Top Glass Marking Engraver

NEJE 3 N30820 Laser Engraver, 5.5-7.5w Output Power DIY Laser Engraver and Cutter Machine Support LightBurn, 0.08mm Ultra-Fine Focus, for Acrylic Wood and Glass ,170 x 170 mm(6.7'x6.7')

  • ...ith square focus, the minimum focus point can reach 0.08×0.08mm. The module is good at engraving with wood, rubber stamping, glass, transparent acrylic and cutting plywood, black acrylic, cloth, etc… The module has a built-in intelligent driver, which can dynamically adjust the fan for quieter use.
  • 【Appropriate Engraver Area】170 x 170 mm engraving area, the desktop professional engraver machine is tiny, beautiful and lightweight, portable and does not take up space, and is fully functional.It is the most cost-effective machine. The whole machine test only needs 4 screws to complete the installation. Suitable for beginners/entrepreneurs/engraver hobbyists/designers/housewives.
  • 【Applicable Engraver Materials】NEJE 3 portable engraving machine supports engraving wood, MDF, leather, paper, cotton and other materials.Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.The machine is compatible with mature engraving software on the market (LaserGRBL, Lightburn) and beginner-friendly software (NEJE 3).
  • 【Security Protect】Safety is always the top priority.NEJE 3 cutting and engraving machine has built-in MEMS gyroscope sensor to record the state of the machine.When the device moves, the machine will automatically stop w....
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

Tiamu Engraving Machines Electric Engraver Etching Pen Cordless Rotary Tool for Jewelry Glass Wood Ceramic Metal Plastic

  • USB ENGRAVER:These engraving tool equiped with Lithium battery and rechargable by USB interface. Cordless using will be up to 30 minutes idling after full charge. Easy to help you finish better engraved craft..
  • VISIBLE SPEED ADJUST:Metal engraver pen equips with excellent motor, power up to 25W while working. 3 position adjust rotation speed from 5000-25000 r/min to apply different situations. The lowest speed will let you polishing your nail in safe, the highest speed are also working on metal carving..
  • VARIOUS GRINDING BITS: these metal engraving machine kit include 30pcs rotory bits,2 drill bits, 3 saw blades, all these bits are enough to work on engraving, carving, sanding, polishing, etching, routing, grinding, drilling, cutting..
  • BEGIN ENGRAVED ART NOW:these portable and compact etching pen are convience to take anywhere you want and allow you enjoy relaxing hand drill jewelry making . It can work on metal, glass, ceramic, leather, wood,jewelry,stone or statue..
  • BEST CHOICE FOR BEGINNER:Our metal engraver tools are easy to operate,special for beginner to use.Create a keychain,DIY a necklace or send gift with our kits..
Check Stock

ATEZR V35 Plus 160W Laser Engraver with KR PRO Chuck Rotary and KA Air Assist, 35W Output Power Laser Cutter, DIY Laser Engraver and Cutter Machine for Wood, Black Acrylic, Metal etc.

  • 【WORLD’S FIRST 35W LASER Engraver】Atezr V35 PLUS 35W Laser Engraver has 160W machine power and 34-36W laser power. This allows ATEZR V35 PLUS laser cutter to cut 18mm paulownia wood, 12mm black acrylic, and a maximum of 30mm paulownia wood, 40mm black acrylic in one go. Atezr V35 PLUS is the first 35W laser engraver on the market today, delivering unrivalled speed and precision for all your engraving needs. From wood to glass, Atezr V35 Plus can handle it all, creating deep, detailed engravings in no time. And, with faster processing times, you can complete engraving jobs quickly and efficiently, allowing you to take on more work and grow your business..
  • 【SUPER ACCURACY - HIGH-QUALITY WORKS】Atezr V35 PLUS Laser Engraver and Cutter Machine adopts spot coupling technology, the laser consists of six beams of diode lasers to achieve ultra-fine compression spots as small as 0.06 x 0.1 mm. You can achieve very sharp and precise lines and contours with Atezr V35 PLUS Laser Cutter, even when working with very complex designs. And a higher compression can provide faster processing times and reduce the likelihood of burning or scorching the material. Higher compression spots can also help reduce the amount o....
Check Stock

Laser Engraver,WAINLUX Z3 Portable Laser Engraving Machine 0.05mm High Precision,Auto Fixed Focus Compressed Spot, Foladable Laser Engraver for Wood and Metal,Acrylic,Leather, DIY Engraving

