Top Gm Fueline Disconnect Tool
IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch
- 【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
- 【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
- 【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
- 【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
- 【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
Check StockLisle 35760 Fuel Line Disconnect Tool Tool
- Easily disconnects air conditioning lines and quick connect fuel lines.
- Tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line.
- Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler.
- For more information check the main Lisle tool- 37000.
Check StockLisle 39890 3-Piece Angled Fuel Line Disconnect Set
- Easily disconnects air conditioning lines and quick connect fuel lines.
- Tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line.
- Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler.
- For more information check the main Lisle tool- 37000.
Check StockLisle 42400 Airline Disconnect Set
- Easily disconnects air conditioning lines and quick connect fuel lines.
- Tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line.
- Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler.
- For more information check the main Lisle tool- 37000.
Check StockNEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case
- NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
- Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
- Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check StockABN Automotive SAE Air Conditioner & Fuel Line Quick Disconnect 7pc Tool Kit – Plastic Auto AC/Gas Set 1/4 – 7/8in
- SIMPLE LINE DISCONNECTION: Use the ABN Automotive SAE Air Conditioner & Fuel Line Quick Disconnect 7pc Tool Kit – Plastic Auto AC / Gas Set 1/4 – 7/8” Inch to quickly and easily disconnect air conditioning lines and quick connect fuel lines.
- If you are replacing or repairing the A/C or fuel line on your car or truck, the connectors require these tools.
- VARIOUS SIZES: Variety of sizes to disconnect most any automotive AC or fuel line inner retaining tabs.
- The 7 included tools are SAE standard 1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch, and 7/8-inch in size.
- These SAE sizes will also work on metric applications.
- FITMENT: Disconnects air conditioning line spring lock couplings on Ford, Dodge, and Chrysler cars and pickup trucks.
- Also works on fuel line quick connect couplings on GM, Ford, Dodge, and Chrysler cars and pickup trucks.
- EASY STORAGE: Storage plate with simple transportation, safe storage, and quick organization.
- Each holder peg on plate includes easy-to-read size markings for fast identification.
Check StockOUFKAR 6pcs Fuel Line Disconnect Tool Compatible with Ford GM Mazda, Automotive AC Fuel Line Removal Tool Line Removal Tool Kit 5/16-7/8in
- Function of Fuel Line Disconnect Tool: Master Deluxe AC line disconnect tool Fuel disconnect tool kit offers a wide range of tool sizes to separate oil / fuel lines, quick disconnects on heater lines and AC cooling lines,and it exactly the product needed for fuel filter replacement..
- The Fuel Line Disconnect Tool is widely used:Compatible for most Ford, G.M, Mazd.a, and other vehicles with automatic transmission lines, strong compatibility.A must have tool if you work on vehicles.This product definitely made removing the gas lines off easier.
- The Usability and Design of Fuel Line Disconnect Tool: Each refueling tool is color-coded by size for easy identification.
- six sizes 1/2"-12.7mm (Yellow), 3/4"-19mm (Black), 3/8"-9.5mm (Blue), 5/8"-16mm (Green), 7/8"-22.2mm (Red), 5/16"-8mm (Copper), They are nicely colored so you can see what size they are if you're in a tight spot..
- Exquisite Workmanship of Fuel Line Disconnect Tool: Each fuel line quick disconnect heater hose disconnect tool is made of hard plastic with high strength and long life, which can prevent rust and corrosion..
- Easy to Use of Fuel Line Disconnect Tool: Fuel Line Disconnect spring end and unique offset design can enter the narrow or blocked area that is difficult to reach, and quickly sep....
Check StockOTC (3054E) Noid Lite/IAC Test Kit
- Simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles.
- Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine.
- A flashing light indicates normal pulsing voltage.
- Expanded set of eight specific Noid Lites covers: GM PFI, Ford TBI, Geo TBI, Bosch PFI, GM TBI, GM SCPI, and now new applications of Bosch 2 and Multec 2, plus two GM IAC testers (flat and square four connector applications) with red and green LEDs.
- Includes a molded plastic case and harness extension that allows for convenient remote viewing from the driver’s seat.
Check StockOrion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler
- ... This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check StockOrion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles
- ... This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
- COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
- the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
- DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
- each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
- WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
- the two forcing screws also work with most VW vehicles’ power steering systems.
- USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check StockDynamic FLK-38 Automotive Replacement Fuel Line Repair Kit 3/8 in (10mm), 23 Pack , Black
- Save Time and Money with the Dynamic FLK-38 3/8" Nylon or Steel Fuel Line Repair Kit.
- QTY 2, 3/8" NYLON TO STEEL COMPRESSION UNIOn.
- QTY 2, 3/8" QUICK DISCONNECT TO STEEL TO NYLON.
Check Stockobd1 to obd2 Adapter,for GM OBD1 12 Pins to OBD2 16 Pins Diagnostic Tool Connector Adapter Cable
- 【Specifically for】Car Diagnostic Extension Cable has high practicality, which is used specifically for connecting your scanner and your vehicle, specifically for GM vehicles.Please note that this item is just a cable, not a scanner or diagnostic tool..
- 【Product Specification】Type: cables, adapters & sockets, connector: GM 12 pins male, connector.
- OBDII 16pins female connector, car maker: Compatible with GM, item length: 41.5cm / 16.3", package weight: 102g..
- 【Standard Specification】OBD1 12 Pins to OBD2 16 Pins Conform to strict quality control standards,12 Pins to 16 Pins Diagnostic Cable dependable to use.Car 12 Pins To 16 Pins OBD Cable Manufactured according to the original specifications.Built to meet standard specification,GM 12 Pins To 16 Pins Cable strictly follow factory quality control..
- 【Easy to Use】12 Pin to 16 Pin OBD1 OBD2 Connector Adapter Cable is easy to use, its GM 12 pins allows you to connect a GM vehicle with a OBD1 12 pins socket with your existing OBD2 16 pins tool....
Check Stock