Top Go Kart Torque Converter

New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4 Bore Max Torque

  • This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a....
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP.
  • Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine....
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help....
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is....
Check Stock

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

  • 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
  • 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Drive....
Check Stock

40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines

  • The ROP Shop replacement 40 Series Go Kart Torque Converter Kit for Manco 2432 for Many 8HP-18HP Engines.
  • Specs - 7 1/2" Diameter. 3/4" Bore. 3/16" Key. Engagement Range: 1600- 3300 RPM. Refer to images 2 & 3 for more information.
  • Includes - (1) Backplate, (1) Integrated Jackshaft, (1) 10T Sprocket, (1) 1" Driver Clutch Pulley, (1) 3/4" Driven Clutch Pulley, (1) Drive Belt, (1)....
  • Fits 8HP-18HP Go Kart engines with 1" Straight Crankshaft & 1/4" Keyway, if this converter kit is used on engines larger than 18hp, the belt will burn....
  • For some units, the driven clutch will need flipped around when mounted, please refer to image 7 for reference.
Check Stock

Drive Belt For Coleman Powersports KT196 Go Kart Buggy 4 Wheelers 196cc 6.5HP

  • Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters. Fits many converter 30 series Torq-a-verter drive systems..
  • Used On Most Manco, American Sportworks and Ken-bar Karts with 5Hp-7Hp engines. Also used on the Comet Tav2 bolt on Torque-a-verter kit..
  • Compatible with torque converters with a 6" distance between the driven pulley and the driver clutch. This distance is measured from the center of each pulley. Not compatible with units with a distance of 7" center to center distance. The belt is asymmetric with a 3/4" wide top face, 18 degree angle on one side, 2.5 degree angle on the other side..
Check Stock

MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4' Bore 10T #40/41/420 China (Complete 3/4' Torque Converter Set)

  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft..
  • Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors..
  • Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain.
  • This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
Check Stock

40 Series Go Kart Torque Converter Kit,COMPLETE-Bolt On Back Plate,40 Driver and Driven Pulleys,Belt,Cover,Hardware,Fits 8-18hp Motors 1 Shaft,TC40-100 10t-12t Sprockets-Replaces 203015,203015A

  • 40 Series Torque Converter Kit - Easy to install bolt on go kart torque converter kit that fits nearly all 8HP - 18HP engines..
  • NO JACKSHAFT REQUIRED - Includes Bullet Lines' bolt on 40 series back plate with an integrated jackshaft..
  • COMPLETE KIT - This is a complete 40 series torque converter kit that includes: Easy Bolt On Back Plate, 40 Series 1" Driver Pulley, 40 Series 5/8"....
  • FITS GO KARTS - 8HP - 18HP Motors with a 1" Straight Crankshaft, and 1/4" Keyway. Replaces OEM Part Numbers 203015, 203015A.
  • INSTALL - Bolt-on 40 series back plate with integrated jackshaft will save you time and money. DRIVER PULLEY CAN BE INSTALLED BACKWARDS TO LINE UP....
Check Stock

Sibosen Torque Converter for Predator 212CC, 3/4' Go Kart Comet CVT Clutch 10T 40/41 and 12T 35 Chain Engine Drive Replacement Set of 30 Series

  • ✅Quality Ensurance for More Power: This go-kart torque converter is made of high-quality iron and aluminum material which is lightweighted, sturdy and durable while allows higher speeds out of small engine, and smoother acceleration. This clutch will help you get more power out of your small engine by reducing engine load..
  • ✅Complete Parts for Easy Assembly: This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Important parts have been assemblied.
  • ✅Universally Fit: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.
  • ✅Package Includes: 1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
Check Stock

SUNROAD 40 Series Go Kart Torque Converter Clutch Kit Replacement for Comet Manco 5/8 Bore Max Torque

  • Replacement for Go Karts 40 series Engine Comet Manco.
  • Replacement for 5/8 inch Engine Shaft,Work with OE 203785 203788 chain.
  • 5/8" bore designed Replacement for 6.5hp 212CC engines.
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation.
  • Package included:1 x Go Kart Torque Converter Kit and 1 x Chain.
Check Stock

AlveyTech 5/8' Shaft Series 30 Torque Converter Driven Clutch for Coleman KT196 & CK196 196cc 6.5 Hp Go-Karts

  • This Comet TAV2 Series 30 style driven or secondary clutch pulley works in conjunction with a 3/4" shaft driver clutch and an asymmetrical drive belt..
  • Our 5/8" shaft Series 30 torque converter driven clutch for the Coleman KT196 and CK196 196cc 6.5 Hp go-kart is a high-quality aftermarket component of the go-kart's drive system..
Check Stock

labwork Go Kart Forward Reverse Gearbox Kit Replacement for 2HP-13HP Engine Local 30 Series 2300rpm 4 Stroke 30 Series Torque Converter 35 Chain Go Karts Accessories 212cc Gearbox

  • Go Kart Forward Reverse Gearbox Kit Replacement for 2HP-13HP Engine Local 30 Series 2300rpm..
  • Replacement for 2HP-13HP Engine 4 Stroke Forward Reverse Gearbox 30 Series Torque Converter 35 Chain Go Karts Accessories 212cc Gearbox..
  • Easy to install: This go-kart forward reverse gearbox is easy to install, suitable for people who like DIY assembly of karts, just follow the operation to complete the installation and use..
  • This go-kart reverse kit is made of high-quality metal with guaranteed quality..
  • Package includes: 1 x gearbox with 3/16 keyway, 1 x gear lever assembly, 1 x gearshift disc, 2 x transmission lines, 2 x sprocket wheels, and 2 x mounting plates..
Check Stock

BLACKHORSE-RACING 30 Series Bore GO Kart CVT Torque Converter 3/4' Bore 6' Diameter Driven Asymmetric Go Kart Mini Bike + 5/8'' Driven Clutch Comet Kit + 725 Belt

  • ▲5/8″ Clutch 6″ Driven 30 Series Torque Converter: Part Number(Comet 219457a),6″ Diameter, 5/8″ Shaft Bore, 8hp Max.
  • ▲30 Series Torque Converter Driver Clutch, 3/4″ Bore, Replaces Comet 219552, 5957.
  • ▲ Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201W.
  • ▲ Perfect replacement driver clutch for small engines with up to 7 HP,Fitment: Mini Bike, Go Kart, Lawnmower And Many More.
  • ▲ Brand new high quality 30 series asymmetrical driven clutch with 3/16” key way and 3/4” ID hole..
Check Stock

Go Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP

  • 40 Series Clutch Pulley Driver Driven 8-18 HP.
  • Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
  • Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
  • Includes: All mounting hardware attached to an easy to mount backing plate.
Check Stock