Top Glass Print Bed Option

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

LulzBot Mini 2 Desktop 3D Printer

  • Maximum print size: 160 mm x 160 mm x 180 mm (6. 3 inches x 6. 3 inches x 7. 08 inches).
  • Tool Head: E3D Titan Aero with . 50mm Nozzle – Compatible with Flexible and Rigid Materials - Maximum Temperature: 290°C (554°F).
  • Heated print bed: borosilicate glass/pei - maximum temperature: 120°c (248°f).
  • Includes 1-year limited with 7-days/week phone and email technical support.
  • Certifications: UL, CSA, ETL, FCC, CE, WEEE, FSF-RYF, OSHWA. Print Volume: 281. 4 inches.
Check Stock

TENLOG TL-D3 Pro Independent Dual extruder 3D Printer BMG extruder 280 Degree high Temperature Nozzle Silent Motherboard TMC2209 Driver 600W Power Supply Print Size 310x310x350mm.

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes..
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
Check Stock

TL TENLOG TL-D3 Pro 3D Printer Independent Dual Extruder 3D Printer Silent Mainboard tmc2209 Driver 4.3 inch Multi Language Color Touch Screen,Professional 3D Printer,300x300x350mm

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade borosilicate glass bed】：TENLOG's upgraded borosilicate glass bed allows the printed product to adhere better without warping. Even the....
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

  • 【EXTRA LARGE】✔️Printer CR10 V3 comes with one of the largest build spaces available. At 12x12x15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints..
  • 【GLASS BED】✔️he reliable and flat glass bed can make the model easier to adhere to when printing, and easy to remove after cooling. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time..
  • 【24V/350W MEANWELL POWER SUPPLY】✔️Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100.
  • 【OPEN SOURCE】✔️ In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product....
Check Stock

Creativity CoreXY Double Z axis Auto-Leveling 3D Printer 300x300x350MM Remote Range ELF High Precision Aluminum Profile Frame Dual Z axis BL Touch Auto Leveling

  • (Dual Z-Axis High Precision)The print precision is greatly improved by equipping with Dual Y-axis Sideway Design. Full aluminum frame and closed loop....
  • (Large Build Volume) ELF FDM 3D Printer comes with larger build spaces available. At 300 x 300 x 350mm, able to print models that 90 percent of other....
  • (Filament Detection Auto and Power Loss Resume) 1.Filament Detection: Auto pause if filament runs out or breaks 2.Power Loss Resume: One click to....
  • (Extra Lattice Glass)Add a Lattice glass on the heated bed, which makes models are easier to be removed. Lattice glass is harder than ordinary glass,....
  • (Technical Support)The Creativity provide one year after- service for printer and technical assistance and 24H response..
Check Stock

Decorative Art Nouveau Reprint: Alphonse Mucha ~ Beautiful Women in Advertising (8\×10\ Print, Set of All 6 Styles)

  • Order these unique and wonderful prints as either Framed or as just the Print by itself.
  • conveniently available for you to purchase both ways. For the "Print w/ Black Frame" option, the 8"×10" art print is mounted in an 11"×14" mat (outside dimensions) set within a 1" black frame and light-weight, shatter-proof, crystal-clear acrylic glass..
  • Printed on linen-textured fine-art matte photo paper for a soft, 'quiet', light-absorbing surface..
  • Printed using only archival, pigment-based inks.
  • A perfect decoration for home or office. Enjoy this ArtDash product, as well as our many other designs. ArtDash has printed 1000's of Art Prints and Inspirational & Educational Posters, shipped throughout the world..
  • Printed in Maine, USA. Item No. AN066set~8/10.
Check Stock

Magigoo MPC2018 3D Printer Adhesive Glue, Reduces Warping for Polycarbonate Filament on Glass, PEI, Buildtak, Kapton, 50ml 1.69 fl. oz.

  • WORKS ON POLYCARBONATE FILAMENTS: specifically built for polycarbonate filaments unlike many other products.
  • WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton.
  • EASY USE: applying Magigoo is as easy as child's play. Shake, press, apply to an active printing area. Magigoo PC welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo PC adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo PC is easily cleaned with water.
  • LONG LASTING: Magigoo last for 100+ average prints.
  • ODOURLESS AND SAFE: Magigoo is not flammable and safe to use.
Check Stock

Magigoo MPA2019 3D Printer Adhesive Glue, Reduces Warping for Nylon Filament on Glass, PEI, Buildtak, Kapton 50ml 1.69 fl. oz.

  • WORKS ON NYLON FILAMENTS: specifically built for nylon filaments unlike many other products.
  • WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton.
  • EASY USE: applying Magigoo PA is as easy as child's play. Shake, press, apply to an active printing area. Magigoo welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo PA adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo PA is easily cleaned with water.
  • LONG LASTING: Magigoo PA last for 100+ average prints.
  • ODOURLESS AND SAFE: Magigoo is not flammable and safe to use.
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • ...rylic open door structure giving the FDM 3d printer a very elegant appearance. It can seamlessly fit into any area of your home or office with ease. Moreover, 4.3in HD Touchscreen and neat wire arrangement make the machine quite beautiful. Excellent 3d printer for beginners and surprising gift for kids..
  • Carborundum glass platform: The 3d printer glass bed as its hot-bed evokes a sense of elegance with this machine. More importantly, the superior heat resistance and thermal conductivity of the hotbed greatly improves heating efficiency and bed adhesion, which results in exact smoothness, even on the first layer of the prints..
Check Stock