Top Geared Stepper Motors

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

Dr.Roc GM Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 7 Motors,10 Backlight Bulbs,1 Remove Tool,Flux Rosin Core Solder

  • The latest generation,Premium stepper motors,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168, X15-168 ,X25-168 and....
  • Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or....
  • Each gauges of your instrument cluster need one motor,since one stepper motor went out will result all the motors go out soon. check the stepper motor....
  • It is easy to use,but you’d better to search the instructions Video on Internet first,which is very helpful.
  • Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service with 12-month warranty.
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock

Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

  • 【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire..
  • 【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on..
  • 【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current..
  • 【4】The largest 32 divisions of the 6 models are optional.
  • Suitable for 4 wires, 6 wires and 8 wires stepper motor..
  • 【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion..
Check Stock

PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case

  • PARAMETER — working voltage DC 3.3-30V.
  • DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
  • APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
  • for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
  • PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
  • EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Check Stock

Zinger Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 Fits 03-06 GM Chevy Silverados Tahoes Yukons(7Motors+36Led Light Bulbs+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • The latest premium gm instrument cluster stepper motors ,perfectly replacement for the XC5-168, X15-168 ,X25-168 and X27-168 that are in your gauge cluster for 2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer.
  • Stepper motor repair kit include:7 X27 168 motors+36 backlight led bulbs+soldering iron+solder sucker+remove tool+flux rosin core solder.
  • Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Fix common problems caused by stepper motor of your vehicles:gauges dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Our factory is auto accessories expert, excellent customer service with 12-month warranty.
Check Stock

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws

  • 4pcs of NEMA 23 stepper motor mounting brackets..
Check Stock

Nema 34 Stepper Motor Steel Mounting Bracket with Mounting Screws

  • NEMA 34 stepper motor mounting brackets..
Check Stock

ECCPP 6 Qty GM Stepper Motors Speedometer Gauge for Instrument Gauge Cluster Dashboard 03 04 05 06 Yukon Envoy Tahoe Silverado Cavalier Impala Sierra Avalanche Monte Carlo

  • A direct replacement for the XC.168, X15.168 and X25.168 commonly found in 2001-2006 General Motors instrument clusters..
  • The stepper motor is a patented stepping motor design, which has a 4 gears design construction in order to guarantee high efficiency, high position....
  • Replacement for:speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel....
  • Notes:In order to buy the correct item,please check the compatibility list and product size before placing the order..
Check Stock

Protech 51-102500-01 1/2 hp 120/1/60 Blower Motor

  • HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error..
  • LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise..
  • DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction..
  • WIDE APPLICATION: This small motors can be used in various area, such as stage lighting.
  • WHAT YOU GET: The package includes 1* 42 Stepper Motor..
Check Stock

Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor（1 pcs

  • Package included: 1 x Stepper Motor Driver..
  • ✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • ✿The largest 32 subdivision of the 6 models are optional.
  • Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper....
  • ✿Protect form✿: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage....
  • ✿Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines,....
Check Stock