Top Gear Shafts

Hakka Commercial Dough Mixers 10 Quart Stainless Steel Spiral Mixers (DN10)

  • Front-mounted controls with 60-minute digital timer and last batch recall.
  • Heat-treated hardened steel alloy gears and shafts.
Check Stock

Tamiya 300054114 Crawler Motor CR CR/Tuned 35T

  • Radio Control Kit. Durable ladder frame chassis features steel channel and resin crossmembers for high strength.
  • Adjustable front and rear leaf spring suspension system equipped with friction dampers.
  • 3-speed transmission allows gear changing and realistic low-speed driving.
  • Propeller shafts and slipper clutch efficiently transfer power to all wheels.
Check Stock

Complete Tractor 1104-4450 Steering Gear Assembly Compatible with/Replacement for Ford Holland - E0Nn3503Aa E4Nn3503Ca

  • Specs: Steering Gear Assembly, Length: 18", Outer Spline: 36, Notes: Manual steering gear w/18" main shaft. Sector shafts use D9NN2N289AA seals, already installed. Steering gear Assembly Compatible With / Replacement Fordiesel and gas applications..
  • Compatible with/Replacement forFord/New Holland: 8N3509B, 8N3548B, 8N3575B, X-S.67077.
  • Compatible With / Replacement For: Ford/New Holland 2000 Series 3 Cyl 65-74, 2150, 2300, 230A, 2310, 2600V, 2610, 3000 Series 3 Cyl 65-74, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 335, 3400, 3430, 3500, 3550 Indust/Const, 3600V, 3610, 3610NO, 3610V, 3910, 3910R, 3930, 4000 Series 3 Cyl 65-74, 4100, 4110, 4130 3 Cyl 90-99, 4410, 4610, 4630, 4830, 5030, 530A.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
  • 100% New aftermarket Steering Gear Assembly built to meet OEM specifications for Ford/New Holland.
Check Stock

Stanley Proto J250G Proto 9-Inch Lock Ring Horseshoe Washer Pliers

  • For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts.
Check Stock

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm

  • Traxxas 59076-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Red.
  • Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Di....
Check Stock

Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran

  • Traxxas 59073-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Blue.
  • Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body D....
Check Stock

Stanley Proto J226G Proto 6-5/8' Needle-Nose Pliers w/Side Cutter

  • For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts.
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear HLSK103YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock