Top Glass Fiber Filament

R QIDI TECHNOLOGY PA12-CF Nylon Filament 1.75 Black, Carbon Fiber Nylon Filament 1.75mm 1Kg Spool 3D Printer Filament, High Strength, High Precision, No Warpage, Low Moisture Sensitivity

  • 【Excellent Mechanical Properties】An upgraded formulation of 85% PA12 + 15% Carbon Fiber, this brand new Carbon Fiber Nylon Filament has superb strength, rigidity, excellent toughness, outstanding resistance to impact, wear, chemical and temperature, these properties combined making this PA12+CF Filament an ideal choice for printing parts or personalization..
  • 【High Dimensional Stability】PA12-CF is an enhanced composite carbon fiber nylon material, adding 15% carbon fiber, this carefully formulated blend ensures ease of stable prints, extremely high successful rate, outstanding surface finish and good layer adhesion with no warping and less shrinkage..
  • 【Low Moisture Sensity】PA12-CF’s saturated moisture absorption rate is only one tenth of that of ordinary PA6. Its low moisture sensitivity ensures outstanding mechanical and thermal properties even after the moisture conditioning process..
  • 【Tangle Free & Vacuum Aluminum Foil Package】QiDi PA12-CF 1KG filament 1.75 is carefully winded to avoid any tangling issues. And we used vacuum aluminum foil packaging, its water vapor transmission rate is only 0.014%. You can open it for use without drying..
  • 【Printing Skills】QIDI TECH provide a solution for printing carbon fiber, QIDI TECH X-CF is a ....
Check Stock

LIGHTNING POWDER Zephyr Fiberglass Fingerprint Brush

  • Capacity to pick up and retain large amounts of fingerprint powder.
  • The filament ends actually become softer with each use..
  • Brush consists of thousands of fiber bundles, each composed of more than a hundred individual treated-glass filaments.
  • Since 1956, the Zephyr Brush continues to be the best fiberglass fingerprint dusting brush available.
Check Stock

SUNLU Carbon Fiber PLA Filament 1kg 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75 mm

  • 【SUNLU Material】 Carbon fiber Polycarbonate - Color: Black - Weight: 1kg (approximately 2.20lbs)/Spool.
  • 【SUNLU 3D Filament Size】 1.75mm (Tolerance Level : +/- 0.02mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
  • 【Recommended Printing Temp/Nozzle Temperature】 190-230°C (374-446°F), Base Plate Temperature: 60-80°C(140-176°F).
  • 【Performance Advantages】 SUNLU Carbon fiber PLA filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.
  • 【100% Environmental Friendly】 Carbon Fiber filament 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances..
Check Stock

Apera Instruments 201T-F All-in-one pH Electrode, ATC, BNC/RCA Connector, Polycarbonate Body AI1302

  • Built-in temperature sensor, testing pH and temperature simultaneously, enabling Auto. Temp. Compensation.
  • Apera's special lithium glass membrane ensures generate quick and stable pH readings..
  • A detachable sensor shield is built upon the sensitive glass membrane to protect it from accidental damage..
  • A unique junction composed of ceramic and fiber filament efficiently improves the problem of junction clogging..
Check Stock

3DXTECH FibreX PA6-GF30 Glass Fiber Reinforced Nylon, 1.75mm, 500G 3D Printing Filament

  • 30% glass fiber reinforced Nylon 6 Copolymer.
Check Stock

YXPOLYER Carbon Fiber abs ,Carbon Fiber abs Filament 1.75， abs Carbon Fiber Filament,abs Filament,Engineering 3D Printer Filament,1kg Spool,Black

  • ★【ABS-CF10 3D printer Filament】YXPOLYER ABS-CF10 is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Also it is commonly used for printing functional prototypes and production parts. Support Material: AquaSol-120, Alkali soluble filament..
  • ★【Features & applications】 Carbon fiber reinforced ABS，High modulus，Excellent chemical and thermal resistance（The temperature resistance exceeds ABS 15℃）， Strong layer bonding，ease of printing.Suitable for machinery, automobile and other fields, such as elevators, hand tools and calibration fixtures on assembly lines, etc..
  • 【Printing conditions】We recommend print the filament at a Printing temperature of 220℃-260℃, bed temperature of 80-100°C..
  • ★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Triple waterproof protective packaging】Our packaging is vacuum sealed with semi-aluminum foil bags with desiccant,which can better isolate air and water molecules.Vacuum b....
Check Stock

