Box Packaging: For this version of the electric shoe brush, we have improved the way it is packaged. With the new packaging, you can give it as....
  • SOFT/HARD HAIR SHOE CLEANING BRUSH: 2 colors of high elastic fiber cleaning brush heads. The black head (soft hair) is suitable for cleaning the....
Check Stock

Invicta ITK002 Multi-Function Watch Tool Kit Set

  • ✿【3 Rotation Mode Setting】 1.OFF-turn on/off the watch winder.
  • Gear B: 2 mins CW → stop 6 mins → 2 mins CCW → stop 6 mins → repeat..
  • Gear L: 5 mins CW → 5 mins CCW → last 3 hours→ stop 9 hours → repeat.Multiple rotation modes make the watch winder box easy to use..
  • ★【Super Silent Motor】The watch box uses Japanese ultra-quiet motor to make your watch rotate quietly and safely, which is beautiful and practical, and the winding operation has no running noise. So it could be put anywhere like bedroom or office without representing a distraction factor..
  • ◆【2 charging methods】USB-DC power cable.
  • you can use the USB cable to connect the charging head of the mobile phone, convert it into a DC power cable for charging, or use the DC converter cable to connect two watch winders for charging ..
  • ♥ 【Flexible Watch Pillows】The watch pillow is made of high-end leather with soft inner lining to protect your watch from damage. The pillow is flexible and elastic to fit different sizes of watches and you can also choose multiple ways to store your watch and display your watch in multiple directions..
Check Stock