Top Glass Surface Lapping Machine

Shapton Glass Stone Seven

  • Includes 3 Shapton Glass Stones in 500, 2000 and 30,000 grits (25, 6.7 and .44 micron).
  • Stone Holder, Diamond Lapping Plate and Storage Box.
  • Stone Size: 160 x 37 x 12 mm - (6.3 x 1.45 x .47 inches).
  • The highest quality sharpening stone set we've seen. Exactly what you would expect from Shapton!.
Check Stock

Taytools 773420 One Piece 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a piece of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass..
  • Microfinishing/lapping film will need to be cut to size to fit glass plate.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Wheeler Scope Mounting Combo Kit with FAT Wrench, Alignment and Lapping Bars, and Storage Case for 1 Inch and 30mm Rings

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" & 30mm scope ring lapping bars, 1" & 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock, and Wheeler PRLS Reticle Leveling System.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope, adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings, the barrel clamp level features non-marring pads to ensure no damage is done at the contact points.
  • ACCURACY: Reticle leveling is a key component for the accuracy of a scope set up- the Level-Level-Level helps you to do so properly.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Ugotfeels Polishing Lapping Paste 12 Picecs of 5 Gram Syringes, | Diamond Polishing Compound 0.5 to 40 Micron for Removing Scratches & Final Polishing Metal and Jewelry (Oil Based)

  • Grit sizes: 0.5, 1.0, 1.5, 2.5, 3.5, 5, 7, 10, 14, 20, 28, 40 micron..
  • 12 pieces Set of 5 gram Diamond Lapping Paste Polishing Compound..
  • For use on resin, glass, crystal,steel, aluminum, iron, brass, nickel, bronze, stainless steel, jewellery, copper, ceramic, titanium..
  • Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping compounds. Apply with cylinder laps, buffing wheels and bobs, or lapping sticks..
  • Oil-soluble pastes won't cause corrosion.
Check Stock

Rolling tomatoes

  • Diamond Lapping Plate: Featuring a generous 40-inch surface area, this 10 by 4 inch flattening plate easily flattens conventional and waterstone faster than any other method.
  • Diamond Hardcoat Technology: Diamond sharpening plate features a revolutionary new coating designed to outlast any other currently available on the market.
  • Premium Performance: Diamond plate sharpening stone features an agressive (95 micron / 160 mesh) surface that quickly and easily flattens waterstone, oilstone or Arkansas stone.
  • Durable Construction: Lapping plate is designed to provide years of consistent performance and reliable service.
  • Made In The USA: DMT offers the most efficient flattening tools on the planet, tools like this diamond flat plate — the fastest, easiest, and most effective tool for flattening a stone or sharpening an edge.
Check Stock

TechDiamondTools Set of 5 Diamond Compound Polishing Paste 400 1200 4000 14000 50000 Grit for Marble Glass Metal Rock Jewelry Resin Silver Gemstone with 10% of Diamond Powder USA Made

  • OIL-BASED COMPOUND: we offer a set of 5 items 5 gram syringes of industrial quality diamond polishing paste with 10% concentration of diamond powder, professional grade of 400 Grit 54 to 80 Microns for Medium Fast Lapping, 1,200 Grit 12 to 20 Microns for Lapping Metals, 4,000 Grit 2 to 4 Microns for Mirror Finish, 14,000 Grit 0 to 1 Microns and 50,000 Grit 0 to 0,5 Microns for Final Polish..
  • MADE IN USA: Forget other cheap polishing compounds! TechDiamondTools ultra precise, high strength polishing compounds ensure sustainable quality in any kind of application. Keep away from artificially colored abrasives. TechDiamondTools high-tech diamond compound has no color additives. It facilitates faster cutting and is safe for materials with high permeability..
  • USE OUR PRODUCTS AS: polishing compound, stropping compound, epoxy polishing paste, rock polishing compound, lapidary diamond paste, buffing compound, resin polishing, abrasive paste, metal polishing compound, granite compound. Use it both for manual and machine polishing. Best used with the wool buffs or leather strops..
  • SUITABLE FOR ANY SCENARIO: scratch genie, knife polishing compound, micron paste, mirror repair, glass watch scratch remover, watch polishing, crystal polishing, gun polishing, flatten....
Check Stock

Taytools 773444 Set of Three Pieces 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a set of 3 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass..
  • Microfinishing/lapping film will need to be cut to size to fit glass plate.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 279144 One Piece 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a piece of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 773437 Set of Two Pieces 5/16 x 3-1/4 x 8-1/4 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a set of 2 pieces of 5/16 inch thick x 3-1/4 inch x 8-1/4 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Pressure Sensitive Adhesive (PSA) lappping film sheets are recommended as all that is required is to peel off the backing and stick to glass..
  • Microfinishing/lapping film will need to be cut to size to fit float glass plate.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 279151 Two Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a 2 pieces set of of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 279168 Three Pieces 5/16 x 5 x 12 Dead Flat Float Glass for Scary Sharp Sharpening System

  • This is a 3 piece set of of 5/16 inch thick x 5 inch x 12 inch float glass for use as a flat, hard surface in a the Scary Sharpening System.
  • Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Piece will accommodate 1/2 sheet of 8-1/2 x 11 microfinishing or lapping film.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

TechDiamondTools Set of 5 Diamond Compound Polishing Paste 1200 1500 2000 3000 4000 Grit for Marble Glass Metal Rock Jewelry Resin Silver Gemstone with High Concentration of Diamond Powder USA Made

  • OIL-BASED COMPOUND: we offer a set of 5 items 5 gram syringes of industrial quality diamond polishing paste with 50% concentration of diamond powder, professional grade of 1,200 Grit 12 to 20 Microns for Lapping Metals, 1,500 Grit 6 to 12 Microns for Pre Polish, Fine Lapping, 2,000 Grit 4 to 8 Microns and 3,000 Grit 3 to 6 Microns for Fine Polish and 4,000 Grit, 2 to 4 Microns for Mirror Finish..
  • MADE IN USA: Forget other cheap polishing compounds! TechDiamondTools ultra precise, high strength polishing compounds ensure sustainable quality in any kind of application. Keep away from artificially colored abrasives. TechDiamondTools high-tech diamond compound has no color additives. It facilitates faster cutting and is safe for materials with high permeability..
  • USE OUR PRODUCTS AS: polishing compound, stropping compound, epoxy polishing paste, rock polishing compound, lapidary diamond paste, buffing compound, resin polishing, abrasive paste, metal polishing compound, granite compound. Use it both for manual and machine polishing. Best used with the wool buffs or leather strops..
  • SUITABLE FOR ANY SCENARIO: scratch genie, knife polishing compound, micron paste, mirror repair, glass watch scratch remover, watch polishing, crystal polishing, gun polishing, fl....
Check Stock