Mworld2 Glassfibre Board Single Side Durable Template Home Craft Supplies Epoxy Glass Sheet School Fibreglass Plate Laminate DIY Portable Glassfibre Board

  • Size:about 30x17cm.Types: about 1mm, 2mm, 3mm, 4mm..
  • Package included: 1pc x glassfibre board..
  • Cloth material with an epoxy resin . It has characteristics of high strength..
  • The glassfibre board is made of high quality FR4 glass fiber, which is a thermosetting industrial laminate consisting of a continuous filament glass..
  • Store at room temperature but also under humid or moist conditions.​.
Check Stock

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

CoCocina 250x420mm 0.5-5mm Black Fiberglass Sheet Glass Fiber Sheet Epoxy Glass FR4 Glass Fiber Plate for DIY Craft - 0.5mm

  • FR4 is a thermosetting industrial laminate consisting of a continuous filament glass cloth material with an epoxy resin binder. It has characteristics of high strength, excellent electrical properties and chemical resistance not only at room temperature but also under humid or moist conditions..
Check Stock

AMOLEN 3D Printer Filament Bundle,Wood PLA Filament 1.75mm Bundle,Wood Filament,Marble PLA,Sparkles Gold,Bronze,3D Printing Filament Bundle,225g X 4 Spools

  • ✔PLA FILAMENT BUNDLE - 225g Wood Filament,contacts 20% real Bamboo fiber,225g Marble PLA,225g Sparkles Gold,225g Bronze PLA Filament..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔PREMIUM QUALITY - The pla have good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
  • ✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament？.
Check Stock

AMOLEN Real Wood 3D Printer Filament Bundle, PLA Filament 1.75mm Bundle, Dark Walnut Wood,Bamboo Wood,Red Wood,Ebony/Black Wood, 3D Printing Filament Bundles, 200g x 4 Spools

  • 【Wood PLA Filament Bundles】 - Package include 4 wood filaments, Dark Walnut Wood PLA Filament 1.75mm, Bamboo Wood,Red Wood,Ebony/Black Wood, 3D Printer PLA filament Bundles, 200g each spool with woody touch, dimensional:1.75mm,accuracy+/-0.02mm..
  • 【Premium Quality Wood Filament 】- Dark Walnut Real Wood PLA Filament, red wood and ebony wood are made of PLA and contains 20% natural wood powder, the light color wood has 20% bambbo Fiber, prints with wood-like surface of wood color and texture. The print even smells like wood. Ideal for print flower pots for growing succulents or flower, or print tree, groot or other wood-like models..
  • 【High Compatibility】 - AMOLEN 3D Printer Filament is Perfectly compatible with 99% FDM 3D Printer and 3D Pen, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear, ANYCUBIC, Creality 3D, SUNLU, ERYONE,MYNT3D, 3Doodler..
  • 【Vacuum Sealed Packing 】- Wood PLA Filament bundles come with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, 3D Printer Filament can be put back into bag after used. The transparent plate makes it easier for you to check the filament color and the remaining filament..
  • 【100% After Sales Service 】- AMOLEN provide professional 3D pri....
Check Stock

MakerBot 375-0059A Method Nylon Carbon Fiber Filament Black (.50kg, 1.1lb)

  • 1 Spool of MakerBot Nylon Carbon Fiber Filament Black for Method 3D Printers (1.1 lbs).
  • MakerBot Materials for Method are manufactured to exact diameter and quality specifications. Shipped in a vacuum-sealed metalized polyester bag, quality is preserved right up until opening..
  • The Smart Spool provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a built-in desiccant absorbs any moisture exposure during the material loading process..
  • The optional Composite Extruder for MakerBot Method is required to print with Nylon Carbon Fiber Filament.
  • Carbon fiber reinforced nylon optimized for high strength to weight ratio, stiffness, and heat resistance making it ideal for structural applications and metal replacements..
Check Stock