  • 【Upgraded Auto Focus &Lift Design】WAINLUX Z3 Laser engraver support one touch auto focus,it will also projects a preview of your image on the surface before engraving, make your work more efficiently. It is foldable design and no need to install.Your engraving work will not be limited by place and time any more since it is compact and lightweight and portable and can be power supplied via power bank..
  • 【Faster and Higher Accuracy Engraving】Z3 laser engraving machine with 5W laser power and 0.05mm ultra-long and finer infrared laser,the max engraving speed reach 600mm/s, bring you fast and precise engraving experience and making each engraving lifelike.The fixed engraving area is 80mm*80mm.(Note:For metal,Z3 will only work on COATED METAL).
  • 【Bottom Hollow and Rotatable Design】 Using Z3 to get more carving modes. Both of the flat and convex side of the movable board can be placed according to your needs for carving and cutting. With unique rotatable design,Z3’s rotatable Design allows you to engrave any bevel within 180°. You can also place the Z3 directly on top of large objects for accurate marking break the height and area limitations..
Check Stock

USB Rechargeable Engraving Machine with Bits Wrench Slicing, Mini Electric Engraver Etching Pen Cordless Rotary Tool Kit, Professional Engraved Pen for Jewelry Metal Glass Wood Ceramic Stone

  • ❤【Rechargeable & Intelligent Power-off】Our micro engraver pen powered by a rechargeable lithium battery and can be charged with USB cable. the electric engraver tool has intelligent overload protection chip. When the working resistance is too large, it will automatically cut off the power to prevent from damaging the engraving pen. Really safe to use..
  • ❤【High Efficiency & Adjustable Speed】our electric engraving pen power up to 25w when working, and this usb rechargeable engraving machine provide a high speed of up to 5000-25000r/min, with three levels of adjustable to meet your needs, The lowest speed can polish your nail in safe, the highest speed is also working on metal carving..
  • ❤【Reliable & Comfortable Grip】our electric engraver pen made of high-strength metal and selected electronic parts are used, which are wear-resistant, wear-resistant and have a long service life. The lightweight and ergonomic grip engraving pen allows you to use it like a pencil, with a comfortable hand feel, better control and precise engraving..
  • ❤【Wide Applications】Our cordless engraver pen used for carving glass, metal, ceramics, wood, pebbles, plastics, jewelry etc. This etching pen is a portable engraving tool that lets beginners and professionals....
Check Stock

1500mw Blue Laser Diode Engraving Emitter Blue-violet Laser Diode Head Dot for NEJE 1500mW Engraver Only

  • Design for engraver printer machine, suitable for NEJE 1500mW engraver only..
  • 1500mW blue-violet light laser, higher speed, support more types of materials..
  • Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on..
  • Long time use, carving time will last much longer than other laser head and more stable..
  • Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries..
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock

LiebeWH 1pc Laser Diode Head Engraving Emitter Blue-violet Light for NEJE 1000mW Engraver Only to Avoid Eyes IAnjuries

  • 【Professional design】Design for engraver printer machine, suitable for NEJE 1000mW engraver only.
  • 【High-quality】Long time use, carving time will last much longer than other laser head and more stable.
  • 【Features】1000mW blue-violet light laser, higher speed, support more types of materials.
  • 【Appropriate types】Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on.
  • 【Supplement】Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries.
Check Stock

US Stock 50W JPT Fiber Laser Engraver Equipped 80mm Rotary Axis,175mm (6.9in) Lens Laser Marking Engraving Machine fits Gun/Pistol/dogtag/Jewelry

  • ⚡USB WIRELESS ENGRAVER⚡:These engraving tool equiped with Lithium battery and rechargable by USB interface. Cordless using will be up to 30 minutes idling after full charge. Easy to help you finish better engraved craft..
  • ⌚VISIBLE SPEED ADJUST⌚:Metal engraver pen equips with qualify motor. 3 position adjust rotation speed from 5000-25000 r/min to apply different situations. The lowest speed will let you polishing your nail in safe, the highest speed are also working on metal carving..
  • VARIOUS GRINDING BITS: these metal engraving machine kit include 30pcs rotory bits,2 drill bits, 3 saw blades, all these bits are enough to work on engraving, carving, sanding, polishing, etching, routing, grinding, drilling, cutting..
  • BEGIN ENGRAVED ART NOW:these portable and compact etching pen are convience to take anywhere you want and allow you enjoy relaxing hand drill jewelry making time. It can work on metal, glass, ceramic, leather, wood,jewelry,stone or statue..
  • BEST CHOICE FOR BEGINNER:Our metal engraver tools are easy to operate,Create a keychain,DIY a necklace or send gift wi....
Check Stock